CWR-134-14-0001

CWR-134-14-0001 Datasheet

How to Or der DIP Con n ector s CWR-XXX-XX-XXXX

Part	Datasheet
CWR-134-14-0001	CWR-134-14-0001 (pdf)

Related Parts	Information
CWR-130-40-0000	CWR-130-40-0000
CWR-130-24-0000	CWR-130-24-0000
CWR-130-14-0000	CWR-130-14-0000
CWR-130-16-0000	CWR-130-16-0000
CWR-134-14-0003	CWR-134-14-0003
CWR-130-14-0003	CWR-130-14-0003
CWR-130-16-0003	CWR-130-16-0003
CWR-130-40-0003	CWR-130-40-0003
CWR-130-24-0003	CWR-130-24-0003
CWR-134-16-0001	CWR-134-16-0001

PDF Datasheet Preview
DIP Connectors The CW Dual-In-Line Plug DIP connector is used for rapid, permanent connection of ribbon cable to a PC board or to a standard DIP socket when connect/disconnect capabilities are required. The cover is factory preassembled to the connector base to simplify assembly to cable and has ridges for cable alignment. CW DIP connectors are Mil-DTL-83503/6 approved. • Beveled corner on cover and base at pin #1 provides orientation and contact identification. • No alignment tools required. Cable fits snugly between base’s cover-support posts, and is guided into position by ridges molded into inner surface of cover. • No special cable preparation required. Factory preassembled cover minimizes assembly time. Cable is inserted and terminated in one simple step. • Sturdy terminal posts are strong, yet flexible enough to withstand occasional bending and straightening without fatigue. • No “bare shoulders”. No exposure of unnecessary sections of the contact and possible shorting at the PC board interface. • 130 James Way, Southampton, PA 18966 - 3838 • Telephone 215 355-7080 • Fax 215 355-1088 • DIP Connectors Con tact • Patented offset tines produce Torq-Tite termination for added reliability. • Double barbs bite into plastic, retaining contact firmly in insulator. • Spring-temper phosphor bronze contact material resists breakage during bending or straightening operations. • Two tail lengths are available for use with standard or low profile DIP sockets. in. x in. contact crosssection provides proper mating with a variety of DIP sockets. DIP Con n ector Featur es • Mil-DTL-83503/6 approved • One-piece construction. • 14, 16, 24,and 40 pin versions. • Patented Torq-Tite contacts, ensure reliable gas-tight terminations. • Gold-plated phosphor bronze contacts, standard tin-lead plated contacts optional. • Accepts 28-30 AWG stranded or solid conductors. • Simple assembly bench press or low cost hand tool is all that’s needed for terminating cable and connectors. • All pin numbers clearly marked and legible before and after assembly. Numbering is arranged to meet MIL-DTL-83503 specifications for standard IC DIP numbering. • Optional strain relief clips are easily installed. Allows top center, vertical cable routing to reduce possibility of damage to contact pins during removal of DIP from socket. • Two contact tail lengths available in. standard or optional 130 in. length for mating with low profile Dip Sockets. Str ain Relief Optional metal strain relief straps are available. Connection is isolated from mechanical strain by the bend in the cable, as it is folded over the top of the assembled connector. The Strain Relief Strap is placed over the cable and snaps into a recess on the connector. A centralized top cable exit is created in the finished cable assembly. Con tact Iden tification Every contact position is numbered, per MilDTL-83503, for easy identification. In addition, a beveled corner at pin #1 enhances orientation of the connector to the mating DIP Socket, even in blind installations. Asse m bl y The CT200 DIP Hand Tool is designed to terminate out 14 and 16 pin DIP Connectors. It is easy to use, lightweight and compact, making it an ideal tool for field replacement work or low volume assembly applications. DIP connectors can also be assembled to cable using CW’s CT301 76/84 Bench Press. • 130 James Way, Southampton, PA 18966 - 3838 • Telephone 215 355-7080 • Fax 215 355-1088 • 31 DIP Connectors En gin eer in g Dimen sion s Dimen sion s 14/16 Pin DIP Connector NOTCHED CORNER ORIENTS No. 1 CONTACT LOCATION. 14 CONTACT POSITIONS SHOWN, ALSO AVAILABLE WITH 16 POSITIONS. 7 6 54 321 STRAIN RELIEF STRAP-OPTIONAL

