TP11SH9AKE

TP11SH9AKE Datasheet

ELECTRICAL LIFE TP11, TP21 MODELS 60,000 make-and-break cycles at full load. TP12 MODELS 30,000 cycles.

Part	Datasheet
TP11SH9AKE	TP11SH9AKE (pdf)

PDF Datasheet Preview
Pushbutton C&K TP Series Tiny Pushbutton Switches Features/Benefits • Subminiature of Typical Applications • Telecommunications and switching 1 AMP networking equipment • Vertical & right angle terminations • Computers and peripherals • PC & panel mount models • Instrumentation and controls • Snap-in front panel mounting available • Epoxy terminal seal-compatible with bottom wash cleaning • RoHS compliant models available Models Available Specifications Materials CONTACT RATING B contact material VA max. 20 V AC or DC max. Q contact material 1 AMP 120 V AC or 28 V DC. See page A-17 for additional ratings. ELECTRICAL LIFE TP11, TP21 MODELS 60,000 make-and-break cycles at full load. TP12 MODELS 30,000 cycles. CONTACT RESISTANCE Below 20 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE min. DIELECTRIC STRENGTH 1000 Vrms min. sea level. OPERATING TEMPERATURE to 85ºC. SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . NOTE Any models supplied with Q, B, P, R or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. CASE Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate DAP , UL 94V-0 . PLUNGER Thermoplastic polyester UL 94V-0 . CAP & FRAME Nylon, black standard. BUSHING Brass, nickel plated. HOUSING Stainless steel. SWITCH SUPPORT Brass, matte-tin plated. END CONTACTS B contact material Copper alloy, with gold plate over nickel plate. Q contact material Coin silver, silver plated. See page A-21 for additional contact materials. CENTER CONTACT & ALL TERMINALS B contact material Copper alloy, with gold plate over nickel plate. Q contact material Copper alloy, silver plated. See page A-17 for additional contact materials. TERMINAL SEAL Epoxy. Refer to soldering and cleaning in Technical Data Chapter HARDWARE Nut & Locking Ring Brass nickel plated. Lockwasher Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-13 thru A-18. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function TP11 SPST Off-Mom. TP12 SPDT On-Mom. TP21 DPST Off-Mom. Actuator or Bushing SH high plunger, threaded, high bushing, flat SH8 high plunger, unthreaded, high bushing, round SH9 high plunger, unthreaded,

PDF Datasheet Preview

Pushbutton

C&K TP Series Tiny Pushbutton Switches

Features/Benefits
• Subminiature of

Typical Applications
• Telecommunications and
switching 1 AMP
networking equipment
• Vertical & right angle terminations
• Computers and peripherals
• PC & panel mount models
• Instrumentation and controls
• Snap-in front panel mounting available
• Epoxy terminal seal-compatible with bottom wash cleaning
• RoHS compliant models available

Models Available

Specifications

Materials

CONTACT RATING B contact material VA max. 20 V AC or DC max. Q contact material 1 AMP 120 V AC or 28 V DC. See page A-17 for additional ratings.

ELECTRICAL LIFE TP11, TP21 MODELS 60,000 make-and-break cycles at full load. TP12 MODELS 30,000 cycles.

CONTACT RESISTANCE Below 20 typ. initial 2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE min. DIELECTRIC STRENGTH 1000 Vrms min. sea level.

OPERATING TEMPERATURE to 85ºC.

SOLDERABILITY Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 1 hour steam aging .

NOTE Any models supplied with Q, B, P, R or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to:

NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

CASE Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate DAP , UL 94V-0 .

PLUNGER Thermoplastic polyester UL 94V-0 .

CAP & FRAME Nylon, black standard.

BUSHING Brass, nickel plated.

HOUSING Stainless steel.

SWITCH SUPPORT Brass, matte-tin plated.

END CONTACTS B contact material Copper alloy, with gold plate over nickel plate. Q contact material Coin silver, silver plated. See page A-21 for additional contact materials.

CENTER CONTACT & ALL TERMINALS B contact material Copper alloy, with gold plate over nickel plate. Q contact material Copper alloy, silver plated. See page A-17 for additional contact materials.

TERMINAL SEAL Epoxy. Refer to soldering and cleaning in Technical Data Chapter

HARDWARE Nut & Locking Ring Brass nickel plated. Lockwasher Steel, nickel plated.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-13 thru A-18. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function TP11 SPST Off-Mom. TP12 SPDT On-Mom. TP21 DPST Off-Mom.

Actuator or Bushing SH high plunger, threaded,
high bushing, flat SH8 high plunger, unthreaded,
high bushing, round SH9 high plunger, unthreaded,

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TP11SH9AKE Datasheet file may be downloaded here without warranties.

Datasheet ID: TP11SH9AKE 522667