ADIS16COM1/PCBZ
ADIS16COM1/PCBZ Datasheet
ADIS16COM1/PCBZ Breakout Board Wiki Guide OVERVIEW The ADIS16COM1/PCBZ provides a breakout function for the ADIS16000CMLZ, which pairs with the ADIS16229AMLZ to provide the sensor, signal processing and transceiver function for a wireless vibration sensing system. Here is a picture of the contents that come with the ADIS16COM1/PCBZ.
| Part | Datasheet |
|---|---|
ADIS16COM1/PCBZ |
ADIS16COM1/PCBZ (pdf) |
| PDF Datasheet Preview |
|---|
| One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106 • Tel • Fax • ADIS16COM1/PCBZ Breakout Board Wiki Guide OVERVIEW The ADIS16COM1/PCBZ provides a breakout function for the ADIS16000CMLZ, which pairs with the ADIS16229AMLZ to provide the sensor, signal processing and transceiver function for a wireless vibration sensing system. Here is a picture of the contents that come with the ADIS16COM1/PCBZ. ADIS16COM1/PCBZ MOUNTING HOLES The ADIS16COM1/PCBZ provides 4 mounting holes that line up with mounting “A” Labeled holes on the EVAL-ADIS and supports the following products ADIS16000AMLZ ADIS16229AMLZ products. Please see the following picture for device mounting hole locations. EVAL-ADIS Mounting Use the M2x0.4x6mm machine screws provided in pink bag ANALOGKIT2 for mounting the ADIS16COM1/PCBZ to the EVAL-ADIS and set their torque for 20 inch-ounces. The red-highlights in the top-view picture illustrate the location of the mounting holes. ADIS16000 Mounting on ADIS16COM1/PCBZ Use the M3x0.5x12mm machine screws and M3x.5x Hex nuts with the M3 washers optional provided in pink bag ANALOGKIT2 for mounting ADIS16000AMLZ product to the ADIS16COM1/PCBZ and set their torque for 20 inch-ounces. The red-highlights in the top-view picture illustrate the location of the mounting holes for these products. Attach the 16 pin ribbon cable included with the EVAL-ADIS to connect the J1 connectors. For high-vibration environments, consider using more than 2 screws, per AN-1045 WARNING Make sure that the connector pins are in alignment with J1 on the EVAL-ADIS and J1 on the ADIS16COM1/PCBZ, before pressing it into place. Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. |
| More datasheets: 2222 462 81502 | 2222 464 86809 | 2222 464 76809 | 2222 462 71502 | 2222 460 81003 | 2222 460 81503 | 2222-460-43603 | 5110 | ACPM-7311-BLKR | ACPM-7311-OR1 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADIS16COM1/PCBZ Datasheet file may be downloaded here without warranties.