PDF Datasheet Preview

DIP Connectors

The CW Dual-In-Line Plug DIP connector is used for rapid, permanent connection of ribbon cable to a PC board or to a standard DIP socket when connect/disconnect capabilities are required. The cover is factory preassembled to the connector base to simplify assembly to cable and has ridges for cable alignment. CW DIP connectors are Mil-DTL-83503/6 approved.
• Beveled corner on cover and base at pin #1 provides orientation and contact identification.
• No alignment tools required. Cable fits snugly between base’s cover-support posts, and is guided into position by ridges molded into inner surface of cover.
• No special cable preparation required. Factory preassembled cover minimizes assembly time. Cable is inserted and terminated in one simple step.
• Sturdy terminal posts are strong, yet flexible enough to withstand occasional bending and straightening without fatigue.
• No “bare shoulders”. No exposure of unnecessary sections of the contact and possible shorting at the PC board interface.
• 130 James Way, Southampton, PA 18966 - 3838
• Telephone 215 355-7080
• Fax 215 355-1088
•

DIP Connectors

Con tact
• Patented offset tines produce Torq-Tite termination for added reliability.
• Double barbs bite into plastic, retaining contact firmly in insulator.
• Spring-temper phosphor bronze contact material resists breakage during bending or straightening operations.
• Two tail lengths are available for use with standard or low profile DIP sockets. in. x in. contact crosssection provides proper mating with a variety of DIP sockets.

DIP Con n ector Featur es
• Mil-DTL-83503/6 approved
• One-piece construction.
• 14, 16, 24,and 40 pin versions.
• Patented Torq-Tite contacts, ensure reliable gas-tight terminations.
• Gold-plated phosphor bronze contacts, standard tin-lead plated contacts optional.
• Accepts 28-30 AWG stranded or solid conductors.
• Simple assembly bench press or low cost hand tool is all that’s needed for terminating cable and connectors.
• All pin numbers clearly marked and legible before and after assembly. Numbering is arranged to meet MIL-DTL-83503 specifications for standard IC DIP numbering.
• Optional strain relief clips are easily installed. Allows top center, vertical cable routing to reduce possibility of damage to contact pins during removal of DIP from socket.
• Two contact tail lengths available in. standard or optional 130 in. length for mating with low profile Dip Sockets.

Str ain Relief

Optional metal strain relief straps are available. Connection is isolated from mechanical strain by the bend in the cable, as it is folded over the top of the assembled connector. The Strain Relief Strap is placed over the cable and snaps into a recess on the connector. A centralized top cable exit is created in the finished cable assembly.

Con tact Iden tification

Every contact position is numbered, per MilDTL-83503, for easy identification. In addition, a beveled corner at pin #1 enhances orientation of the connector to the mating DIP Socket, even in blind installations.

Asse m bl y

The CT200 DIP Hand Tool is designed to terminate out 14 and 16 pin DIP Connectors. It is easy to use, lightweight and compact, making it an ideal tool for field replacement work or low volume assembly applications. DIP connectors can also be assembled to cable using CW’s CT301 76/84 Bench Press.
• 130 James Way, Southampton, PA 18966 - 3838
• Telephone 215 355-7080
• Fax 215 355-1088
• 31

DIP Connectors

En gin eer in g Dimen sion s

Dimen sion s
14/16 Pin DIP Connector

NOTCHED CORNER ORIENTS No. 1 CONTACT LOCATION.
14 CONTACT POSITIONS SHOWN, ALSO

AVAILABLE WITH 16 POSITIONS.
7 6 54 321

STRAIN RELIEF STRAP-OPTIONAL

More datasheets: 74F574SC | 74F574PC | 74F574SCX | CWR-130-40-0000 | CWR-130-24-0000 | CWR-130-14-0000 | CWR-130-16-0000 | CWR-134-14-0003 | CWR-130-14-0003 | CWR-130-16-0003

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CWR-134-14-0001 Datasheet file may be downloaded here without warranties.

Datasheet ID: CWR-134-14-0001 507605