EVM-IW-SMG2SMT-OB

EVM-IW-SMG2SMT-OB Datasheet

EVMB Evaluation Kit for Connect One’s

Part	Datasheet
EVM-IW-SMG2SMT-OB	EVM-IW-SMG2SMT-OB (pdf)

Related Parts	Information
EVM-IL-SM2144NH-I	EVM-IL-SM2144NH-I
EVM-IW-SMG2N2	EVM-IW-SMG2N2
EVM-IW-SMG2N1	EVM-IW-SMG2N1

PDF Datasheet Preview
User Guide EVMB Evaluation Kit for Connect One’s WiFi and LAN modules Connect One Ltd. 20 Atir Yeda Street, Kfar Saba 44643, Israel \| Phone +972-9-766-0456 \| Fax +972-9-766-0461 Email \| EVMB User Guide Information provided by Connect One Ltd. is believed to be accurate and reliable. However, Connect One Ltd. assumes no responsibility for its use, nor any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent rights of Connect One Ltd. other than for circuitry embodied in Connect One’s products. Connect One Ltd. reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of such a license agreement. It is forbidden by law to copy the software on any medium except as specifically allowed in the license agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem devices, scanning, and/or information storage and retrieval systems for any purpose without the express written consent of Connect One. WARNING THE Nano WiReach G2 N1 IS AN RF MODULE INTENDED FOR EMBEDDING IN A HOST DEVICE. LOCAL RELEVANT RF REGULATIONS SUCH AS ALLOWED FREQUENCIES AND USAGE IN COMMERCIAL FLIGHTS MUST BE OBSERVED. SAFETY INSTRUCTIONS MUST BE INCLUDED IN THE MANUALS OF THE HOST DEVICE. CONNECT ONE ASSUMES NO LIABILITY FOR CUSTOMER FAILURE TO COMPLY WITH THESE PRECAUTIONS. This section is pending for approvals from FCC and IC iChip, Nano WiReach, Nano WiReach SMT, Nano LANReach, Nano Socket iWiFi, Nano Socket LAN, IP Communication Controller, SerialNET, AT+i, Pico WiReach and Connect One are trademarks of Connect One Ltd. EVMB User Guide Table of Contents 1 The EVMB package includes the followings 2 The EVM-iW-SMG2N1 package includes the followings 3 The EVM-iW-SMG2N2 package includes the followings 4 The EVM-iW-SMG2SMT-OB package includes the followings 5 The EVM-iW-SM2144SMT-N-OB-C 6 The EVM-iL-SM2144N1-I package includes the followings 7 The EVM-iL-SM2144NH-I package includes the 8 The EVM-iW-SMG3SMTS package includes the Mounting the evaluation module daughterboard Connectors, switches and LED Host Connection 1 Using the Serial cable for 2 X DB9 connectors 2 Using the USB to Serial adaptor Installing the iChipConfig Utility and Evaluation Software Testing the module’s Wireless Testing the module’s Ethernet Connection Additional 1 SPI Slave Ordering Information and Instruction 1 Ordering 2 Order Information Appendix A EVMB Schematics Appendix B AT+I Configuration Examples Automatically connect to a specific Access EVMB User Guide Create an Access Point to allow connection from mobile devices LAN WiFi switch mode - merges Ethernet station s with WiFi client s into one logical subnet...21 EVMB User Guide Version Date Nov 1st 2014 Dec 15th 2014 Dec 14th 2016 Description Initial preliminary version Name changing and images Adding Pico WiReach EVM EVMB User Guide Introduction The Connect One’s EVMB is an evaluation platform designed to allow engineers and developers to evaluate Connect One’s WLAN and LAN modules. The EVMB has three female header connector, on which a daughter board with the evaluated module can be installed. Using the accessories packed with the EVMB and the configuration software, the user can easily connect to a host computer or any embedded platform and start applying commands, upload new firmware, changing mode of operation and reconfigure the module to any mode of operation the user requires for proper evaluation of the product. The EVMB evaluation platform can be used