MB91F479BGL-GE1

MB91F479BGL-GE1 Datasheet

FR60 MB91470/480 Series

Part	Datasheet
MB91F479BGL-GE1	MB91F479BGL-GE1 (pdf)

PDF Datasheet Preview
FUJITSU MICROELECTRONICS DATA SHEET DS07-16901-4Ea 32-bit Microcontrollers CMOS FR60 MB91470/480 Series MB91482/F475/F478/F479/F482/F487/ MB91FV470 • DESCRIPTION The MB91470/480 series is Fujitsu's general-purpose 32-bit RISC microcontroller, which is designed for embedded control applications that require high-speed processing performance. This series uses the FR60 CPU, which is compatible with the FR* family of CPUs. * FR is a line of products of FUJITSU MICROELECTRONICS Limited. • FEATURES • FR60 CPU • 32-bit RISC, load/store architecture, five-stage pipeline • Operating frequency of 80 MHz PLL clock multiplied • 16-bit fixed-length instructions basic instructions • Instruction execution speed one instruction per cycle • Memory-to-memory transfer, bit processing, barrel shift instructions, etc. instructions suitable for embedded applications • Function entry and exit instructions, multi load/store instructions of register contents instructions compatible with C language. • Register interlock function to facilitate assembly-language coding • Built-in multiplier/instruction-level support • Signed 32-bit multiplication 5 cycles • Signed 16-bit multiplication 3 cycles • Interrupts save PC and PS 6 cycles, 16 priority levels • Harvard architecture allowing program access and data access to be executed simultaneously • Instructions compatible with the FR family Continued Be sure to refer to the “Check Sheet” for the latest cautions on development. “Check Sheet” is seen at the following support page “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development. Copyright 2006-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved MB91470/480 Series • Built-in Peripheral functions • Combinations of built-in Flash/ROM and RAM capacities MB91470 series MB91480 series 144 pins 100 pins Flash memory product MASK ROM product Flash memory product MASK ROM product 256 Kbytes/16 Kbytes MB91F475 MB91F482 MB91482 384 Kbytes/24 Kbytes MB91F478 512 Kbytes/32 Kbytes MB91F479 MB91F487 • I/O ports • NMI Non Maskable Interrupt • External interrupts • Bit search module for REALOS Function to search for the position of the first bit that has changed from 1 to 0 in a word starting from the MSB The mode data set in the mode vector must be stored as byte data at 0x000FFFF8H. The data should be located in the highest byte from bit 31 to bit 24 because the FR family uses big endian byte ordering. bit 31 24 23 16 15 Incorrect 0x000FFFF8H Mode data Correct 0x000FFFF8H 0x000FFFFCH Mode data Reset vector MB91470/480 Series • I/O MAP [How to read the table] Address Register PDR0 [R/W] B PDR1 [R/W] B PDR2 [R/W] B PDR3 [R/W] B Block T-unit Port data register Read/write attribute, Access unit B byte, H half word, W word Initial value of register after reset Register name column 1 of the register is at address 4n, column 2 is at address 4 n + Leftmost register address For word-length access, column 1 of the register is the MSB of the data. Note Initial values of register bits are represented as follows “ 1 ” Initial Value “ 1 ” “ 0 ” Initial Value “ 0 ” “ X ” Initial Value “ undefined ” “ - ” No physical register at this location Access to addresses where the data access properties have not been documented is prohibited. MB91470/480 Series Address 000010H 000014H 000018H to 00003CH PDR0 [R/W] B, H, W PDR5 [R/W] B, H, W PDRA [R/W] B, H, W PDRE [R/W] B, H, W PDRJ [R/W] B, H, W PDRP [R/W] B, H, W Register PDR1 [R/W] B, H, W PDR2 [R/W] B, H, W PDR6 [R/W] B, H, W ------XX PDR8 [R/W] B, H, W PDRB [R/W] B, H, W PDRC [R/W] B, H, W PDRF [R/W] B, H, W PDRG [R/W] B, H, W • ORDERING INFORMATION Part No. MB91F475PMC1-GE1 MB91F475BGL-GE1 MB91F478PMC1-GE1 MB91F478BGL-GE1 MB91F479PMC1-GE1 MB91F479BGL-GE1 MB91F487PMC-GE1 MB91F482PMC-GE1 MB91482PMC-GE1 Package FPT-144P-M12 BGA-144P-M06 FPT-144P-M12 BGA-144P-M06 FPT-144P-M12 BGA-144P-M06 FPT-100P-M20 MB91470/480 Series • PACKAGE DIMENSIONS 100-pin plastic LQFP FPT-100P-M20 Lead pitch Package width x package length Lead shape mm x mm Gullwing Sealing method Plastic mold Mounting height mm Max Weight Code Reference g P-LFQFP100-14x14-0.50 100-pin plastic LQFP FPT-100P-M20 16.00±0.20 .630±.008 SQ 14.00±0.10 .551±.004 SQ 51 50 Note 1 These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder. INDEX Details of "A" part Mounting height Stand off C 2005 FUJITSU LIMITED F100031S-c-2-1 Please confirm the latest Package dimension by following URL. Dimensions in mm inches . Note The values in parentheses are reference values Continued MB91470/480 Series 144-pin plastic LQFP FPT-144P-M12 Lead pitch Package width x package length Lead shape mm x mm Gullwing Sealing method Plastic mold 86 • ORDERING INFORMATION Changed the “• ORDERING INFORMATION”. The vertical lines marked in the left side of the page show the changes. MEMO MB91470/480 Series MB91470/480 Series MEMO MEMO MB91470/480 Series MB91470/480 Series FUJITSU MICROELECTRONICS LIMITED Shinjuku Dai-Ichi Seimei Bldg. 7-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo 163-0722, Japan Tel +81-3-5322-3347 Fax +81-3-5322-3387 For further information please contact: North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel +1-408-737-5600 Fax +1-408-737-5999 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD. 151 Lorong Chuan, #05-08 New Tech Park, Singapore 556741 Tel +65-6281-0770 Fax +65-6281-0220 Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, Germany Tel +49-6103-690-0 Fax +49-6103-690-122 Korea FUJITSU MICROELECTRONICS KOREA LTD. 206 KOSMO TOWER, 1002 Daechi-Dong, Kangnam-Gu,Seoul 135-280 Korea Tel +82-2-3484-7100 Fax +82-2-3484-7111 FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. Rm.3102, Bund Center, No.222 Yan An Road E , Shanghai 200002, China Tel +86-21-6335-1560 Fax +86-21-6335-1605 FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 10/F., World Commerce Centre, 11 Canton Road Tsimshatsui, Kowloon Hong Kong Tel +852-2377-0226 Fax +852-2376-3269 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited Strategic Business Development Dept.

