HFBR-0310

HFBR-0310 Datasheet

HFBR-1312T Transmitter HFBR-2316T Receiver 1300 nm Fiber Optic Transmitter and Receiver

Part	Datasheet
HFBR-0310	HFBR-0310 (pdf)

PDF Datasheet Preview
HFBR-1312T Transmitter HFBR-2316T Receiver 1300 nm Fiber Optic Transmitter and Receiver Data Sheet The HFBR-0300 Series is designed to provide the most cost-effective 1300 nm fiber optic links for a wide variety of data communication applications from low-speed distance extenders up to SONET OC-3 signal rates. Pinouts identical to Avago HFBR-0400 Series allow designers to easily upgrade their 820 nm links for farther distance. The transmitter and receiver are compatible with two popular optical fiber sizes 50/125 and diameter. This allows flexibility in choosing a fiber size. The 1300 nm wavelength is in the lower dispersion and attenuation region of fiber, and provides longer distance capabilities than 820 nm LED technology. Typical distance capabilities are 2 km at 125 MBd and 5 km at 32 MBd. Transmitter The HFBR-1312T fiber optic transmitter contains a 1300 nm InGaAsP light emitting diode capable of efficiently launching optical power into 50/125 um and diameter fiber. Converting the interface circuit from a HFBR-14XX 820 nm transmitter to the HFBR-1312T requires only the removal of a few passive components. • Low cost fiber optic link • Signal rates over 155 megabaud • 1300 nm wavelength • Link distances over 5 km • Dual-in-line package panel-mountable ST* and SC con- nector receptacles • Auto-insertable and wave-solderable • Specified with and 50/125 fiber • Compatible with HFBR-0400Z Series • Receiver also specified for SM cable spec 9/125 • Desktop links for high speed LANs • Distance extension links • Telecom switch systems • TAXlchip compatible Receiver The HFBR-2316T receiver contains an InGaAs PIN photodiode and a low-noise transimpedance preamplifier that operate in the 1300 nm wavelength region. The HFBR2316T receives an optical signal and converts it to an analog voltage. The buffered output is an emitter-follower, with frequency response from DC to typically 125 MHz. Low-cost external components can be used to convert the analog output to logic compatible signal levels for a variety of data formats and data rates. The HFBR-2316T is pin compatible with HFBR-24X6 receivers and can be used to extend the distance of an existing application by substituting the HFBR-2316T for the HFBR-2416. ST is a registered trademark of AT&T Lightguide Cable Connectors HFBR-1312T Transmitter 2, 6 ANODE 3 CATHODE BOTTOM VIEW PIN NO. 1 INDICATOR PIN FUNCTION 1† N.C. 2 ANODE 3 CATHODE 4† N.C. 5† N.C. 6 ANODE 7 N.C. 8† N.C. * PIN 7 IS ELECTRICALLY ISOLATED FROM PINS 1, 4, 5, AND 8, BUT IS CONNECTED TO THE HEADER. † PINS 1, 4, 5, AND 8 ARE ISOLATED FROM THE INTERNAL CIRCUITRY, BUT ARE ELECTRICALLY CONNECTED TO EACH OTHER. HFBR-2316T Receiver 45 36 27 18 PIN NO. 1 INDICATOR ANALOG SIGNAL 3, 7 VEE PIN FUNCTION 1† N.C. 2 SIGNAL 3* VEE 4† N.C. 5† N.C. 6 VCC 7* VEE 8† N.C. * PINS 3 AND 7 ARE ELECTRICALLY CONNECTED TO THE HEADER. † PINS 1, 4, 5, AND 8 ARE ISOLATED FROM THE INTERNAL CIRCUITRY, BUT ARE ELECTRICALLY CONNECTED TO EACH OTHER. HFBR-0300 Series Mechanical Dimensions PART NUMBER DATE CODE YYWW HFBR-X31XTZ Package Information DIA. HFBR-0300 Series transmitters and receivers are housed is a dual-in-line package made of high strength, heat resistant, chemically resistant, and UL V-0 flame retardant plastic. Transmitters are identified by the brown port color receivers have black ports. The package is autoinsertable and wave solderable for high volume production applications. Note The “T” in the product numbers indicates a Threaded ST connector panel mountable , for both transmitter and receiver. Handling and Design Information When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air is often sufficient to remove particles of dirt methanol on a cotton swab also works well. 3/8-32 UNEF-2A PINS 1,4,5,8 X PINS 2,3,6,7 DIA 1 23 4 8 76 5

