MB95F332HWQN-G-SNE1

MB95F332HWQN-G-SNE1 Datasheet


MB95F332H/F332K/F333H/F333K/F334H/F334K

Part Datasheet
MB95F332HWQN-G-SNE1 MB95F332HWQN-G-SNE1 MB95F332HWQN-G-SNE1 (pdf)
Related Parts Information
MB95F334KP-G-SH-SNE2 MB95F334KP-G-SH-SNE2 MB95F334KP-G-SH-SNE2
MB95F334KPMC-G-SNE2 MB95F334KPMC-G-SNE2 MB95F334KPMC-G-SNE2
MB95F333KPMC-G-SNE2 MB95F333KPMC-G-SNE2 MB95F333KPMC-G-SNE2
MB95F332KP-G-SH-SNE2 MB95F332KP-G-SH-SNE2 MB95F332KP-G-SH-SNE2
MB95F332KPMC-G-SNE2 MB95F332KPMC-G-SNE2 MB95F332KPMC-G-SNE2
MB95F333KP-G-SH-SNE2 MB95F333KP-G-SH-SNE2 MB95F333KP-G-SH-SNE2
MB95F334KWQN-G-SNE1 MB95F334KWQN-G-SNE1 MB95F334KWQN-G-SNE1
MB95F332KWQN-G-SNE1 MB95F332KWQN-G-SNE1 MB95F332KWQN-G-SNE1
PDF Datasheet Preview
MB95F332H/F332K/F333H/F333K/F334H/F334K

F2MC-8FX MB95330H Series 8-bit Microcontrollers

MB95330H is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of this series contain a variety of peripheral resources.

F2MC-8FX CPU core

Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instructions
• Bit manipulation instructions, etc.

Clock
• Selectable main clock source Main OSC clock up to MHz, maximum machine clock frequency MHz External clock up to MHz, maximum machine clock frequency MHz Main CR clock MHz ±2%, maximum machine clock frequency MHz
• Selectable subclock source Sub-OSC clock kHz External clock kHz Sub-CR clock Typ 100 kHz, Min 50 kHz, Max 200 kHz

Timer
• 8/16-bit composite timer 2 channels
• 8/16-bit PPG 3 channels
• 16-bit PPG 1 channel can work independently or together with the multi-pulse generator
• 16-bit reload timer 1 channel can work independently or together with the multi-pulse generator
• Time-base timer 1 channel
• Watch prescaler 1 channel

UART/SIO 1 channel
• Full duplex double buffer
• Capable of clock-asynchronous UART serial data transfer and clock-synchronous SIO serial data transfer

I2C 1 channel
• Built-in wake-up function

Multi-pulse generator MPG for DC motor control 1 channel
• 16-bit reload timer 1 channel
• 16-bit PPG timer 1 channel
• Waveform sequencer including a 16-bit timer equipped with a buffer and a compare clear function

LIN-UART
• Full duplex double buffer
• Capable of clock-synchronous serial data transfer and clock-asynchronous serial data transfer

External interrupt 10 channels
• Interrupt by edge detection rising edge, falling edge, and both edges can be selected
• Can be used to wake up the device from different low power consumption standby modes
8/10-bit A/D converter 8 channels
• 8-bit and 10-bit resolution can be chosen.

Low power consumption standby modes
• Stop mode
• Sleep mode
• Watch mode
• Time-base timer mode

I/O port
Clock Timing 33 Source Clock/Machine Clock 35 External Reset 37 Power-on Reset 37 Peripheral Input Timing 38 LIN-UART Timing 39 Low-voltage Detection 44 I2C Timing 46 UART/SIO, Serial I/O Timing 49 MPG Input Timing 50 A/D Converter 50 A/D Converter Electrical Characteristics 50 Notes on Using the A/D Converter 51 Definitions of A/D Converter Terms 52 Flash Memory Write/Erase Characteristics 55 Sample Characteristics 56 Mask Options 61 Ordering Information 62

Package Dimension

Page 3 of 66

MB95330H Series

Product Line-up

MB95F332H MB95F333H MB95F334H MB95F332K MB95F333K MB95F334K

Parameter

Type

Flash memory product

Clock supervisor counter

It supervises the main clock oscillation.

Program ROM capacity
8 Kbyte
12 Kbyte
20 Kbyte
8 Kbyte
12 Kbyte

RAM capacity
240 bytes
496 bytes
1008 bytes
240 bytes
496 bytes

Low-voltage detection reset

Reset input

Dedicated

Selected by software

CPU functions

Number of basic instructions Instruction bit length Instruction length Data bit length Minimum instruction execution time Interrupt processing time
136 8 bits 1 to 3 bytes 1, 8 and 16 bits ns with machine clock = MHz µs with machine clock = MHz

General-purpose I/O

I/O ports Max 28 CMOS I/O 25 N-ch open drain 3

I/O ports Max 29 CMOS I/O 25 N-ch open drain 4

Time-base timer Interrupt cycle ms to s when external clock = 4 MHz

Hardware/software watchdog timer

Reset generation cycle Main oscillation clock at 10 MHz 105 ms Min The sub-CR clock can be used as the source clock of
hardware watchdog
timer.

Wild register

It can be used to replace three bytes of data.

LIN-UART
Ordering Information

MB95F332HPMC-G-SNE2 MB95F332KPMC-G-SNE2 MB95F333HPMC-G-SNE2 MB95F333KPMC-G-SNE2 MB95F334HPMC-G-SNE2 MB95F334KPMC-G-SNE2

MB95F332HP-G-SH-SNE2 MB95F332KP-G-SH-SNE2 MB95F333HP-G-SH-SNE2 MB95F333KP-G-SH-SNE2 MB95F334HP-G-SH-SNE2 MB95F334KP-G-SH-SNE2

MB95F332HWQN-G-SNE1 MB95F332KWQN-G-SNE1 MB95F333HWQN-G-SNE1 MB95F333KWQN-G-SNE1 MB95F334HWQN-G-SNE1 MB95F334KWQN-G-SNE1
32-pin plastic LQFP FPT-32P-M30
32-pin plastic SH-DIP-32P-M06
32-pin plastic QFN LCC-32P-M19

Package

MB95330H Series

Page 61 of 66

Package Dimension
32-pin plastic LQFP

MB95330H Series

Lead pitch Package width x package length

Lead shape

Sealing method

Mounting height
mm x mm

Gullwing Plastic mold mm MAX

FPT-32P-M30
32-pin plastic LQFP FPT-32P-M30
9.00±0.20 .354±.008 SQ * 7.00±0.10 .276±.004 SQ

Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder.

INDEX

Details of "A" part MAX Mounting height MAX

C 2009 FUJITSU MICROELECTRONICS LIMITED F32051S-c-1-1

Dimensions in mm inches . Note The values in parentheses are reference values.

Page 62 of 66
32-pin plastic SH-DIP

MB95330H Series

Lead pitch Low space Sealing method
mm Plastic mold

DIP-32P-M06
32-pin plastic SH-DIP-32P-M06

INDEX

Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness.

MAX.

C 2003-2008 FUJITSU MICROELECTRONICS LIMITED D32018S-c-1-2

MIN.
0~15°

Dimensions in mm inches . Note The values in parentheses are reference values
More datasheets: HT-14-14S | HT-15-38 | HT-16-38 | 74F113PC | AT17F16A-30JC | AT17F16A-30JI | A000062 | MB95F334KP-G-SH-SNE2 | MB95F334KPMC-G-SNE2 | MB95F333KPMC-G-SNE2


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB95F332HWQN-G-SNE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB95F332HWQN-G-SNE1 508304