PDF Datasheet Preview

FUJITSU MICROELECTRONICS DATA SHEET

DS07-16901-4Ea
32-bit Microcontrollers

CMOS

FR60 MB91470/480 Series

MB91482/F475/F478/F479/F482/F487/ MB91FV470
• DESCRIPTION

The MB91470/480 series is Fujitsu's general-purpose 32-bit RISC microcontroller, which is designed for embedded control applications that require high-speed processing performance.

This series uses the FR60 CPU, which is compatible with the FR* family of CPUs.
* FR is a line of products of FUJITSU MICROELECTRONICS Limited.
• FEATURES
• FR60 CPU
• 32-bit RISC, load/store architecture, five-stage pipeline
• Operating frequency of 80 MHz PLL clock multiplied
• 16-bit fixed-length instructions basic instructions
• Instruction execution speed one instruction per cycle
• Memory-to-memory transfer, bit processing, barrel shift instructions, etc. instructions suitable for embedded applications
• Function entry and exit instructions, multi load/store instructions of register contents instructions compatible with C language.
• Register interlock function to facilitate assembly-language coding
• Built-in multiplier/instruction-level support
• Signed 32-bit multiplication 5 cycles
• Signed 16-bit multiplication 3 cycles
• Interrupts save PC and PS 6 cycles, 16 priority levels
• Harvard architecture allowing program access and data access to be executed simultaneously
• Instructions compatible with the FR family

Continued

Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development.

Copyright 2006-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved

MB91470/480 Series
• Built-in Peripheral functions
• Combinations of built-in Flash/ROM and RAM capacities

MB91470 series

MB91480 series
144 pins
100 pins

Flash memory product

MASK ROM product

Flash memory product

MASK ROM product
256 Kbytes/16 Kbytes

MB91F475

MB91F482

MB91482
384 Kbytes/24 Kbytes

MB91F478
512 Kbytes/32 Kbytes

MB91F479

MB91F487
• I/O ports
• NMI Non Maskable Interrupt
• External interrupts
• Bit search module for REALOS

Function to search for the position of the first bit that has changed from 1 to 0 in a word starting from the MSB
The mode data set in the mode vector must be stored as byte data at 0x000FFFF8H. The data should be located in the highest byte from bit 31 to bit 24 because the FR family uses big endian byte ordering.
bit 31
24 23
16 15

Incorrect 0x000FFFF8H

Mode data

Correct 0x000FFFF8H 0x000FFFFCH

Mode data

Reset vector

MB91470/480 Series
• I/O MAP
[How to read the table]

Address

Register

PDR0 [R/W] B PDR1 [R/W] B PDR2 [R/W] B PDR3 [R/W] B

Block

T-unit Port data register

Read/write attribute, Access unit B byte, H half word, W word

Initial value of register after reset

Register name column 1 of the register is at address 4n, column 2 is at address 4 n + Leftmost register address For word-length access, column 1 of the register is the MSB of the data.

