SKU FIT0247
Part | Datasheet |
---|---|
![]() |
FIT0247 (pdf) |
PDF Datasheet Preview |
---|
5mm Aluminum Timing Pulley For 3D Printer 2 pcs SKU FIT0247 INTRODUCTION This is an 20 tooth timing pulley with a center diameter of 5mm this is a good fit for mounting on common stepper motors. These pullies are great for many mechanical projects. They are also commonly used in 3D printers. SPECIFICATION • Teeth 20 • Inner diameter 5mm 0.2" • Teeth diameter 12.5mm • Teeth Width 6.8mm • Outer diameter 15 mm • Fastening screws M3 x2 SHIPPING LIST • 5mm Aluminum Timing Pulley For 3D Printer x2 • M4 embedded screw x4 Powered By DFRobot 2008-2016 |
More datasheets: AT24C128Y1-10YI-2.7 | AT24C256-10TI-1.8 | AT24C128Y1-10YI-1.8 | AT24C256W-10SI-2.7 | AT24C256-10PI-2.7 | 2540021 | FDQ7236AS | 7343-2USOC/H2/S400-A6 | AS1325-BSTT-50 | AS1325-BSTT-33 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FIT0247 Datasheet file may be downloaded here without warranties.