CS4362-KQZR

CS4362-KQZR Datasheet


CS4362

Part Datasheet
CS4362-KQZR CS4362-KQZR CS4362-KQZR (pdf)
Related Parts Information
CS4362-KQZ CS4362-KQZ CS4362-KQZ
CS4362-KQZR/E CS4362-KQZR/E CS4362-KQZR/E
CS4362-KQZ/E CS4362-KQZ/E CS4362-KQZ/E
PDF Datasheet Preview
CS4362
114 dB, 192 kHz 6-Channel D/A Converter
24-bit Conversion Up to 192 kHz Sample Rates 114 dB Dynamic Range -100 dB THD+N Supports PCM or DSD Data Formats Selectable Digital Filters Volume Control with Soft Ramp
1 dB Step Size Zero Crossing Click-free Transitions Dedicated DSD Inputs Low Clock Jitter Sensitivity Simultaneous Support for Two Synchronous Sample Rates for DVD Audio uC or Stand-Alone Operation

The CS4362 is a complete 6-channel digital-to-analog system including digital interpolation, fifth-order deltasigma digital-to-analog conversion, digital de-emphasis, volume control and analog filtering. The advantages of this architecture include ideal differential linearity, no distortion mechanisms due to resistor matching errors, no linearity drift over time and temperature and a high tolerance to clock jitter.
The CS4362 is available in a 48-pin LQFP package in Commercial grade -10°C to +70°C . The CDB4362 Customer Demonstration Board is also available for device evaluation and implementation suggestions. Please see “Ordering Information” on page 42 for complete details.

The CS4362 accepts PCM data at sample rates from 4 kHz to 192 kHz, DSD audio data, and operates over a wide power supply range. These features are ideal for multi-channel audio systems including DVD players. SACD players, A/V receivers, digital TV’s, mixing consoles, and effects processors.

M3/DSD_SCLK

VLS SCLK1 LRCK1 SCLK 2 L RCK2 SD I N1 SD I N2 SD I N3

M CLK
6 DSDxx

S e rial P o rt

M1/SCL/CCLK M2/SDA/CDIN M0/AD0/CS VLC

Control Port/Mode Select

Volum e C ontrol Mixer

Volum e C ontrol

I nt e r p o la t i o n F ilt e r I nt e r p o la t i o n F i lt e r

MUTEC[1:6]

E xte rnal M ute C ontrol

A n alo g Filte r

A n alo g Filte r

Volum e C ontrol Mixer

Volum e C ontrol

I nt e r p o la t i o n F i lt e r

A n alo g Filte r

I nt e r p o la t i o n F ilt e r

A n alo g Filte r

Volum e C ontrol Mixer

Volum e C ontrol

I nt e r p o la t i o n F i lt e r

A n alo g Filte r

I nt e r p o la t i o n F ilt e r

A n alo g Filte r

A O U T A1+ A O U T A1-

A O U T B1+ A O U T B1-

A O U T A2+ A O U T A2-

A O U T B2+ A O U T B2-

A O U T A3+ A O U T A3-

A O U T B3+ A O U T B3VQ

FILT+

Copyright Cirrus Logic, Inc. 2008 All Rights Reserved

FEB '08 DS257F2

CS4362

TABLE OF CONTENTS

CHARACTERISTICS AND SPECIFICATIONS 5 ANALOG 5 ANALOG 6 POWER AND THERMAL CHARACTERISTICS 6 ANALOG FILTER RESPONSE 7 DIGITAL 8 ABSOLUTE MAXIMUM RATINGS 8 RECOMMENDED OPERATING CONDITIONS 8 SWITCHING CHARACTERISTICS 9 DSD - SWITCHING CHARACTERISTICS 10 SWITCHING CHARACTERISTICS - CONTROL PORT - FORMAT 11 SWITCHING CHARACTERISTICS - CONTROL PORT - SPI 12

TYPICAL CONNECTION DIAGRAM 13 REGISTER QUICK REFERENCE 15 REGISTER DESCRIPTION 16
ORDERING INFORMATION 42

LIST OF FIGURES

Figure Serial Mode Input Timing 9 Figure Direct Stream Digital - Serial Audio Input 10 Figure Control Port Timing - 11 Figure Control Port Timing - SPI 12 Figure Typical Connection Diagram Control 13 Figure Typical Connection Diagram Stand-Alone 14 Figure Control Port Timing, 31 Figure Control Port Timing, SPI 31 Figure Single-Speed fast Stopband 33 Figure Single-Speed fast Transition Band 33 Figure Single-Speed fast Transition Band detail 33 Figure Single-Speed fast Passband Ripple 33 Figure Single-Speed slow Stopband Rejection 33 Figure Single-Speed slow Transition 33 Figure Single-Speed slow Transition Band 34 Figure Single-Speed slow Passband 34 Figure Double-Speed fast Stopband Rejection 34 Figure Double-Speed fast Transition 34 Figure Double-Speed fast Transition Band 34 Figure Double-Speed fast Passband 34 Figure Double-Speed slow Stopband Rejection 35 Figure Double-Speed slow Transition Band 35 Figure Double-Speed slow Transition Band detail 35 Figure Double-Speed slow Passband Ripple 35 Figure Quad-Speed fast Stopband Rejection 35 Figure Quad-Speed fast Transition Band 35

