ICS307M-02T

ICS307M-02T Datasheet

ICS307-01/-02

Part	Datasheet
ICS307M-02T	ICS307M-02T (pdf)

Related Parts	Information
ICS307M-02IT	ICS307M-02IT
ICS307M-02I	ICS307M-02I
ICS307M-02	ICS307M-02

PDF Datasheet Preview
SERIALLY PROGRAMMABLE CLOCK SOURCE DATASHEET ICS307-01/-02 The ICS307-01 and ICS307-02 are versatile serially programmable clock sources which take up very little board space. They can generate any frequency from 6 to 200 MHz and have a second configurable output. The outputs can be reprogrammed on the fly and will lock to a new frequency in 10 ms or less. Smooth transitions in which the clock duty cycle remains near 50% are guaranteed if the output divider is not changed. The devices includes a PDTS pin which tri-states the output clocks and powers down the entire chip. The ICS307-02 features a default clock output at start-up and is recommended for all new designs. This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output skew, use the ICS527-01. • Packaged in 16-pin 150 mil wide SOIC • ICS307M-02 and -02I available in Pb lead free package • Highly accurate frequency generation • Serially programmable user determines the output frequency via a 3 wire interface • Eliminates need for custom quartz • Input crystal frequency of 5 - 27 MHz • Output clock frequencies up to 200 MHz • Power down tri-state mode • Very low jitter • Operating voltage of V or 5 V • 25 mA drive capability at TTL levels • Industrial temperature version available NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram SCLK DATA STROBE X1/ICLK Crystal or clock input X2 V8:V0 2 Shift Register 3 C1:C0 S2:S0 F1:F0 R6:R7 Crystal Oscillator Reference Divider Optional crystal capacitors VCO Divider Phase Comparator, Charge Pump, and Loop Filter Output Divider 3 S2:S0 Function Select 3 F1:F0 CLK1 PDTS CLK2 IDT / ICS SERIALLY PROGRAMMABLE CLOCK SOURCE ICS307-01/-02 SERIALLY PROGRAMMABLE CLOCK SOURCE SER PROG CLOCK SYNTHESIZER Pin Assignment X1/ICLK CLK2 SCLK PDTS Ordering Information Part / Order Number 307M-01* 307M-01T* 307M-01I* 307M-01IT* 307M-02* 307M-02T* 307M-02LF 307M-02LFT 307M-02I* 307M-02IT* 307M-02ILF 307M-02ILFT Marking ICS307M-01 ICS307M-01 ICS307M-01I ICS307M-01I ICS307M-02 ICS307M-02 ICS307M-02LF ICS307M-02LF ICS307M-02I ICS307M-02I 307M-02ILF 307M-02ILF Shipping packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC Temperature 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS SERIALLY PROGRAMMABLE CLOCK SOURCE ICS307-01/-02 SERIALLY PROGRAMMABLE CLOCK SOURCE SER PROG CLOCK SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

SERIALLY PROGRAMMABLE CLOCK SOURCE

DATASHEET

ICS307-01/-02

The ICS307-01 and ICS307-02 are versatile serially programmable clock sources which take up very little board space. They can generate any frequency from 6 to 200 MHz and have a second configurable output. The outputs can be reprogrammed on the fly and will lock to a new frequency in 10 ms or less. Smooth transitions in which the clock duty cycle remains near 50% are guaranteed if the output divider is not changed.

The devices includes a PDTS pin which tri-states the output clocks and powers down the entire chip.

The ICS307-02 features a default clock output at start-up and is recommended for all new designs.

This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output skew, use the ICS527-01.
• Packaged in 16-pin 150 mil wide SOIC
• ICS307M-02 and -02I available in Pb lead free
package
• Highly accurate frequency generation
• Serially programmable user determines the output
frequency via a 3 wire interface
• Eliminates need for custom quartz
• Input crystal frequency of 5 - 27 MHz
• Output clock frequencies up to 200 MHz
• Power down tri-state mode
• Very low jitter
• Operating voltage of V or 5 V
• 25 mA drive capability at TTL levels
• Industrial temperature version available

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

SCLK DATA STROBE

X1/ICLK

Crystal or clock input X2

V8:V0
2 Shift Register 3

C1:C0 S2:S0 F1:F0

R6:R7

Crystal Oscillator

Reference Divider

Optional crystal capacitors

VCO Divider

Phase Comparator, Charge Pump, and

Loop Filter

Output Divider
3 S2:S0

Function Select
3 F1:F0

CLK1 PDTS

CLK2

IDT / ICS SERIALLY PROGRAMMABLE CLOCK SOURCE

ICS307-01/-02 SERIALLY PROGRAMMABLE CLOCK SOURCE

SER PROG CLOCK SYNTHESIZER

Pin Assignment

X1/ICLK

CLK2

SCLK

PDTS
Ordering Information

Part / Order Number 307M-01* 307M-01T* 307M-01I* 307M-01IT* 307M-02* 307M-02T* 307M-02LF
307M-02LFT 307M-02I* 307M-02IT* 307M-02ILF
307M-02ILFT

Marking ICS307M-01 ICS307M-01 ICS307M-01I ICS307M-01I ICS307M-02 ICS307M-02 ICS307M-02LF ICS307M-02LF ICS307M-02I ICS307M-02I 307M-02ILF 307M-02ILF

Shipping packaging Tubes

Tape and Reel Tubes

Tape and Reel Tubes

Tape and Reel Tubes

Tape and Reel Tubes

Tape and Reel Tubes

Tape and Reel

Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC

Temperature 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS SERIALLY PROGRAMMABLE CLOCK SOURCE

ICS307-01/-02 SERIALLY PROGRAMMABLE CLOCK SOURCE

SER PROG CLOCK SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS307M-02T Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS307M-02T 636975