IAM-93516-BLK

IAM-93516-BLK Datasheet

IAM - 93516 High Linearity Integrated GaAs Mixer

Part	Datasheet
IAM-93516-BLK	IAM-93516-BLK (pdf)

Related Parts	Information
IAM-93516-TR2	IAM-93516-TR2
IAM-93516-TR1	IAM-93516-TR1

PDF Datasheet Preview
IAM - 93516 High Linearity Integrated GaAs Mixer Data Sheet AvagoTechnologies’ IAM-93516isahighlinearityGaAsFET Mixer using 0.5um enhancement mode pHEMT technology. This device houses in a 3x3 LPCC package. The IAM-93516 has a built-in LO buffer amplifier and an IF amplification stage that serve as an ideal solution for reducing board space and delivering excellent high IIP3, gain and isolation with a low LO drive power. The device is designed with a differential configuration to provide good noise immunity. The LO port is 50 ohm matched and can be driven differential or single ended. An interstage match is introduced between the mixer and amplifier stage to allow device tuning at the desired RF and LO frequency. The interstage match can be a simple low pass, high pass or intermediate frequency trap. The amplifier output port is 200 ohm matched and fully differential. The simple matching at the RF port provides for optimum input return loss, noise figure and IIP3 performance. The IAM-93516 is ideally suited for frequency down conversion for base station radio card receiver, microwave link receiver, MMDS, modulation and demodulation for receiver and general purpose resistive FET mixer, which require high linearity. All devices are 100% RF and DC tested. • Frequency down converter for base station radio card, microwave link transceiver, and MMDS • Modulation and demodulation for receiver • General purpose resistive FET mixer for other high linearity applications • DC =5V 111mA Typ. • RF GHz, PinRF = -10 dBm • LO GHz, PinLO = 0 dBm • IF = 210 MHz unless otherwise specified • High Linearity dBm IIP3 typ • Conversion Gain dB typical • Low Noise Figure dB • Wide band operation • 400-3000 MHz RF & LO input • 70 300 MHz IF output • Fully differential or single ended operation • High P1dB dB typical • Consistent RF performance over LO Power • Low current consumption 111mA typical • Excellent uniformity in product specifications • 3mm x 3mm x 0.9mm LPCC package • MTTF > 300 years[1] • MSL-1 and Lead-free. Pin Connections and Package Marking Top View Note Package marking provides orientation and identification “M2” = Device Code “X” = Month code indicates the month of manufacture +VDD Interstage Match MIX_OUT+ RF+ 1 IFA_IN+ LO Buffer LO -- Mixer Amplifier +VDD MIX_OUT - 10 11 RF - IFA_IN Interstage Match Absolute Maximum Ratings [1] Symbol VD PinRF PinLO TCH TSTG qch_b Parameter Supply Voltage [2] CW RF Input Power [2] CW LO Input Power [2] Channel Temperature Storage Temperature Thermal Resistance [4] Units V dBm °C °C °C/W Absolute maximum 7 30 18 150 -65 to 150 39 Operation of this device above any one of these parameters may cause permanent damage. Determined at DC quiescent conditions and TA = 25°C. Board package belly temperature TB is 25°C. Derate 25 mW/°C for TB > 130 °C. Channel-to-board thermal resistance measured using Infra Red Imaging Method and 150o C Liquid Crystal Measurement method. Product Consistency Distribution Charts [5,6] frequency 0 110 111 Id Figure ID mA [7] Nominal = 111.2mA Stdev = + Std Stdev = Figure GAIN dB [8] Nominal = 9.4dB Figure IIP3 dBm [8] Nominal = 23.1dBm IAM-93516 Electrical Specifications[6,8] TA = 25oC, DC = 5V, RF Freq = 1.91GHz, PinRF = -10dBm, LO Freq = 1.7GHz, PinLO = 0dBm unless otherwise specified Symbol Parameter and Test Condition Part Number Ordering Information Part Number IAM-93516-TR1 IAM-93516-TR2 IAM-93516-BLK No. Of Devices 1000 5000 100 Container 7” Reel 13” Reel Antistatic Bag For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. 5989-2800EN - March 29, 2006