PDF Datasheet Preview

HFBR-1312T Transmitter HFBR-2316T Receiver 1300 nm Fiber Optic Transmitter and Receiver

Data Sheet

The HFBR-0300 Series is designed to provide the most cost-effective 1300 nm fiber optic links for a wide variety of data communication applications from low-speed distance extenders up to SONET OC-3 signal rates. Pinouts identical to Avago HFBR-0400 Series allow designers to easily upgrade their 820 nm links for farther distance. The transmitter and receiver are compatible with two popular optical fiber sizes 50/125 and diameter. This allows flexibility in choosing a fiber size. The 1300 nm wavelength is in the lower dispersion and attenuation region of fiber, and provides longer distance capabilities than 820 nm LED technology. Typical distance capabilities are 2 km at 125 MBd and 5 km at 32 MBd.

Transmitter

The HFBR-1312T fiber optic transmitter contains a 1300 nm InGaAsP light emitting diode capable of efficiently launching optical power into 50/125 um and diameter fiber. Converting the interface circuit from a HFBR-14XX 820 nm transmitter to the HFBR-1312T requires only the removal of a few passive components.
• Low cost fiber optic link
• Signal rates over 155 megabaud
• 1300 nm wavelength
• Link distances over 5 km
• Dual-in-line package panel-mountable ST* and SC con-
nector receptacles
• Auto-insertable and wave-solderable
• Specified with and 50/125 fiber
• Compatible with HFBR-0400Z Series
• Receiver also specified for SM cable spec 9/125
• Desktop links for high speed LANs
• Distance extension links
• Telecom switch systems
• TAXlchip compatible

Receiver

The HFBR-2316T receiver contains an InGaAs PIN photodiode and a low-noise transimpedance preamplifier that operate in the 1300 nm wavelength region. The HFBR2316T receives an optical signal and converts it to an analog voltage. The buffered output is an emitter-follower, with frequency response from DC to typically 125 MHz. Low-cost external components can be used to convert the analog output to logic compatible signal levels for a variety of data formats and data rates. The HFBR-2316T is pin compatible with HFBR-24X6 receivers and can be used to extend the distance of an existing application by substituting the HFBR-2316T for the HFBR-2416.
*ST is a registered trademark of AT&T Lightguide Cable Connectors

HFBR-1312T Transmitter
2, 6 ANODE
3 CATHODE

BOTTOM VIEW

PIN NO. 1 INDICATOR

PIN FUNCTION 1† N.C. 2 ANODE 3 CATHODE 4† N.C. 5† N.C. 6 ANODE 7* N.C. 8† N.C.
* PIN 7 IS ELECTRICALLY ISOLATED FROM PINS 1, 4, 5, AND 8, BUT IS CONNECTED TO THE HEADER.
† PINS 1, 4, 5, AND 8 ARE ISOLATED FROM THE INTERNAL CIRCUITRY, BUT ARE ELECTRICALLY CONNECTED TO EACH OTHER.

HFBR-2316T Receiver
45 36 27 18

PIN NO. 1 INDICATOR

ANALOG

SIGNAL
3, 7 VEE

PIN FUNCTION 1† N.C. 2 SIGNAL 3* VEE 4† N.C. 5† N.C. 6 VCC 7* VEE 8† N.C.
* PINS 3 AND 7 ARE ELECTRICALLY CONNECTED TO THE HEADER.
† PINS 1, 4, 5, AND 8 ARE ISOLATED FROM THE INTERNAL CIRCUITRY, BUT ARE ELECTRICALLY CONNECTED TO EACH OTHER.

HFBR-0300 Series Mechanical Dimensions

PART NUMBER DATE CODE

YYWW HFBR-X31XTZ

Package Information

DIA.

HFBR-0300 Series transmitters and receivers are housed is a dual-in-line package made of high strength, heat resistant, chemically resistant, and UL V-0 flame retardant plastic. Transmitters are identified by the brown port color receivers have black ports. The package is autoinsertable and wave solderable for high volume production applications.

Note The “T” in the product numbers indicates a Threaded ST connector panel mountable , for both transmitter and receiver.

Handling and Design Information

When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air is often sufficient to remove particles of dirt methanol on a cotton swab also works well.
3/8-32 UNEF-2A

PINS 1,4,5,8 X

PINS 2,3,6,7 DIA
1 23 4 8 76 5

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFBR-0310 Datasheet file may be downloaded here without warranties.

Datasheet ID: HFBR-0310 520300