to evaluate the following modules Module name Nano WiReach G2 N1 Nano Socket iWiFi G2 N2 Nano WiReach SMT G2 -OB Nano WiReach MAX-C Nano LAN Reach Nano Socket LAN Pico WiReach Module part number iW-SMG2N1 iW-SMG2N2 iW-SMG2SMT-OB iW-SM2144SMT-N-OB-C iL-SM2144N1-I iL-SM2144NH-I iW-SMG3SMTS-OB Evaluation Daughter Board EVM-iW-SMG2N1 EVM-iW-SMG2N2 EVM-iW-SMG2SMT-OB EVM-iW-SM2144SMT-N-OB-C EVM-iL-SM2144N1-I EVM-iL-SM2144NH-I EVM-iW-SMG3SMTS-OB Unpacking 1 The EVMB package includes the followings: • EVMB Evaluation Board • Serial cable with two DB-9 connectors • USB to RS232 adaptor cable + installation CD • Power Cable USB to mini USB • Power Supply • Quick installation guide • RF Antenna • RF Cable EVMB User Guide 2 The EVM-iW-SMG2N1 package includes the followings: • EVM-iW-SMG2N1 - Evaluation module daughterboard with Nano WiReach G2 N1 module mounted EVM-iW-SMG2N1 3 The EVM-iW-SMG2N2 package includes the followings: • EVM-iW-SMG2N2 - Evaluation module daughterboard with Nano Socket iWiFi G2 N2 module mounted EVM-iW-SMG2N2 EVMB User Guide 4 The EVM-iW-SMG2SMT-OB package includes the followings: • EVM-iW-SMG2SMT-OB Evaluation module daughterboard with Nano WiReach SMT Onboard Antenna module mounted EVM-iW-SMG2SMT-OB 5 The EVM-iW-SM2144SMT-N-OB-C • EVM-iW-SM2144SMT-N-OB-C Evaluation module daughterboard with Nano WiReach MAX SMT Commercial version with on board antenna. 6 The EVM-iL-SM2144N1-I package includes the followings: • EVM-iL-SM2144N1-I Evaluation module daughterboard with Nano LAN Reach module mounted EVM-iL-SM2144N1-I EVMB User Guide 7 The EVM-iL-SM2144NH-I package includes the followings: • EVM-iL-SM2144NH-I Evaluation module daughterboard with Nano Socket LAN module mounted EVM-iL-SM2144NH-I 8 The EVM-iW-SMG3SMTS package includes the followings: Ordering Information and Instruction Ordering the EVMB is requires for evaluating the Connect One’s module. In addition to the EVMB, a daughter board equipped with the requested module should be ordered. While possessing the EVMB, customer can order different daughter boards in case a requirement for multiple modules evaluation is needed. 1 Ordering examples To evaluate the Nano WiReach SMT G2 product, the following parts needs to be ordered: 1 EVMB Evaluation Master Kit 2 EVM-iW-SMG2SMT-OB Evaluation Daughter Board for Nano WiReach SMT G2 To evaluate the Nano WiReach G2 product, the following parts needs to be ordered: 1 EVMB Evaluation Master Kit 2 EVM-iW-SMG2N1 Evaluation Daughter Board for Nano WiReach G2 2 Order Information Part Number EVMB EVM-iW-SMG2N1 EVM-iW-SMG2N2 EVM-iW-SMG2SMT-OB EVM-iW-SM2144SMT-N-OB-C EVM-iL-SM2144N1-I EVM-iL-SM2144NH-I Module part number Evaluation Master Kit with no module included Evaluation Daughter Board for iW-SMG2N1 Evaluation Daughter Board for iW-SMG2N2 Evaluation Daughter Board for iW-SMG2SMT-OB Evaluation Daughter Board for iW-SM2144SMT-N-OB-C Evaluation Daughter Board for iL-SM2144N1-I Evaluation Daughter Board for iL-SM2144NH-I EVMB User Guide Appendix A EVMB Schematics EVMB User Guide EVMB User Guide EVMB User Guide EVMB User Guide Appendix B AT+I Configuration Examples Automatically connect to a specific Access Point: AT+iFD restore to factory defaults AT+iHIF=1 set the serial interface to RS232 AT+iBDRF=9 fix baud rate to 115200 after power cycle AT+iRP20 list visible networks AT+iWLSI=My_WiFi AT+iWST0=4 WPA2 security AT+iWPP0=<WPA2 passphrase> AT+iAWS=1 enable website upon reboot AT+iDOWN reboot to apply settings Create an Access Point to allow connection from mobile devices: AT+iFD restore to factory defaults AT+iHIF=1 set the serial interface to RS232 AT+iBDRF=9 fix baud rate to 115200 after power cycle AT+iWLSI=My_AP AT+iDIP=10.0.0.1

