MSA-0520

MSA-0520 Datasheet

MSA-0520 Cascadable Silicon Bipolar MMIC Amplifier

Part	Datasheet
MSA-0520	MSA-0520 (pdf)

PDF Datasheet Preview
MSA-0520 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet The MSA-0520 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a hermetic, BeO disk package for good thermal characteristics. This MMIC is designed for use as a general purpose 50Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in industrial and military applications. The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, and reliability. The use of an external bias resistor for temperature and current stability also bias flexibility. • Cascadable 50 Ω Gain Block • High Output Power +23 dBm Typical P1 dB at GHz • Low Distortion 33 dBm Typical IP3 at GHz • dB Typical Gain at GHz • Hermetic Metal/Beryllia Microstrip Package 200 mil BeO Package Typical Biasing Configuration R bias VCC > 15 V C block IN 3 1 MSA RFC Optional C block Vd = 12 V MSA-0520 Absolute Maximum Ratings Parameter Absolute Maximum[1] Device Current 225 mA Power Dissipation[2,3] RF Input Power +25 dBm Junction Temperature 200°C Storage Temperature to 200°C Permanent damage may occur if any of these limits are exceeded. TCASE = 25°C. Derate at 40 mW/°C for TC > 125°C. The small spot size of this technique results in a higher, though more accurate determination of than do alternate methods. Thermal Resistance[2,4] = 25°C/W Electrical Specifications[1], TA = 25°C P1 dB GP f3 dB VSWR IP3 NF50 Ω tD Vd dV/dT Parameters and Test Conditions Id = 165 mA, ZO = 50 Ω Units Min. Typ. Max. Output Power at 1 dB Gain Compression f = GHz Power Gain \|S21\| 2 f = GHz Ordering Information Part Numbers MSA-0520 No. of Devices 100 Comments Bulk 200 mil BeO Package Dimensions GROUND 45° RF INPUT NO REFERENCE GROUND RF OUTPUT AND BIAS unless otherwise specified Dimensions are in Tolerances in .xxx = ± mm .xx = ± Base of package is electrically isolated. ± ± For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright 2008 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-2755EN AV02-1228EN May 14, 2008

PDF Datasheet Preview

MSA-0520 Cascadable Silicon Bipolar MMIC Amplifier

Data Sheet

The MSA-0520 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a hermetic, BeO disk package for good thermal characteristics. This MMIC is designed for use as a general purpose 50Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in industrial and military applications.

The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, and reliability. The use of an external bias resistor for temperature and current stability also bias flexibility.
• Cascadable 50 Ω Gain Block
• High Output Power +23 dBm Typical P1 dB at GHz
• Low Distortion 33 dBm Typical IP3 at GHz
• dB Typical Gain at GHz
• Hermetic Metal/Beryllia Microstrip Package
200 mil BeO Package

Typical Biasing Configuration

R bias

VCC > 15 V

C block IN
3 1 MSA

RFC Optional

C block Vd = 12 V

MSA-0520 Absolute Maximum Ratings

Parameter

Absolute Maximum[1]

Device Current 225 mA

Power Dissipation[2,3]

RF Input Power
+25 dBm

Junction Temperature 200°C

Storage Temperature
to 200°C

Permanent damage may occur if any of these limits are exceeded.

TCASE = 25°C. Derate at 40 mW/°C for TC > 125°C. The small spot size of this technique results in a higher, though more accurate determination
of than do alternate methods.

Thermal Resistance[2,4] = 25°C/W

Electrical Specifications[1], TA = 25°C

P1 dB GP f3 dB

VSWR

IP3 NF50 Ω tD Vd dV/dT

Parameters and Test Conditions Id = 165 mA, ZO = 50 Ω

Units Min. Typ. Max.

Output Power at 1 dB Gain Compression
f = GHz

Power Gain |S21| 2
f = GHz
Ordering Information

Part Numbers MSA-0520

No. of Devices 100

Comments Bulk
200 mil BeO Package Dimensions

GROUND
45°

RF INPUT

NO REFERENCE

GROUND

RF OUTPUT AND BIAS
unless otherwise specified

Dimensions are in

Tolerances
in .xxx = ±
mm .xx = ±

Base of package is
electrically isolated.
± ±

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright 2008 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-2755EN AV02-1228EN May 14, 2008

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MSA-0520 Datasheet file may be downloaded here without warranties.

Datasheet ID: MSA-0520 520468