17-300460

17-300460 Datasheet

17-300440

Part	Datasheet
17-300460	17-300460 (pdf)

PDF Datasheet Preview
Fiber Optic Duplex LC Adaptor Assembly Supllied with dust caps Dust Caps n3.25 n3.25 n28.00 n28.00 Panel Flange Recommended Double-D Panel Cutout Bayonet Channel x 3 Recommanded Round Panel Cutout Receptacle Housing Bayonet Locking Type Die-Cast Version Material and Finish: - Receptacle Housing Die-Cast, Nickel Plated Duplex LC Adaptor Assembly: - Housing Mod. PPO , UL94 V-0, Color: SM Blue/MM Beige/APC SM Green - Alignment Sleeves SM Ceramic/MM Phosphor Bronze - Dust Cap PP, Color Neutral transparent - Operating Temperature -40~C to +85~C Connector can be front or rear mounted to a maximum panel thickness of 3.2mm. IP67 rated when covered or fully mated with the appropriate mating connector Single Mode SM 17-300440 Multi Mode MM 17-300450 APC Single Mode APC SM 17-300460 Directive 2002/95/EC RoHS Compliant THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION DOT NOT ALTER CAD DRAWING BY HAND b The panel gasket P/N 17-103540 and the M3 mounting hardware P/N 17-103530 must be ordered seperately, the recommended mounting torque is 12 to 14 lb-inch Customer Name Tolerance Unless otherwise specified 0 PLC Approval Date 1 PLC 2 PLC 3 PLC ANGLES 2011

PDF Datasheet Preview

Fiber Optic Duplex LC Adaptor Assembly Supllied with dust caps

Dust Caps
n3.25
n3.25
n28.00
n28.00

Panel Flange

Recommended Double-D Panel Cutout

Bayonet Channel x 3

Recommanded Round Panel Cutout

Receptacle Housing

Bayonet Locking Type

Die-Cast Version

Material and Finish:
- Receptacle Housing Die-Cast, Nickel Plated

Duplex LC Adaptor Assembly:
- Housing Mod. PPO , UL94 V-0, Color:

SM Blue/MM Beige/APC SM Green
- Alignment Sleeves SM Ceramic/MM Phosphor Bronze
- Dust Cap PP, Color Neutral transparent
- Operating Temperature -40~C to +85~C

Connector can be front or rear mounted to a maximum panel thickness of 3.2mm.

IP67 rated when covered or fully mated with the appropriate mating connector

Single Mode SM
17-300440

Multi Mode MM
17-300450

APC Single Mode APC SM
17-300460

Directive 2002/95/EC RoHS Compliant

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION

DOT NOT ALTER CAD DRAWING BY HAND
b The panel gasket P/N 17-103540 and the M3 mounting hardware P/N 17-103530 must be ordered seperately, the recommended mounting torque is 12 to 14 lb-inch

Customer Name

Tolerance

Unless otherwise specified
0 PLC

Approval Date
1 PLC 2 PLC 3 PLC

ANGLES
2011

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 17-300460 Datasheet file may be downloaded here without warranties.

Datasheet ID: 17-300460 506586