Analog Piezo Disk Vibration Sensor SKU:DFR0052
Part | Datasheet |
---|---|
![]() |
DFR0052 (pdf) |
PDF Datasheet Preview |
---|
Analog Piezo Disk Vibration Sensor SKU:DFR0052 Contents • 1 Introduction • 2 Specification • 3 Tutorial Connection diagram Sample Code Result Introduction The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration. Specification Power supply Not necessary to power the module Interface Analog Current less than 1mA Weight 10g Tutorial Connection diagram Pin Definition Sample Code void setup Serial.begin 9600 // void loop int val; val=analogRead 0 ;//Connect the sensor to analog pin 0 Serial.println val,DEC ;// delay 100 ; Result When pressure is applied not to the piezoelectric ceramics, the analog output of 0 when pressure is applied to the piezoelectric ceramics, the analog output will send the change, but as the pressure increases. For any questions/advice/cool ideas to share, please visit DFRobot Forum. Powered By DFRobot 2008-2017 |
More datasheets: CY7C199C-15VC | CY7C199C-15ZC | CY7C199C-15VI | CY7C199C-12VI | CY7C199C-12VC | CY7C199C-15PXC | GTB028EUB16 | W4024-760 | W4012-760 | ABX00012 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0052 Datasheet file may be downloaded here without warranties.