10150-3000VC

10150-3000VC Datasheet

101 Series

Part	Datasheet
10150-3000VC	10150-3000VC (pdf)

Related Parts	Information
10136-3000VC	10136-3000VC

PDF Datasheet Preview
3M Mini D Ribbon MDR Connectors Solder Plug Connector - Shielded 101 Series • Wiper-on-wiper contact for reliable repetitive plugging • Solder cup termination requires no special tooling • Accepts a wide variety of discrete wire 24 to 30 AWG cable construction • Contacts 14, 20, 26, 36, 40 and 50 • RoHS* compliant version available Date Modified May 25, 2005 TS-0669-09 Sheet 1 of 2 Physical Insulation Material Glass Reinforced Polyester PCT Flamability UL 94V-0 Color Black Contact Material Copper Alloy C521 Plating Underplating 80 µm Nickel Wiping Area Gold see ordering information Solder Area Gold RoHS compliant or Tin-Lead see ordering information Shroud Material Steel Plating Nickel Wire Accomodation 24, 26, 28 & 30 AWG Marking 3M Logo and Part Number Electrical Current Rating 1 A Insulation Resistance > 1 x at 500 VDC Withstanding Voltage 500 Vrms for 1 minute Environmental Temperature Rating -55°C TO +105°C Solder Process 360°C max for 10 sec. max * RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No. E68080 3M Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M Mini D Ribbon MDR Connectors Solder Plug Connector - Shielded Contact Quantity 14 20 26 36 40 50 Dimensions [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] C [ ] [ ] [ ] [ ] [ ] [ ] 20, 36 & 40 Position 14, 26 & 50 Position 101 Series Position Position 1 Position 2 Position 3 Last Position Last Position Position 1 Position 2 Position 3 Position [ ] A B Last Position Inch [m ] Tolerance Unless Noted inch [ ] D im ensions for R eference O nly Ordering Information 101XX-3000-XX Contact Quantity See Table P = Gold flash solder cup RoHS compliant V = Tin-lead solder cup C = 30µ" µm] min gold wiping interface E = 20µ" µm] min gold wiping interface Note This solder plug connector must be used with only 3M Non-Shielded Shell Kits 103XX-52FO-008 Series and 103XX-52A0-008 Series. TS-0669-09 Sheet 2 of 2 3M Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Minimum 10% Post-Consumer Fiber Printed in USA. 3M 2005

PDF Datasheet Preview

3M Mini D Ribbon MDR Connectors

Solder Plug Connector - Shielded
101 Series
• Wiper-on-wiper contact for reliable repetitive plugging
• Solder cup termination requires no special tooling
• Accepts a wide variety of discrete wire 24 to 30 AWG cable construction
• Contacts 14, 20, 26, 36, 40 and 50
• RoHS* compliant version available

Date Modified May 25, 2005

TS-0669-09 Sheet 1 of 2

Physical

Insulation Material Glass Reinforced Polyester PCT Flamability UL 94V-0 Color Black

Contact Material Copper Alloy C521 Plating
Underplating 80 µm Nickel Wiping Area Gold see ordering information Solder Area Gold RoHS compliant or Tin-Lead see ordering information Shroud Material Steel

Plating Nickel Wire Accomodation 24, 26, 28 & 30 AWG

Marking 3M Logo and Part Number

Electrical

Current Rating 1 A Insulation Resistance > 1 x at 500 VDC Withstanding Voltage 500 Vrms for 1 minute

Environmental

Temperature Rating -55°C TO +105°C Solder Process 360°C max for 10 sec. max
* RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.

UL File No. E68080
3M Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373
3M Mini D Ribbon MDR Connectors

Solder Plug Connector - Shielded

Contact Quantity
14 20 26 36 40 50

Dimensions
[ ] [ ]
[ ] [ ]
[ ] [ ]
[ ] [ ]
[ ] [ ]
[ ] [ ]

C [ ] [ ] [ ] [ ] [ ] [ ]
20, 36 & 40 Position
14, 26 & 50 Position
101 Series

Position

Position 1 Position 2

Position 3

Last Position

Last Position

Position 1

Position 2 Position 3

Position
[ ] A B

Last Position

Inch [m ]

Tolerance Unless Noted
inch [ ] D im ensions for R eference

O nly
Ordering Information
101XX-3000-XX

Contact Quantity See Table P = Gold flash solder cup RoHS compliant V = Tin-lead solder cup

C = 30µ" µm] min gold wiping interface E = 20µ" µm] min gold wiping interface

Note This solder plug connector must be used with only 3M Non-Shielded Shell Kits 103XX-52FO-008 Series and 103XX-52A0-008 Series.

TS-0669-09 Sheet 2 of 2
3M Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Electronics
6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Minimum 10% Post-Consumer Fiber

Printed in USA. 3M 2005

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 10150-3000VC Datasheet file may be downloaded here without warranties.

Datasheet ID: 10150-3000VC 516968