20050

20050 Datasheet

TDS # 2000

Part	Datasheet
20050	20050 (pdf)

Related Parts	Information
20080	20080
21050	21050

PDF Datasheet Preview
COVENTRY Clean Room Products Division of ITW Chemtronics Wrapped Foam Swabs TDS # 2000 PRODUCT DESCRIPTION Coventry Wrapped Foam Swabs are constructed from reticulated 100 pores per inch medical grade foam which features the best open cell structure, providing excellent particle entrapment characteristics. The foam is thermally bonded to the swab handle without using adhesives. Excellent wicking pulls solvent away from surfaces Stronger head than other foam swabs Fiberless construction does not generate loose fibers or particles No adhesives or binders are used in the construction Excellent abrasion resistance for scrubbing rough surfaces 20050 cm Wood Tapered Handle , 0 3.2mm Foam Head, 500 swabs/ bag 21050 cm Nylon Tapered Handle, 0 mm Foam Head, 500 swabs/ bag 20080 cm Wood Tapered Handle , 0 mm Foam Head, 500 swabs/ bag 23110 " cm Wood, Foam Over Cotton, 0 mm Head, 500 swabs/ bag 23210 " cm Wood, Foam Over Cotton, 0 mm Head, 500 swabs/ bag Coventry Wrapped Foam Swabs an be used to Apply Adhesives or Lubricants into Tight Tolerance Areas Splice and Assembly of Fiber Optics Dispense or Remove Solvents Remove Contamination from Disk Drives Scrub Metal Oxides from Electrical Contacts COMPATIBILITY Foam Heads are compatible with most common solvents such as isopropyl alcohol and methanol. Compatible with limited exposure to ketones such as acetone or methyl ethyl ketone. Wood Handles are generally compatible with all solvents except with dilute or weak acids. Nylon Handles are generally compatible with all common solvents. MANUFACTURED BY: COVENTRY Clean Room Products Division of ITW Inc. 8125 Cobb Center Drive Kennesaw, GA 30152 USA 1-770-424-4888 AVAILABILITY TECHNICAL HOT LINE 1-800-TECH-401 Wrapped Foam Swab Test Data Head Material Swab Head Diameter Handle Length Particle Counts: - 1 um - 2 um - 5 um - 10 um 10 - 25 um over 25 um TOTAL NVR ug/swab Chlorides ug/swab RoHS/WEEE Status Wrapped Urethane Foam 21050 mm cm 755 97 20 7 13 3 895 none detected The swabs were tested by Particle Measurement Technology. All the swabs tests were done using the recommended practices of the Institute of Environmental Science, Swabs and Wipes Working Group. TECHNICAL AND APPLICATION ASSISTANCE

PDF Datasheet Preview

COVENTRY Clean Room Products

Division of ITW Chemtronics

Wrapped Foam Swabs

TDS # 2000

PRODUCT DESCRIPTION

Coventry Wrapped Foam Swabs are constructed from reticulated 100 pores per inch medical grade foam which features the best open cell structure, providing excellent particle entrapment characteristics. The foam is thermally bonded to the swab handle without using adhesives.

Excellent wicking pulls solvent away from surfaces Stronger head than other foam swabs Fiberless construction does not generate loose fibers or particles No adhesives or binders are used in the construction Excellent abrasion resistance for scrubbing rough surfaces
20050 cm Wood Tapered Handle ,
0 3.2mm Foam Head, 500 swabs/ bag
21050 cm Nylon Tapered Handle,
0 mm Foam Head, 500 swabs/ bag
20080 cm Wood Tapered Handle ,
0 mm Foam Head, 500 swabs/ bag
23110 " cm Wood, Foam Over Cotton,
0 mm Head, 500 swabs/ bag
23210 " cm Wood, Foam Over Cotton,
0 mm Head, 500 swabs/ bag

Coventry Wrapped Foam Swabs an be used to Apply Adhesives or Lubricants into Tight Tolerance Areas Splice and Assembly of Fiber Optics Dispense or Remove Solvents Remove Contamination from Disk Drives Scrub Metal Oxides from Electrical Contacts

COMPATIBILITY

Foam Heads are compatible with most common solvents such as isopropyl alcohol and methanol. Compatible with limited exposure to ketones such as acetone or methyl ethyl ketone. Wood Handles are generally compatible with all solvents except with dilute or weak acids. Nylon Handles are generally compatible with all
common solvents.

MANUFACTURED BY:

COVENTRY Clean Room Products

Division of ITW Inc.
8125 Cobb Center Drive

Kennesaw, GA 30152 USA
1-770-424-4888

AVAILABILITY

TECHNICAL HOT LINE 1-800-TECH-401

Wrapped Foam Swab Test Data

Head Material

Swab Head Diameter Handle Length Particle Counts:
- 1 um - 2 um - 5 um - 10 um 10 - 25 um over 25 um TOTAL NVR ug/swab Chlorides ug/swab

RoHS/WEEE

Status

Wrapped Urethane Foam
21050 mm cm
755 97 20 7 13 3 895
none detected

The swabs were tested by Particle Measurement Technology. All the swabs tests were done using the recommended practices of the Institute of Environmental Science, Swabs and Wipes Working Group.

TECHNICAL AND APPLICATION ASSISTANCE

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 20050 Datasheet file may be downloaded here without warranties.

Datasheet ID: 20050 522410