MSA-1105-TR1G
MSA-1105-TR1G Datasheet
Agilent MSA-1105 Cascadable Silicon Bipolar MMIC Amplifier
| Part | Datasheet |
|---|---|
MSA-1105-TR1G |
MSA-1105-TR1G (pdf) |
| Related Parts | Information |
|---|---|
MSA-1105-TR1 |
MSA-1105-TR1 |
MSA-1105-STRG |
MSA-1105-STRG |
| PDF Datasheet Preview |
|---|
| Agilent MSA-1105 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet The MSA-1105 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a low cost, surface mount plastic package. This MMIC is designed for high dynamic range in either 50 or 75 systems by combining low noise figure with high IP3. Typical applications include narrow and broadband linear amplifiers in commercial and industrial systems. The MSA-series is fabricated using Agilent’s 10 GHz fT, 25 GHz fMAX silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. 05 Plastic Package • High Dynamic Range Cascadable 50 or 75 Gain Block • 3 dB Bandwidth 50 MHz to GHz • dBm Typical P1 dB at GHz • dB Typical Noise Figure at GHz • Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available • Lead-free Option Available Typical Biasing Configuration R bias VCC > 8 V C block IN 3 1 MSA RFC Optional C block Vd = V MSA-1105 Absolute Maximum Ratings Parameter Absolute Maximum[1] Device Current 80 mA Power Dissipation[2,3] 550 mW RF Input Power +13 dBm Junction Temperature 150°C Storage Temperature to 150°C Notes Permanent damage may occur if any of these limits are exceeded. TCASE = 25°C. Derate at 8 mW/°C for TC > 124°C. Thermal Resistance[2] = 125°C/W Electrical Specifications[1], TA = 25°C Parameters and Test Conditions Id = 60 mA, ZO = 50 Power Gain |S21| 2 f = GHz f = GHz f = GHz f3 dB Gain Flatness 3 dB Bandwidth[2] Ordering Information Part Numbers No. of Devices Comments MSA-1105-STR Bulk MSA-1105-STRG Bulk MSA-1105-TR1 7" Reel MSA-1105-TR1G 7" Reel MSA-1105-TR2 1500 13" Reel MSA-1105-TR2G 1500 13" Reel Note Order part number with a “G” suffix if lead-free option is desired. MSA-1105 Typical Scattering Parameters ZO = 50 TA = 25°C, Id = 60 mA Freq. dB Mag Ang dB Mag Ang Mag Ang 171 51 163 15 174 4 174 2 170 3 162 5 154 7 146 8 138 8 131 10 123 11 116 11 109 11 102 11 72 7 48 0 28 11 170 151 134 122 G p dB Typical Performance, TA = 25°C, ZO = 50 unless otherwise noted TC = +85°C TC = +25°C ZO = 50 80 TC = Id mA ZO = 75 FREQUENCY GHz Figure Typical Power Gain vs. Frequency, Id = 60 mA. Figure Device Current vs. Voltage. 22 20 Id = 70 mA 18 Id = 60 mA 14 Id = 40 mA FREQUENCY GHz Figure Output Power at 1 dB Gain Compression vs. Frequency. |
| More datasheets: HFBR-4411 | HFBR-4402 | HFBR-0416 | HFBR-0414 | HFBR-0400 | EL0452(TA) | EL0500(TA) | EL0501(TA) | 10827R | MSA-1105-TR1 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MSA-1105-TR1G Datasheet file may be downloaded here without warranties.