PS4066AEEE

PS4066AEEE Datasheet

PS4066/PS4066A

Part	Datasheet
PS4066AEEE	PS4066AEEE (pdf)

Related Parts	Information
PS4066ACSDEX	PS4066ACSDEX
PS4066ACSDE	PS4066ACSDE
PS4066ACSD	PS4066ACSD
PS4066AESD	PS4066AESD

PDF Datasheet Preview
PS4066/PS4066A Low-Cost, Quad, SPST, CMOS Analog Switches • Low On-Resistance • On-Resistance Matching Between Channels, typ • On-Resistance Flatness, <2Ω typ • Low Off-Channel Leakage, <100pA +25oC • TTL/CMOS Logic Compatible • GND-to-V+ Analog Signal Dynamic Range • Low Power Consumption <12uW • Low Crosstalk -86dB 1MHz • Low Off-Isolation -58dB 1 MHz • Wide Bandwidth > 100 MHz • Small QSOP-16 Package Saves Board Area • Instrumentation, ATE • Sample-and-Holds • Audio Switching and Routing • Telecommunication Systems • PBX, PABX • Battery-Powered Systems The PS4066/PS4066A are improved SPST CMOS analog switches ideal for low-distortion audio switching. These high precision, medium voltage switches were designed to operate with single-supplies from +3V to 16V. They are fully specified with +12V, +5V, and +3V supplies. The PS4066/PS4066A has four normally open NO switches. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rails. With +12V power supply, the PS4066/PS4066A guarantee <45Ω on-resistance. On-resistance matching between channels is within 2Ω PS4066 . On-resistance flatness is less than 4Ω PS4066A over the specified range. The PS4066A guarantees low leakage currents <100pA 25oC, <6nA +85oC and fast switching speeds tON < 175ns . ESD sensitivity rating is >2,000V per MIL-STD 883, Method Both devices are available in PDIP-14, narrow-body SOIC-14, and QSOP-16 packages. Available temperature ranges are commercial 0oC to 70oC , and industrial -40oC to +85oC . For operation below 5V, the PI5A101/PI5A391/PI5A392 are also recommended. Functional Diagrams, Pin Configurations, and Truth Table Logic Switch 0 OFF 1 ON Top View PDIP/SO N.C. = No Internal Connection Switches shown for logic “0” input Top View QSOP PS8184A 10/15/98 PS4066/PS4066A Absolute Maximum Ratings Voltages Referenced to GND V+ -0.3V to +17V VIN, VCOM, VNC, VNO Note 1 -2V to V+ +2V or 30mA, whichever occurs first Current any terminal 30mA Peak Current, COM, NO, NC pulsed at 1ms, 10% duty cycle 100mA ESD per Method >2000V Thermal Information Continuous Power Dissipation TA= +70ºC Plastic DIP derate 10.5mW/ ºC above +70ºC 800mW SO and QSOP derate 8.7mW/ ºC above +70ºC 650mW Storage Temperature -65ºC to +150ºC Lead Temperature soldering, 10s +300ºC Note Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to 30mA. Caution Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Electrical Specifications - Single +12V Supply V+ = 12V ±10%, GND = 0V, VINH = 4V, VINL = 0.8V Parameter Analog Switch Analog Signal Range 3 VANALOG Conditions Temp. °C Min 1 Typ 2 Max 1 Units Full On Resistance V+ = 12V, ICOM = 2mA, VNO = 10V 25 Full On-Resistance Match Between Channels 4 V+ = 12V, ICOM = 2mA VNO = 10V PS4066 PS4066A Full Ordering Information Part Number Temperature - Range Package PS4066CPD 0ºC to + 70ºC 14 Plastic DIP PS4066CSD 0ºC to + 70ºC 14 Narrow SO PS4066CEE 0ºC to + 70ºC 16 QSOP PS4066EPD -40ºC to + 85ºC 14 Plastic DIP PS4066ESD -40ºC to + 85ºC 14 Narrow SO PS4066ACPD 0ºC to + 70ºC 14 Plastic DIP PS4066ACSD 0ºC to + 70ºC 14 Narrow SO PS4066ACEE 0ºC to + 70ºC 16 QSOP PS4066AEPD -40ºC to + 85ºC 14 Plastic DIP PS4066AESD -40ºC to + 85ºC 14 Narrow SO PS4066AEEE -40ºC to + 85ºC 16 QSOP Figure Channel-On Capacitance Pericom Semiconductor Corporation 2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax 408 435-1100 • PS8184A 10/15/98

