MB39A123PMT-G-JN-EFE1

MB39A123PMT-G-JN-EFE1 Datasheet

MB39A123

Part	Datasheet
MB39A123PMT-G-JN-EFE1	MB39A123PMT-G-JN-EFE1 (pdf)

Related Parts	Information
MB39A123PMT-G-JNE1	MB39A123PMT-G-JNE1

PDF Datasheet Preview
FUJITSU MICROELECTRONICS DATA SHEET DS04-27257-2Ea ASSP For Power Supply Applications 6 ch DC/DC Converter IC with Synchronous Rectification MB39A123 • DESCRIPTION MB39A123 is a 6-channel DC/DC converter IC using pulse width modulation PWM , and it is suitable for up conversion, down conversion, and up/down conversion. MB39A123 is built in 6 channels into BCC-48++/LQFP48P package and this IC can control and soft-start at each channel. MB39A123 is suitable for power supply of high performance potable instruments such as a digital still camera DSC . • FEATURES • Supports for step-down with synchronous rectification ch.1 • Supports for step-down and up/down Zeta conversion ch.2 to ch.4 • Supports for step-up and up/down Sepic conversion ch.5, ch.6 • Negative voltage output Inverting amplifier ch.4 • Low voltage start-up ch.5, ch.6 V • Power supply voltage range V to 11 V • Reference voltage V ± 1% • Error amplifier reference voltage V ± 1% ch.1 , V ± 1% ch.2 to ch.6 • Oscillation frequency range 200 kHz to MHz • Standby current 0 µA Typ • Built-in soft-start circuit independent of loads • Built-in totem-pole type output for MOS FET • Short-circuit detection capability by external signal −INS terminal • Two types of packages BCC-48 pin 1 type, LQFP-48 pin 1 type • APPLICATIONS • Digital still camera DSC • Digital video camera DVC • Surveillance camera etc. Copyright 2006-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved MB39A123 • PIN ASSIGNMENTS TOP VIEW VCC CS3 −INE3 FB3 DTC3 DTC2 FB2 −INE2 CS2 CS1 −INE1 FB1 CTL1 CTL2 CTL3 CTL4 CTL5 CTL6 −INS VREF GND RT CT 48 47 46 45 44 43 42 41 40 39 38 13 14 15 16 17 18 19 20 21 22 23 24 25 VCCO OUT1-1 OUT1-2 OUT2 OUT3 OUT4 OUT5 OUT6 GNDO CS6 −INE6 • ORDERING INFORMATION Part number MB39A123PMT-❏❏❏E1 MB39A123PVK-❏❏❏E1 Package 48-pin plastic LQFP FPT-48P- M26 48-pin plastic BCC LCC-48P-M08 Remarks Lead Free version Lead Free version • EV BOARD ORDERING INFORMATION EV board part No. MB39A123EVB-02 Remarks LQFP-48P • RoHS COMPLIANCE INFORMATION OF LEAD Pb FREE VERSION The LSI products of Fujitsu Microelectronics with “E1” are compliant with RoHS Directive , and has observed the standard of lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls PBB , and polybrominated diphenyl ethers PBDE The product that conforms to this standard is added “E1” at the end of the part number. • MARKING FORMAT LEAD FREE VERSION MB39A123 MB3 9A123 XXXX XXX INDEX Lead Free version LQFP-48P FPT-48P-M26 J APA N MB 3 9A 123 XXXX XXX INDEX BCC-48++ LCC-48P-M08 Lead Free version MB39A123 • LABELING SAMPLE LEAD FREE VERSION Lead-free mark JEITA logo JEDEC logo MB123456P - 789 - GE1 3N 1MB123456P-789-GE1 1000 3N 2 1561190005 107210 1,000 MB123456P - 789 - GE1 QC PASS 2006/03/01 ASSEMBLED IN JAPAN MB123456P - 789 - GE1 1/1 0605 - Z01A 1000 1561190005 Lead Free version MB39A123 • MB39A123PMT-❏❏❏E1, MB39A123PVK-❏❏❏E1 RECOMMENDED CONDITIONS OF MOISTURE SENSITIVITY LEVEL Item Condition Mounting Method IR infrared reflow , Manual soldering partial heating method Mounting times The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited Strategic Business Development Dept.

