SEN0172

SEN0172 Datasheet


Gravity:Analog Light Sensor LX1972 SKU SEN0172

Part Datasheet
SEN0172 SEN0172 SEN0172 (pdf)
PDF Datasheet Preview
Gravity:Analog Light Sensor LX1972 SKU SEN0172

INTRODUCTION

Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system. A light sensor measures the level of light in a room or ambient light in a space. This analog light sensor uses LX1972 as its ambient light sensing part, with spectral response that closely emulates human eyes. It helps you to detect the light density and reflects the analog voltage signal back to Arduino controller. You can set the threshold of voltage level to trig other units on Arduino project.

Notice The new version of analog sensor port pin mapping has been changed as the following two features.
• Near Human Eye Spectral Response and Very Low IR Sensitivity
• Temperature Stable
• Scalable Output Voltage
• Output with Low Fitler <50Hz

SPECIFICATION
• Supply Voltage DC 3~5.5V
• Operating Temperature -40~80°C
• Illumination Range 1 800Lux
• Output analog voltage, 0 3.6V
• Module Size 30 x 22mm 1.18x0.87"

SHIPPING LIST
• Analog Light Sensor LX1972 x1
• Analog Sensor Cable x1

Powered By DFRobot 2008-2017
More datasheets: EL0500(TA) | EL0501(TA) | 10827R | MSA-1105-TR1 | MSA-1105-TR1G | MSA-1105-STRG | 12017 | FM20P5X | FM20S3X | 4171001XX-3


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SEN0172 Datasheet file may be downloaded here without warranties.

Datasheet ID: SEN0172 509089