HMC411MS8GE

HMC411MS8GE Datasheet

HMC411MS8G / 411MS8GE

Part	Datasheet
HMC411MS8GE	HMC411MS8GE (pdf)

PDF Datasheet Preview
HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz The HMC411MS8G / HMC411MS8GE is ideal for • Long Haul Radio Platforms • Microwave Radio • VSAT Conversion Loss 9 dB LO/RF Isolation 27 dB LO/IF Isolation 30 dB Input IP3 +16 dBm No External Components MSOP8G SMT Package Functional Diagram The HMC411MS8G & HMC411MS8GE are passive single balanced mixers that operates between 10 GHz and 15 GHz. The HMC411MS8G E operate with LO drive levels between +9 dBm and +15 dBm, and provide 9 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. MIXERS - SGL-BAL - SMT Electrical Specifications, TA = +25° C Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 Input 1 dB Compression Input * Unless otherwise noted, all measurements performed as downconverter, IF= GHz. IF = GHz LO = +13 dBm Typ. - DC - 3 9 27 30 15 - 20 16 9 Max. Units GHz dB dBm 9 - 260 For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at MIXERS - SGL-BAL - SMT v02.0607 Conversion Gain vs. Temperature LO = +13 dBm CONVERSION GAIN dB +25 C -40 C +85 C -20 9 FREQUENCY GHz Conversion Gain vs. LO Drive LO = +7 dBm LO = +9 dBm [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at 9 - 265

PDF Datasheet Preview

HMC411MS8G / 411MS8GE
v02.0607

GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz

The HMC411MS8G / HMC411MS8GE is ideal for
• Long Haul Radio Platforms
• Microwave Radio
• VSAT

Conversion Loss 9 dB LO/RF Isolation 27 dB LO/IF Isolation 30 dB Input IP3 +16 dBm No External Components MSOP8G SMT Package

Functional Diagram

The HMC411MS8G & HMC411MS8GE are passive single balanced mixers that operates between 10 GHz and 15 GHz. The HMC411MS8G E operate with LO drive levels between +9 dBm and +15 dBm, and provide 9 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias.

MIXERS - SGL-BAL - SMT

Electrical Specifications, TA = +25° C

Parameter Min.

Frequency Range, RF & LO

Frequency Range, IF

Conversion Loss

Noise Figure SSB

LO to RF Isolation

LO to IF Isolation

RF to IF Isolation

IP3 Input
1 dB Compression Input
* Unless otherwise noted, all measurements performed as downconverter, IF= GHz.

IF = GHz LO = +13 dBm

Typ. -

DC - 3 9 27 30
15 - 20 16 9

Max.

Units

GHz dB dBm
9 - 260

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at

MIXERS - SGL-BAL - SMT
v02.0607

Conversion Gain vs. Temperature LO = +13 dBm

CONVERSION GAIN dB
+25 C
-40 C
+85 C
-20 9

FREQUENCY GHz

Conversion Gain vs. LO Drive

LO = +7 dBm

LO = +9 dBm
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from

Hittite upon request.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at
9 - 265

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC411MS8GE Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC411MS8GE 517935