PDF Datasheet Preview

User Guide

EVMB Evaluation Kit for Connect One’s

WiFi and LAN modules

Connect One Ltd. 20 Atir Yeda Street, Kfar Saba 44643, Israel | Phone +972-9-766-0456 | Fax +972-9-766-0461 Email |

EVMB User Guide

Information provided by Connect One Ltd. is believed to be accurate and reliable. However, Connect One Ltd. assumes no responsibility for its use, nor any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent rights of Connect One Ltd. other than for circuitry embodied in Connect One’s products. Connect One Ltd. reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of such a license agreement. It is forbidden by law to copy the software on any medium except as specifically allowed in the license agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem devices, scanning, and/or information storage and retrieval systems for any purpose without the express written consent of Connect One. WARNING THE Nano WiReach G2 N1 IS AN RF MODULE INTENDED FOR EMBEDDING IN A HOST DEVICE. LOCAL RELEVANT RF REGULATIONS SUCH AS ALLOWED FREQUENCIES AND USAGE IN COMMERCIAL FLIGHTS MUST BE OBSERVED. SAFETY INSTRUCTIONS MUST BE INCLUDED IN THE MANUALS OF THE HOST DEVICE. CONNECT ONE ASSUMES NO LIABILITY FOR CUSTOMER FAILURE TO COMPLY WITH THESE PRECAUTIONS.

This section is pending for approvals from FCC and IC
iChip, Nano WiReach, Nano WiReach SMT, Nano LANReach, Nano Socket iWiFi, Nano Socket LAN, IP Communication Controller, SerialNET, AT+i, Pico WiReach and Connect One are trademarks of Connect One Ltd.

EVMB User Guide

Table of Contents
1 The EVMB package includes the followings 2 The EVM-iW-SMG2N1 package includes the followings 3 The EVM-iW-SMG2N2 package includes the followings 4 The EVM-iW-SMG2SMT-OB package includes the followings 5 The EVM-iW-SM2144SMT-N-OB-C 6 The EVM-iL-SM2144N1-I package includes the followings 7 The EVM-iL-SM2144NH-I package includes the 8 The EVM-iW-SMG3SMTS package includes the Mounting the evaluation module daughterboard Connectors, switches and LED Host Connection 1 Using the Serial cable for 2 X DB9 connectors 2 Using the USB to Serial adaptor Installing the iChipConfig Utility and Evaluation Software Testing the module’s Wireless Testing the module’s Ethernet Connection Additional 1 SPI Slave Ordering Information and Instruction 1 Ordering 2 Order Information Appendix A EVMB Schematics Appendix B AT+I Configuration Examples

Automatically connect to a specific Access

EVMB User Guide

Create an Access Point to allow connection from mobile devices LAN WiFi switch mode - merges Ethernet station s with WiFi client s into one logical subnet...21

EVMB User Guide

Version

Date Nov 1st 2014 Dec 15th 2014 Dec 14th 2016

Description Initial preliminary version Name changing and images Adding Pico WiReach EVM

EVMB User Guide

Introduction

The Connect One’s EVMB is an evaluation platform designed to allow engineers and developers to evaluate Connect One’s WLAN and LAN modules.

The EVMB has three female header connector, on which a daughter board with the evaluated module can be installed.

Using the accessories packed with the EVMB and the configuration software, the user can easily connect to a host computer or any embedded platform and start applying commands, upload new firmware, changing mode of operation and reconfigure the module to any mode of operation the user requires for proper evaluation of the product.

The EVMB evaluation platform can be used to evaluate the following modules

Module name Nano WiReach G2 N1 Nano Socket iWiFi G2 N2 Nano WiReach SMT G2 -OB Nano WiReach MAX-C Nano LAN Reach Nano Socket LAN Pico WiReach

Module part number iW-SMG2N1 iW-SMG2N2 iW-SMG2SMT-OB iW-SM2144SMT-N-OB-C iL-SM2144N1-I iL-SM2144NH-I iW-SMG3SMTS-OB

Evaluation Daughter Board EVM-iW-SMG2N1 EVM-iW-SMG2N2 EVM-iW-SMG2SMT-OB EVM-iW-SM2144SMT-N-OB-C EVM-iL-SM2144N1-I EVM-iL-SM2144NH-I EVM-iW-SMG3SMTS-OB