Note Initial values of register bits are represented as follows “ 1 ” Initial Value “ 1 ” “ 0 ” Initial Value “ 0 ” “ X ” Initial Value “ undefined ” “ - ” No physical register at this location Access to addresses where the data access properties have not been documented is prohibited.

MB91470/480 Series

Address
000010H
000014H 000018H
to 00003CH

PDR0 [R/W] B, H, W

PDR5 [R/W] B, H, W

PDRA [R/W] B, H, W

PDRE [R/W] B, H, W

PDRJ [R/W] B, H, W

PDRP [R/W] B, H, W

Register

PDR1 [R/W] B, H, W

PDR2 [R/W] B, H, W

PDR6 [R/W] B, H, W ------XX

PDR8 [R/W] B, H, W

PDRB [R/W] B, H, W

PDRC [R/W] B, H, W

PDRF [R/W] B, H, W

PDRG [R/W] B, H, W
• ORDERING INFORMATION

Part No. MB91F475PMC1-GE1 MB91F475BGL-GE1 MB91F478PMC1-GE1 MB91F478BGL-GE1 MB91F479PMC1-GE1 MB91F479BGL-GE1 MB91F487PMC-GE1 MB91F482PMC-GE1 MB91482PMC-GE1

Package FPT-144P-M12 BGA-144P-M06 FPT-144P-M12 BGA-144P-M06 FPT-144P-M12 BGA-144P-M06

FPT-100P-M20

MB91470/480 Series
• PACKAGE DIMENSIONS
100-pin plastic LQFP

FPT-100P-M20

Lead pitch

Package width x package length

Lead shape
mm x mm

Gullwing

Sealing method

Plastic mold

Mounting height
mm Max

Weight

Code Reference
g P-LFQFP100-14x14-0.50
100-pin plastic LQFP FPT-100P-M20
16.00±0.20 .630±.008 SQ *14.00±0.10 .551±.004 SQ
51 50

Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder.

INDEX

Details of "A" part

Mounting height

Stand off

C 2005 FUJITSU LIMITED F100031S-c-2-1

Please confirm the latest Package dimension by following URL.

Dimensions in mm inches . Note The values in parentheses are reference values

Continued

MB91470/480 Series
144-pin plastic LQFP FPT-144P-M12

Lead pitch

Package width x package length

Lead shape
mm x mm

Gullwing

Sealing method

Plastic mold
86
• ORDERING INFORMATION
Changed the “• ORDERING INFORMATION”.

The vertical lines marked in the left side of the page show the changes.

MEMO

MB91470/480 Series

MB91470/480 Series

MEMO

MEMO

MB91470/480 Series

MB91470/480 Series

FUJITSU MICROELECTRONICS LIMITED

Shinjuku Dai-Ichi Seimei Bldg. 7-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo 163-0722, Japan Tel +81-3-5322-3347 Fax +81-3-5322-3387

For further information please contact:

North and South America FUJITSU MICROELECTRONICS AMERICA, INC. 1250 E. Arques Avenue, M/S 333 Sunnyvale, CA 94085-5401, U.S.A. Tel +1-408-737-5600 Fax +1-408-737-5999

Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD. 151 Lorong Chuan, #05-08 New Tech Park, Singapore 556741 Tel +65-6281-0770 Fax +65-6281-0220

Europe FUJITSU MICROELECTRONICS EUROPE GmbH Pittlerstrasse 47, 63225 Langen, Germany Tel +49-6103-690-0 Fax +49-6103-690-122

Korea FUJITSU MICROELECTRONICS KOREA LTD. 206 KOSMO TOWER, 1002 Daechi-Dong, Kangnam-Gu,Seoul 135-280 Korea Tel +82-2-3484-7100 Fax +82-2-3484-7111

FUJITSU MICROELECTRONICS SHANGHAI CO., LTD. Rm.3102, Bund Center, No.222 Yan An Road E , Shanghai 200002, China Tel +86-21-6335-1560 Fax +86-21-6335-1605

FUJITSU MICROELECTRONICS PACIFIC ASIA LTD. 10/F., World Commerce Centre, 11 Canton Road Tsimshatsui, Kowloon Hong Kong Tel +852-2377-0226 Fax +852-2376-3269

All Rights Reserved.
The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Strategic Business Development Dept.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB91F479BGL-GE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB91F479BGL-GE1 635671