PDF Datasheet Preview

IAM - 93516 High Linearity Integrated GaAs Mixer

Data Sheet

AvagoTechnologies’ IAM-93516isahighlinearityGaAsFET Mixer using 0.5um enhancement mode pHEMT technology. This device houses in a 3x3 LPCC package. The IAM-93516 has a built-in LO buffer amplifier and an IF amplification stage that serve as an ideal solution for reducing board space and delivering excellent high IIP3, gain and isolation with a low LO drive power. The device is designed with a differential configuration to provide good noise immunity. The LO port is 50 ohm matched and can be driven differential or single ended. An interstage match is introduced between the mixer and amplifier stage to allow device tuning at the desired RF and LO frequency. The interstage match can be a simple low pass, high pass or intermediate frequency trap. The amplifier output port is 200 ohm matched and fully differential. The simple matching at the RF port provides for optimum input return loss, noise figure and IIP3 performance.

The IAM-93516 is ideally suited for frequency down conversion for base station radio card receiver, microwave link receiver, MMDS, modulation and demodulation for receiver and general purpose resistive FET mixer, which require high linearity. All devices are 100% RF and DC tested.
• Frequency down converter for base station radio card, microwave link transceiver, and MMDS
• Modulation and demodulation for receiver
• General purpose resistive FET mixer for other high
linearity applications
• DC =5V 111mA Typ.
• RF GHz, PinRF = -10 dBm
• LO GHz, PinLO = 0 dBm
• IF = 210 MHz unless otherwise specified
• High Linearity dBm IIP3 typ
• Conversion Gain dB typical
• Low Noise Figure dB
• Wide band operation
• 400-3000 MHz RF & LO input
• 70 300 MHz IF output
• Fully differential or single ended operation
• High P1dB dB typical
• Consistent RF performance over LO Power
• Low current consumption 111mA typical
• Excellent uniformity in product specifications
• 3mm x 3mm x 0.9mm LPCC package
• MTTF > 300 years[1]
• MSL-1 and Lead-free.

Pin Connections and Package Marking

Top View

Note Package marking provides orientation and identification “M2” = Device Code “X” = Month code indicates the month of manufacture
+VDD

Interstage Match MIX_OUT+ RF+ 1 IFA_IN+

LO Buffer LO --

Mixer

Amplifier
+VDD

MIX_OUT - 10 11 RF - IFA_IN Interstage Match

Absolute Maximum Ratings [1]

Symbol VD PinRF PinLO TCH TSTG qch_b

Parameter Supply Voltage [2] CW RF Input Power [2] CW LO Input Power [2] Channel Temperature Storage Temperature Thermal Resistance [4]

Units V dBm °C °C °C/W

Absolute maximum 7 30 18 150 -65 to 150 39

Operation of this device above any one of these parameters may cause permanent damage.

Determined at DC quiescent conditions and TA = 25°C. Board package belly temperature TB is 25°C. Derate 25 mW/°C for TB > 130 °C. Channel-to-board thermal resistance measured using Infra Red Imaging Method and 150o C Liquid Crystal Measurement method.

Product Consistency Distribution Charts [5,6]
frequency
0 110 111 Id

Figure ID mA [7] Nominal = 111.2mA

Stdev =
+ Std

Stdev =

Figure GAIN dB [8] Nominal = 9.4dB

Figure IIP3 dBm [8] Nominal = 23.1dBm

IAM-93516 Electrical Specifications[6,8] TA = 25oC, DC = 5V, RF Freq = 1.91GHz, PinRF = -10dBm, LO Freq = 1.7GHz, PinLO = 0dBm unless otherwise specified

Symbol Parameter and Test Condition
Part Number Ordering Information

Part Number IAM-93516-TR1 IAM-93516-TR2 IAM-93516-BLK

No. Of Devices 1000 5000 100

Container 7” Reel 13” Reel Antistatic Bag

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. 5989-2800EN - March 29, 2006

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IAM-93516-BLK Datasheet file may be downloaded here without warranties.

Datasheet ID: IAM-93516-BLK 520441