PDF Datasheet Preview

FUJITSU MICROELECTRONICS DATA SHEET

DS04-27257-2Ea

ASSP For Power Supply Applications
6 ch DC/DC Converter IC with Synchronous Rectification

MB39A123
• DESCRIPTION

MB39A123 is a 6-channel DC/DC converter IC using pulse width modulation PWM , and it is suitable for up conversion, down conversion, and up/down conversion. MB39A123 is built in 6 channels into BCC-48++/LQFP48P package and this IC can control and soft-start at each channel. MB39A123 is suitable for power supply of high performance potable instruments such as a digital still camera DSC .
• FEATURES
• Supports for step-down with synchronous rectification ch.1
• Supports for step-down and up/down Zeta conversion ch.2 to ch.4
• Supports for step-up and up/down Sepic conversion ch.5, ch.6
• Negative voltage output Inverting amplifier ch.4
• Low voltage start-up ch.5, ch.6 V
• Power supply voltage range

V to 11 V
• Reference voltage

V ± 1%
• Error amplifier reference voltage V ± 1% ch.1 , V ± 1% ch.2 to ch.6
• Oscillation frequency range
200 kHz to MHz
• Standby current
0 µA Typ
• Built-in soft-start circuit independent of loads
• Built-in totem-pole type output for MOS FET
• Short-circuit detection capability by external signal −INS terminal
• Two types of packages BCC-48 pin 1 type, LQFP-48 pin 1 type
• APPLICATIONS
• Digital still camera DSC
• Digital video camera DVC
• Surveillance camera
etc.

Copyright 2006-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved

MB39A123
• PIN ASSIGNMENTS

TOP VIEW

VCC CS3 −INE3 FB3 DTC3 DTC2 FB2 −INE2 CS2 CS1 −INE1 FB1

CTL1 CTL2 CTL3 CTL4 CTL5 CTL6 −INS VREF GND

RT CT
48 47 46 45 44 43 42 41 40 39 38
13 14 15 16 17 18 19 20 21 22 23 24 25

VCCO OUT1-1 OUT1-2 OUT2 OUT3 OUT4 OUT5 OUT6 GNDO CS6 −INE6
• ORDERING INFORMATION

Part number MB39A123PMT-❏❏❏E1

MB39A123PVK-❏❏❏E1

Package
48-pin plastic LQFP FPT-48P- M26
48-pin plastic BCC LCC-48P-M08

Remarks Lead Free version Lead Free version
• EV BOARD ORDERING INFORMATION

EV board part No. MB39A123EVB-02

Remarks LQFP-48P
• RoHS COMPLIANCE INFORMATION OF LEAD Pb FREE VERSION

The LSI products of Fujitsu Microelectronics with “E1” are compliant with RoHS Directive , and has observed the standard of lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls PBB , and polybrominated diphenyl ethers PBDE

The product that conforms to this standard is added “E1” at the end of the part number.
• MARKING FORMAT LEAD FREE VERSION

MB39A123

MB3 9A123 XXXX XXX

INDEX

Lead Free version

LQFP-48P FPT-48P-M26

J APA N

MB 3 9A 123 XXXX XXX

INDEX

BCC-48++ LCC-48P-M08

Lead Free version

MB39A123
• LABELING SAMPLE LEAD FREE VERSION

Lead-free mark

JEITA logo

JEDEC logo

MB123456P - 789 - GE1
3N 1MB123456P-789-GE1 1000
3N 2 1561190005 107210
1,000

MB123456P - 789 - GE1

QC PASS
2006/03/01

ASSEMBLED IN JAPAN

MB123456P - 789 - GE1
1/1 0605 - Z01A 1000
1561190005

Lead Free version

MB39A123
• MB39A123PMT-❏❏❏E1, MB39A123PVK-❏❏❏E1 RECOMMENDED CONDITIONS OF MOISTURE SENSITIVITY LEVEL

Item

Condition

Mounting Method

IR infrared reflow , Manual soldering partial heating method

Mounting times
The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Strategic Business Development Dept.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB39A123PMT-G-JN-EFE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB39A123PMT-G-JN-EFE1 635656