BTNKT110290

BTNKT110290 Datasheet

BTN

Part	Datasheet
BTNKT110290	BTNKT110290 (pdf)

PDF Datasheet Preview
KT Series Full SMT Top & Side Actuated Sealed Tact Switch Features/Benefits • Full SMT side-actuated tact switch • Telecommunications • SMT top-actuated tact switch with G or J terminations • Computer products • High shear force with extended bracket • Instrumentation • Easy to pick & place with top plate tab • Power supply • Rubber or hard plastic actuator • Press fit or snap fit caps • RoHS compliant and compatible Tactile Switches Specification CONTACT ARRANGEMENT SPST, N.O. TERMINALS SMT termination Electrical CONTACT RATING VA max. 32 V AC or DC max. ELECTRICAL & MECHANICAL LIFE 100,000 make-and-break cycles at full load. DIELECTRIC STRENGTH 250 Vrms min. sea level. CONTACT RESISTANCE Below 50 typ. initial 2-4 V DC, 100 mA. INSULATION RESISTANCE 109 min. Environmental OPERATING TEMPERATURES Ag version to Au version to Process SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . DEGREE OF PROTECTION IP57 protection against harmful dust deposits, full-scale voltage protection. Packaging Switches supplied in anti-static tape and reels per EIA Tape and cover strip are conductive for use near statically sensitive components. NOTE Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. SWITCH KT11 Actuator B0* Soft, flush B1* Soft, 0,64 mm B2* Soft, 2,24 mm P2 Hard, 2,36 mm P3 Hard, 1,12 mm P4 Hard, 3,96 mm S1* for Press Fit Caps S2* for Snap Fit Caps with anti-rotation Orientation and Mounting Style SM Top Gullwing JM Top J Bend ** SAM SA1M SA2M SA3M Right angle Right angle with front solder pad Right angle with front solder pad and pick & place tab Right angle with pick & place tab Contact Plating 4 Silver 5 Gold Contact Plating LFS RoHS compliant and compatible. Silver plated LFG RoHS compliant and

PDF Datasheet Preview

KT Series Full SMT Top & Side Actuated Sealed Tact Switch

Features/Benefits
• Full SMT side-actuated tact switch
• Telecommunications
• SMT top-actuated tact switch with G or J terminations
• Computer products
• High shear force with extended bracket
• Instrumentation
• Easy to pick & place with top plate tab
• Power supply
• Rubber or hard plastic actuator
• Press fit or snap fit caps
• RoHS compliant and compatible

Tactile Switches

Specification

CONTACT ARRANGEMENT SPST, N.O. TERMINALS SMT termination

Electrical

CONTACT RATING VA max. 32 V AC or DC max. ELECTRICAL & MECHANICAL LIFE 100,000 make-and-break cycles at full load. DIELECTRIC STRENGTH 250 Vrms min. sea level. CONTACT RESISTANCE Below 50 typ. initial
2-4 V DC, 100 mA. INSULATION RESISTANCE 109 min.

Environmental

OPERATING TEMPERATURES Ag version to Au version to

Process

SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging . DEGREE OF PROTECTION IP57 protection against harmful dust deposits, full-scale voltage protection.

Packaging

Switches supplied in anti-static tape and reels per EIA Tape and cover strip are conductive for use near statically sensitive components.

NOTE Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

How To Order

Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.

However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative.

SWITCH

KT11

Actuator B0* Soft, flush B1* Soft, 0,64 mm B2* Soft, 2,24 mm P2** Hard, 2,36 mm P3** Hard, 1,12 mm P4** Hard, 3,96 mm S1*** for Press Fit Caps S2*** for Snap Fit Caps with anti-rotation

Orientation and Mounting Style

SM Top Gullwing

JM Top J Bend ****

SAM SA1M SA2M SA3M

Right angle Right angle with front solder pad Right angle with front solder pad and pick & place tab Right angle with pick & place tab

Contact Plating
4 Silver 5 Gold

Contact Plating LFS RoHS compliant and
compatible. Silver plated

LFG RoHS compliant and

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTNKT110290 Datasheet file may be downloaded here without warranties.

Datasheet ID: BTNKT110290 522547