TowerPro SG90C 360 Degree Micro Servo 1.6Kg SKU:SER0043
Part | Datasheet |
---|---|
![]() |
SER0043 (pdf) |
PDF Datasheet Preview |
---|
TowerPro SG90C 360 Degree Micro Servo 1.6Kg SKU:SER0043 INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo’s operation is more similar to a DC motor than a standard servo as only rotation direction and speed can be controlled. There is also no hardware stop inside so that the shaft can rotate freely. Compared to an ordinary DC motor, a 360degree servo motor does not require additional motor drivers and is plug and play, compact and convenient. Arduino control methods are also the same. When the servo is operating on the ~ 6V power supply, the torque can reach ~ 1.6Kg x cm SPECIFICATION • Operating Voltage - 6.0V • Supply Voltage 4.8V ~ 6.0V • Dead Zone Width 5usec • Working Speed 0.12sec/60 4.8V no load • Stall Torque 1.2kg/cm 4.8V , 1.6kg/cm 6.0V • Neutral Location 1500us • Interface Description • Brown GND • Red VCC • Orange S • Cable Length 250mm • Operating Temperature -30°C to + 60°C • Dimensions x 30 mm /0.89x0.48x1.18” • Weight 9±1g SHIPPING LIST • TowerPro SG90C 360 Degree Micro Servo 1.6Kg x1 • Accessories x1 5-4-17 |
More datasheets: CFVE-A7BP-155.52TS | CFVE-A7BP-156.25TS | CFVE-A7BP-212.5TS | CFVE-A7BP-622.08TS | CFVE-A7BP-311.04TS | AT91SAM7A2-AU | AK7770EQ | 18046TT | FQB70N08TM | FMG1G75US60H |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SER0043 Datasheet file may be downloaded here without warranties.