MSA-1105-STRG

MSA-1105-STRG Datasheet


Agilent MSA-1105 Cascadable Silicon Bipolar MMIC Amplifier

Part Datasheet
MSA-1105-STRG MSA-1105-STRG MSA-1105-STRG (pdf)
Related Parts Information
MSA-1105-TR1 MSA-1105-TR1 MSA-1105-TR1
MSA-1105-TR1G MSA-1105-TR1G MSA-1105-TR1G
PDF Datasheet Preview
Agilent MSA-1105 Cascadable Silicon Bipolar MMIC Amplifier

Data Sheet

The MSA-1105 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a low cost, surface mount plastic package. This MMIC is designed for high dynamic range in either 50 or 75 systems by combining low noise figure with high IP3. Typical applications include narrow and broadband linear amplifiers in commercial and industrial systems.

The MSA-series is fabricated using Agilent’s 10 GHz fT, 25 GHz fMAX silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility.
05 Plastic Package
• High Dynamic Range Cascadable 50 or 75 Gain Block
• 3 dB Bandwidth 50 MHz to GHz
• dBm Typical P1 dB at GHz
• dB Typical Noise Figure at GHz
• Surface Mount Plastic Package
• Tape-and-Reel Packaging Option Available
• Lead-free Option Available

Typical Biasing Configuration

R bias

VCC > 8 V

C block IN
3 1 MSA

RFC Optional

C block Vd = V

MSA-1105 Absolute Maximum Ratings

Parameter

Absolute Maximum[1]

Device Current
80 mA

Power Dissipation[2,3]
550 mW

RF Input Power
+13 dBm

Junction Temperature
150°C

Storage Temperature
to 150°C

Notes Permanent damage may occur if any of these limits are exceeded.

TCASE = 25°C. Derate at 8 mW/°C for TC > 124°C.

Thermal Resistance[2] = 125°C/W

Electrical Specifications[1], TA = 25°C

Parameters and Test Conditions Id = 60 mA, ZO = 50

Power Gain |S21| 2
f = GHz f = GHz f = GHz
f3 dB

Gain Flatness 3 dB Bandwidth[2]
Ordering Information

Part Numbers No. of Devices Comments

MSA-1105-STR

Bulk

MSA-1105-STRG

Bulk

MSA-1105-TR1
7" Reel

MSA-1105-TR1G
7" Reel

MSA-1105-TR2
1500
13" Reel

MSA-1105-TR2G
1500
13" Reel

Note Order part number with a “G” suffix if lead-free option is desired.

MSA-1105 Typical Scattering Parameters ZO = 50 TA = 25°C, Id = 60 mA

Freq.
dB Mag Ang
dB Mag Ang

Mag Ang
171 51 163 15 174 4 174 2 170 3 162 5 154 7 146 8 138 8 131 10 123 11 116 11 109 11 102 11
72 7 48 0 28 11
170 151 134 122

G p dB

Typical Performance, TA = 25°C, ZO = 50
unless otherwise noted

TC = +85°C

TC = +25°C

ZO = 50
80 TC =

Id mA

ZO = 75

FREQUENCY GHz

Figure Typical Power Gain vs. Frequency, Id = 60 mA.

Figure Device Current vs. Voltage.
22 20 Id = 70 mA 18 Id = 60 mA
14 Id = 40 mA

FREQUENCY GHz

Figure Output Power at 1 dB Gain Compression vs. Frequency.
More datasheets: HFBR-4402 | HFBR-0416 | HFBR-0414 | HFBR-0400 | EL0452(TA) | EL0500(TA) | EL0501(TA) | 10827R | MSA-1105-TR1 | MSA-1105-TR1G


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MSA-1105-STRG Datasheet file may be downloaded here without warranties.

Datasheet ID: MSA-1105-STRG 520483