PDF Datasheet Preview

PS4066/PS4066A

Low-Cost, Quad, SPST, CMOS Analog Switches
• Low On-Resistance
• On-Resistance Matching Between Channels, typ
• On-Resistance Flatness, <2Ω typ
• Low Off-Channel Leakage, <100pA +25oC
• TTL/CMOS Logic Compatible
• GND-to-V+ Analog Signal Dynamic Range
• Low Power Consumption <12uW
• Low Crosstalk -86dB 1MHz
• Low Off-Isolation -58dB 1 MHz
• Wide Bandwidth > 100 MHz
• Small QSOP-16 Package Saves Board Area
• Instrumentation, ATE
• Sample-and-Holds
• Audio Switching and Routing
• Telecommunication Systems
• PBX, PABX
• Battery-Powered Systems

The PS4066/PS4066A are improved SPST CMOS analog switches ideal for low-distortion audio switching. These high precision, medium voltage switches were designed to operate with single-supplies from +3V to 16V. They are fully specified with +12V, +5V, and +3V supplies. The PS4066/PS4066A has four normally open NO switches. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rails.

With +12V power supply, the PS4066/PS4066A guarantee <45Ω on-resistance. On-resistance matching between channels is within 2Ω PS4066 . On-resistance flatness is less than 4Ω PS4066A over the specified range. The PS4066A guarantees low leakage currents <100pA 25oC, <6nA +85oC and fast switching speeds tON < 175ns . ESD sensitivity rating is >2,000V per MIL-STD 883, Method

Both devices are available in PDIP-14, narrow-body SOIC-14, and QSOP-16 packages. Available temperature ranges are commercial 0oC to 70oC , and industrial -40oC to +85oC .

For operation below 5V, the PI5A101/PI5A391/PI5A392 are also recommended.

Functional Diagrams, Pin Configurations, and Truth Table

Logic Switch
0 OFF 1 ON

Top View

PDIP/SO

N.C. = No Internal Connection Switches shown for logic “0” input

Top View

QSOP

PS8184A 10/15/98

PS4066/PS4066A

Absolute Maximum Ratings

Voltages Referenced to GND V+ -0.3V to +17V VIN, VCOM, VNC, VNO Note 1 -2V to V+ +2V
or 30mA, whichever occurs first Current any terminal 30mA Peak Current, COM, NO, NC pulsed at 1ms, 10% duty cycle 100mA ESD per Method >2000V

Thermal Information

Continuous Power Dissipation TA= +70ºC Plastic DIP derate 10.5mW/ ºC above +70ºC 800mW SO and QSOP derate 8.7mW/ ºC above +70ºC 650mW Storage Temperature -65ºC to +150ºC Lead Temperature soldering, 10s +300ºC

Note Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to 30mA.

Caution Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.

Electrical Specifications - Single +12V Supply

V+ = 12V ±10%, GND = 0V, VINH = 4V, VINL = 0.8V

Parameter

Analog Switch

Analog Signal Range 3

VANALOG

Conditions

Temp. °C Min 1 Typ 2 Max 1 Units

Full

On Resistance

V+ = 12V, ICOM = 2mA, VNO = 10V
25 Full

On-Resistance Match Between Channels 4

V+ = 12V, ICOM = 2mA VNO = 10V

PS4066 PS4066A

Full
Ordering Information

Part Number Temperature - Range

Package

PS4066CPD
0ºC to + 70ºC
14 Plastic DIP

PS4066CSD
0ºC to + 70ºC
14 Narrow SO

PS4066CEE
0ºC to + 70ºC
16 QSOP

PS4066EPD
-40ºC to + 85ºC 14 Plastic DIP

PS4066ESD
-40ºC to + 85ºC 14 Narrow SO

PS4066ACPD
0ºC to + 70ºC
14 Plastic DIP

PS4066ACSD
0ºC to + 70ºC
14 Narrow SO

PS4066ACEE
0ºC to + 70ºC
16 QSOP

PS4066AEPD
-40ºC to + 85ºC 14 Plastic DIP

PS4066AESD
-40ºC to + 85ºC 14 Narrow SO

PS4066AEEE
-40ºC to + 85ºC 16 QSOP

Figure Channel-On Capacitance

Pericom Semiconductor Corporation 2380 Bering Drive
• San Jose, CA 95131
• 1-800-435-2336
• Fax 408 435-1100
•

PS8184A 10/15/98

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PS4066AEEE Datasheet file may be downloaded here without warranties.

Datasheet ID: PS4066AEEE 510116