ABX00012

ABX00012 Datasheet

Code ABX00012

Part	Datasheet
ABX00012	ABX00012 (pdf)

PDF Datasheet Preview
ARDUINO MKR ZERO I2S BUS & SD FOR SOUND, MUSIC & DIGITAL AUDIO DATA Code ABX00012 MKR ZERO has an SD connector with dedicated SPI interfaces SPI1 that allows you to play with MUSIC files with no extra hardware! Watch out music makers, we’ve got some news for you! We have released two libraries for your enjoyment: • Arduino Sound library a simple way to play and analyze audio data using Arduino on SAM boards. • I2S library to use the I2S protocol on boards. For those who don’t know, I2S Sound is an electrical serial bus interface standard for connecting digital audio devices. The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about application development. It has an SD connector with dedicated SPI interfaces SPI1 that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a ARM M0+ core. Warning Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. The board contains everything needed to support the microcontroller simply connect it to a computer with a cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists. • TECH SPECS Microcontroller SAMD21 32bit low power ARM MCU Board Power Supply USB/VIN Supported Battery * single cell, 3.7V, 700mAh minimum DC Current for 3.3V Pin 600mA DC Current for 5V Pin 600mA Circuit Operating Voltage 3.3V Digital I/O Pins PWM Pins 12 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 or 18 A4 19 UART Analog Input Pins 7 ADC 8/10/12 bit Analog Output Pins 1 DAC 10 bit External Interrupts 8 0, 1, 4, 5, 6, 7, 8, A1 A2 or 17 DC Current per I/O Pin Flash Memory 256 KB Flash Memory for Bootloader SRAM 32 KB EEPROM Clock Speed kHz RTC , 48 MHz LED_BUILTIN

PDF Datasheet Preview

ARDUINO MKR ZERO I2S BUS & SD FOR SOUND, MUSIC & DIGITAL AUDIO DATA

Code ABX00012

MKR ZERO has an SD connector with dedicated SPI interfaces SPI1 that allows you to play with MUSIC files with no extra hardware!

Watch out music makers, we’ve got some news for you! We have released two libraries for your enjoyment:
• Arduino Sound library a simple way to play and analyze audio data using Arduino on SAM boards.
• I2S library to use the I2S protocol on boards. For those who don’t know, I2S Sound is an electrical serial bus interface standard for connecting digital audio devices.

The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about application development. It has an SD connector with dedicated SPI interfaces SPI1 that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a ARM M0+ core.

Warning Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

The board contains everything needed to support the microcontroller simply connect it to a computer with a cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists.
• TECH SPECS

Microcontroller

SAMD21 32bit low power ARM MCU

Board Power Supply USB/VIN

Supported Battery *
single cell, 3.7V, 700mAh minimum

DC Current for 3.3V Pin
600mA

DC Current for 5V Pin
600mA

Circuit Operating Voltage
3.3V

Digital I/O Pins

PWM Pins
12 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 or 18 A4 19

UART

Analog Input Pins
7 ADC 8/10/12 bit

Analog Output Pins
1 DAC 10 bit

External Interrupts
8 0, 1, 4, 5, 6, 7, 8, A1 A2 or 17

DC Current per I/O Pin

Flash Memory
256 KB

Flash Memory for Bootloader

SRAM
32 KB

EEPROM

Clock Speed
kHz RTC , 48 MHz

LED_BUILTIN

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ABX00012 Datasheet file may be downloaded here without warranties.

Datasheet ID: ABX00012 518325