SEN0032

SEN0032 Datasheet


Triple Axis Accelerometer Breakout ADXL345 SKU:SEN0032

Part Datasheet
SEN0032 SEN0032 SEN0032 (pdf)
PDF Datasheet Preview
Triple Axis Accelerometer Breakout ADXL345 SKU:SEN0032

Contents
• 1 Introduction
• 2 Specification
• 3 Application
• 4 Connection Diagram
• 5 Sample Code
• 6 Result

Introduction

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution 13-bit measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI 3- or 4-wire or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tiltsensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution 4 mg/LSB enables measurement of inclination changes less than Several special sensing functions are provided. Activity and inactivity sensing detect the presence or
lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out FIFO buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.

Specification
• Working voltage 3.3~6V
• Current consumption 40uA / working mode, 0.1uA / standby mode
• Communication interface I2C / SPI 3 or4 lines
• Size 20x15mm

Application
• Tap/Double Tap Detection
• Free-Fall Detection
• Selecting Portrait and Landscape Modes
• Tilt sensing

Connection Diagram

This diagram is an IIC connection method suitable with Arduino UNO. It would be differen if you use other Arduino Controllers which the SCL & SDA pin might be different. And if you want to use SPI interface, please refer to ADXL345 datasheet for more info.

Connection Diagram

By the way, we have collected some useful 3-axis data processing methods How to Use a ThreeAxis Accelerometer for Tilt Sensing.

Result

Open the Serial monitor to see the 3-axis acceleration data and Roll-Pitch angle. See changs as you sway the Accelerometer.

Result in Arduino IDE serial monitor

Powered By DFRobot 2008-2017
More datasheets: HLMP-CB11-UVCDD | HLMP-CM37-X1BZZ | LF-A-25 | A6A595KLBTR | A6A595KLB | A6A595KA | 74LVQ174SJ | 74LVQ174SJX | 74LVQ174SCX | 74LVQ174SC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SEN0032 Datasheet file may be downloaded here without warranties.

Datasheet ID: SEN0032 509046