DS257F2

CS4362

Figure Quad-Speed fast Transition Band 36 Figure Quad-Speed fast Passband Ripple 36 Figure Quad-Speed slow Stopband 36 Figure Quad-Speed slow Transition 36 Figure Quad-Speed slow Transition Band 36 Figure Quad-Speed slow Passband 36 Figure Format 0 - Left Justified up to 24-bit 37 Figure Format 1 - up to 24-bit Data 37 Figure Format 2 - Right Justified 16-bit Data 37 Figure Format 3 - Right Justified 24-bit Data 37 Figure Format 4 - Right Justified 20-bit Data 38 Figure Format 5 - Right Justified 18-bit Data 38 Figure De-Emphasis 38 Figure Channel Pair Routing Diagram x = Channel Pair 1, 2, or 3 39 Figure ATAPI Block Diagram x = channel pair 1, 2, or 3 39 Figure Recommended Output 39

LIST OF TABLES

Table Digital Interface Formats - PCM 17 Table Digital Interface Formats - DSD Mode 18 Table ATAPI Decode 22 Table Example Digital Volume Settings 23 Table Common Clock 27 Table Digital Interface Format, Stand-Alone Mode 27 Table Mode Selection, Stand-Alone Mode Options 27 Table Direct Stream Digital DSD , Stand-Alone Mode Options 27

DS257F2

CHARACTERISTICS AND SPECIFICATIONS

CS4362

ANALOG CHARACTERISTICS

Full-Scale Output Sine Wave, 997 Hz Measurement Bandwidth 10 Hz to 20 kHz, unless otherwise specified Test
load RL = 3 kΩ, CL = 100 pF, VA = 5 V, VD = V see Figure 5

For Single-Speed Mode, Fs = 48 kHz, SCLK = MHz, MCLK = MHz For Double-Speed Mode, Fs = 96 kHz, SCLK = MHz, MCLK = MHz For Quad-Speed Mode, Fs = 192 kHz, SCLK = MHz, MCLK = MHz For Direct Stream Digital Mode, Fs = 128 x 48 kHz, DSD_SCLK = MHz, MCLK = MHz .

Parameters

Symbol Min

CS4362-KQZ Dynamic Performance - All PCM modes and DSD Note 1

Specified Temperature Range

Dynamic Range Note 2
24-bit unweighted

A-Weighted
16-bit unweighted

Note 3 A-Weighted

Total Harmonic Distortion + Noise

Note 2 THD+N
24-bit
-20 dB
-60 dB
16-bit

Note 3 -20 dB
-60 dB
-100 -91 -51 -94 -74 -34

Idle Channel Noise / Signal-to-noise ratio

Interchannel Isolation
1 kHz

Max Unit

Notes CS4362-KQZ parts are tested at 25°C. One-half LSB of triangular PDF dither is added to data. Performance limited by 16-bit quantization noise.

DS257F2

ANALOG CHARACTERISTICS

Continued
ORDERING INFORMATION

CS4362

Product Description Package

CS4362
114 dB, 192 kHz 6channel D/A Converter
48-pin LQFP

CDB4362

CS4362 Evaluation Board

Pb-Free Grade Temp Range

YES Commercial -10°C to +70°C

Container Tray

Tape and Reel -

Order # CS4362-KQZ CS4362-KQZR

CDB4362
14.REVISION HISTORY

Release F1 F2

Changes
Removed -BQ ordering option Corrected specifications for Full-Scale Differential Output Voltage Updated legal text Incorporated changes outlined in ER257B3 and ER257F1 Corrected pin order for analog outputs in the pin description Corrected mute pin decode in Section Updated description for Section Updated description for 3 in Section Added Section Updated Table 2 on page 18 Updated Section “Using DSD Mode” on page 29

Corrected DAC Pair Disable register description in Section Added note to Digital Interface Format in Section Added PCM mode format changeable in reset only to Section Updated Package Thermal Resistance in “Power and Thermal Characteristics” on page 6

Contacting Cirrus Logic Support

For all product questions and inquiries, contact a Cirrus Logic Sales Representative.

To find the one nearest you, go to

IMPORTANT NOTICE

Cirrus Logic, Inc. and its subsidiaries "Cirrus" believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind express or implied . Customers are advised to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives consent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE “CRITICAL APPLICATIONS” . CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PRODUCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER OR CUSTOMER’S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE, TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS’ FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.

Cirrus Logic, Cirrus, and the Cirrus Logic logo designs are trademarks of Cirrus Logic, Inc. All other brand and product names in this document may be trademarks or service marks of their respective owners.
is a registered trademark of Philips Semiconductor.

SPI is a trademark of Motorola, Inc.

DS257F2
More datasheets: L6219DSTR-T | L6219DS-T | L6219DSTR | L6219DS | M9240162 BK002 | M9240162 BK001 | M9240162 BK005 | SW5PFA-50 | FJY4007R | AW24P64F8BLK0M


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CS4362-KQZR Datasheet file may be downloaded here without warranties.

Datasheet ID: CS4362-KQZR 523182