KIT0051

KIT0051 Datasheet

Insectbot Kit

Part	Datasheet
KIT0051	KIT0051 (pdf)

PDF Datasheet Preview
Insectbot Kit SKU KIT0051 INTRODUCTION The Insect Bot mini is an easy to assemble robot for young engineers from 6 to With assembling this robot you will learn the basic robotics in terms of how all the components work together. There is a microcontroller which is working as the robot brain and two servo motors for the movement. The IR sensor on it's head will act as an eye to detect obstacles in front. The programming can be done by simply connecting the Beetle controller with the USB port on your computer. It is the best way to start building robot on Arduino. Assembling parts The brain of Insectbot is "world’s smallest Leonardo", a.k.a. Beetle. It is ideal for DIY projects, wearable projects and etc. Its body is made up of two 9-gram servos powered by a rechargable 3.7V LiPo battery. Its eyes are an infrared sensor to detect obstacles. It requires no special tools except a soldering iron, scissors, screwdriver, pliers. You can decorate your Insectbot Mini to give him a unique, cute or funny Christmas outfit. We also provide a step-bystep instruction to help you assemble it. Beetle and Beetle Shield Programming for Insectbot We provide 3 programming languages for you such as Ardublock, Mind+ and Arduino IDE. For beginners, you can program it simply by dragging and dropping pre-designed blocks visa visual programming softwares Ardublock and Mind+. For advanced DIYers, you also modify Arduino IDE for your liking. Programming Insectbot with Ardublock Programming Insectbot with Arduino IDE Tools Needed: • Soldering iron • Scissors • Screwdriver • Pliers Note tools are not included in the kit Check this guide if your sensor wiring is switched. SHIPPING LIST • 1x Beetle Arduino compatible • 1x Beetle Shield • 2x 9g Micro Servo • 1x Sharp IR Sensor • 1x LiPo Battery 3.7V/ 180mAh + Charger • 2x Steel Wire 200mm x 1 mm 7.87"x0.039" • 1x ABS Sheet 50x50mm 1.97"x1.97" • 1x Double Sided Foam • 5x Cable Tie 1.8x100mm90.07x3.93' • 1x Cable Tie 4x200mm 0.16x7.87' Powered By DFRobot 2008-2017

PDF Datasheet Preview

Insectbot Kit

SKU KIT0051

INTRODUCTION The Insect Bot mini is an easy to assemble robot for young engineers from 6 to With assembling this robot you will learn the basic robotics in terms of how all the components work together. There is a microcontroller which is working as the robot brain and two servo motors for the movement. The IR sensor on it's head will act as an eye to detect obstacles in front. The programming can be done by simply connecting the Beetle controller with the USB port on your computer. It is the best way to start building robot on Arduino. Assembling parts The brain of Insectbot is "world’s smallest Leonardo", a.k.a. Beetle. It is ideal for DIY projects, wearable projects and etc. Its body is made up of two 9-gram servos powered by a rechargable 3.7V LiPo battery. Its eyes are an infrared sensor to detect obstacles. It requires no special tools except a soldering iron, scissors, screwdriver, pliers. You can decorate your Insectbot Mini to give him a unique, cute or funny Christmas outfit. We also provide a step-bystep instruction to help you assemble it.

Beetle and Beetle Shield Programming for Insectbot We provide 3 programming languages for you such as Ardublock, Mind+ and Arduino IDE. For beginners, you can program it simply by dragging and dropping pre-designed blocks visa visual programming softwares Ardublock and Mind+. For advanced DIYers, you also modify Arduino IDE for your liking.

Programming Insectbot with Ardublock

Programming Insectbot with Arduino IDE

Tools Needed:
• Soldering iron
• Scissors
• Screwdriver
• Pliers

Note tools are not included in the kit Check this guide if your sensor wiring is switched.

SHIPPING LIST
• 1x Beetle Arduino compatible
• 1x Beetle Shield
• 2x 9g Micro Servo
• 1x Sharp IR Sensor
• 1x LiPo Battery 3.7V/ 180mAh + Charger
• 2x Steel Wire 200mm x 1 mm 7.87"x0.039"
• 1x ABS Sheet 50x50mm 1.97"x1.97"
• 1x Double Sided Foam
• 5x Cable Tie 1.8x100mm90.07x3.93'
• 1x Cable Tie 4x200mm 0.16x7.87'

Powered By DFRobot 2008-2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived KIT0051 Datasheet file may be downloaded here without warranties.

Datasheet ID: KIT0051 509012