Unpacking
1 The EVMB package includes the followings:
• EVMB Evaluation Board
• Serial cable with two DB-9 connectors
• USB to RS232 adaptor cable + installation CD
• Power Cable USB to mini USB
• Power Supply
• Quick installation guide
• RF Antenna
• RF Cable

EVMB User Guide
2 The EVM-iW-SMG2N1 package includes the followings:
• EVM-iW-SMG2N1 - Evaluation module daughterboard with Nano WiReach G2 N1 module mounted

EVM-iW-SMG2N1
3 The EVM-iW-SMG2N2 package includes the followings:
• EVM-iW-SMG2N2 - Evaluation module daughterboard with Nano Socket iWiFi G2 N2 module mounted

EVM-iW-SMG2N2

EVMB User Guide
4 The EVM-iW-SMG2SMT-OB package includes the followings:
• EVM-iW-SMG2SMT-OB Evaluation module daughterboard with Nano WiReach SMT Onboard Antenna module mounted

EVM-iW-SMG2SMT-OB
5 The EVM-iW-SM2144SMT-N-OB-C
• EVM-iW-SM2144SMT-N-OB-C Evaluation module daughterboard with Nano WiReach MAX SMT Commercial version with on board antenna.
6 The EVM-iL-SM2144N1-I package includes the followings:
• EVM-iL-SM2144N1-I Evaluation module daughterboard with Nano LAN Reach module mounted

EVM-iL-SM2144N1-I

EVMB User Guide
7 The EVM-iL-SM2144NH-I package includes the followings:
• EVM-iL-SM2144NH-I Evaluation module daughterboard with Nano Socket LAN module mounted

EVM-iL-SM2144NH-I
8 The EVM-iW-SMG3SMTS package includes the followings:
Ordering Information and Instruction
Ordering the EVMB is requires for evaluating the Connect One’s module. In addition to the EVMB, a daughter board equipped with the requested module should be ordered. While possessing the EVMB, customer can order different daughter boards in case a requirement for multiple modules evaluation is needed.
1 Ordering examples

To evaluate the Nano WiReach SMT G2 product, the following parts needs to be ordered:
1 EVMB Evaluation Master Kit 2 EVM-iW-SMG2SMT-OB Evaluation Daughter Board for Nano WiReach SMT G2

To evaluate the Nano WiReach G2 product, the following parts needs to be ordered:
1 EVMB Evaluation Master Kit 2 EVM-iW-SMG2N1 Evaluation Daughter Board for Nano WiReach G2
2 Order Information

Part Number EVMB EVM-iW-SMG2N1 EVM-iW-SMG2N2 EVM-iW-SMG2SMT-OB EVM-iW-SM2144SMT-N-OB-C EVM-iL-SM2144N1-I EVM-iL-SM2144NH-I

Module part number Evaluation Master Kit with no module included Evaluation Daughter Board for iW-SMG2N1 Evaluation Daughter Board for iW-SMG2N2 Evaluation Daughter Board for iW-SMG2SMT-OB Evaluation Daughter Board for iW-SM2144SMT-N-OB-C Evaluation Daughter Board for iL-SM2144N1-I Evaluation Daughter Board for iL-SM2144NH-I

EVMB User Guide

Appendix A EVMB Schematics

EVMB User Guide

EVMB User Guide

EVMB User Guide

EVMB User Guide

Appendix B AT+I Configuration Examples

Automatically connect to a specific Access Point:

AT+iFD
restore to factory defaults

AT+iHIF=1
set the serial interface to RS232

AT+iBDRF=9
fix baud rate to 115200 after power cycle

AT+iRP20
list visible networks

AT+iWLSI=My_WiFi

AT+iWST0=4

WPA2 security

AT+iWPP0=<WPA2 passphrase>

AT+iAWS=1
enable website upon reboot

AT+iDOWN
reboot to apply settings

Create an Access Point to allow connection from mobile devices:

AT+iFD
restore to factory defaults

AT+iHIF=1
set the serial interface to RS232

AT+iBDRF=9
fix baud rate to 115200 after power cycle

AT+iWLSI=My_AP

AT+iDIP=10.0.0.1

More datasheets: CY7C199C-12VC | CY7C199C-15PXC | GTB028EUB16 | W4024-760 | W4012-760 | ABX00012 | DFR0052 | 19039834A | DMN3031LSS-13 | EVM-IL-SM2144NH-I

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVM-IW-SMG2SMT-OB Datasheet file may be downloaded here without warranties.

Datasheet ID: EVM-IW-SMG2SMT-OB 506716