HLMP-FW00-JM000

HLMP-FW00-JM000 Datasheet

HLMP-FW00 5mm Flat Top InGaN White LED Lamp

Part	Datasheet
HLMP-FW00-JM000	HLMP-FW00-JM000 (pdf)

PDF Datasheet Preview
HLMP-FW00 5mm Flat Top InGaN White LED Lamp Data Sheet This wide viewing angle white LED lamp is based on InGaN material technology. A blue LED die is coated by a phosphor to produce white. The typical resulting color is described by the coordinates x = y = using the 1931 CIE Chromaticity Diagram. Benefit • Reduced Power Consumption, Higher Reliability, and Increased Optical/Mechanical Design Flexibility Compared to Incandescent Bulbs and Other Alternative White Light Sources Package Dimensions Wide viewing angle 90° • Flat top • High intensity InGaN technology • Indoor Electronic Signs and Signals • Small Area Illumination • Legend Backlighting • General Purpose Indicators Notes All dimensions are in milimetres /inches. Epoxy meniscus may extend about 1mm down the leads. CAUTION These devices are Class 1C ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details. Device Selection Guide Part Number HLMP-FW00-JM0xx Min Luminous Intensity Iv mcd 20mA Tolerance for intensity bin limit is +/-15% Max Luminous Intensity Iv mcd 20mA Absolute Maximum Ratings TA = 25°C Value 30 100 111 5 110 -40 to +85 -40 to +100 Units mA mW V °C °C °C Notes Derate linearly as shown in Figure Duty factor 10%, 1 KHz. Electrical Characteristics TA = 25°C Forward Voltage VF V IF = 20 mA Typ. Max. Capacitance C pF , VF = 0,f = 1 MHz Typ. Thermal Resistance RqJ-PIN °C/W Typ. Optical Characteristics TA = 25°C Typical Chromaticity Coordinates [1] Viewing Angle 2q1/2 Degrees [2] Typ. 90° Notes The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. q1/2 is the off-axis angle where the luminous intensity is the peak intensity. RELATIVE LUMINOUS INTENSITY WAVELENGTH nm Figure Relative Intensity vs Wavelength RELATIVE LUMINOUS INTENSITY FORWARD CURRENT - mA Figure Relative Iv vs. Forward Current IF MAX. - MAXIMUM FORWARD CURRENT - mA T A - AMBIENT TEMPERATURE - C Figure Maximum Fwd. Current vs Temperature FORWARD CURRENT - mA FORWARD VOLTAGE - V

PDF Datasheet Preview

HLMP-FW00 5mm Flat Top InGaN White LED Lamp

Data Sheet

This wide viewing angle white LED lamp is based on InGaN material technology. A blue LED die is coated by a phosphor to produce white. The typical resulting color is described by the coordinates x = y = using the 1931 CIE Chromaticity Diagram.

Benefit
• Reduced Power Consumption, Higher Reliability, and Increased Optical/Mechanical Design Flexibility Compared to Incandescent Bulbs and Other Alternative White Light Sources

Package Dimensions

Wide viewing angle 90°
• Flat top
• High intensity InGaN technology
• Indoor Electronic Signs and Signals
• Small Area Illumination
• Legend Backlighting
• General Purpose Indicators

Notes All dimensions are in milimetres /inches. Epoxy meniscus may extend about 1mm down the leads.

CAUTION These devices are Class 1C ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.

Device Selection Guide

Part Number HLMP-FW00-JM0xx

Min Luminous Intensity Iv mcd 20mA

Tolerance for intensity bin limit is +/-15%

Max Luminous Intensity Iv mcd 20mA

Absolute Maximum Ratings TA = 25°C

Value 30 100 111 5 110 -40 to +85 -40 to +100

Units mA mW V °C °C °C

Notes Derate linearly as shown in Figure Duty factor 10%, 1 KHz.

Electrical Characteristics TA = 25°C

Forward Voltage VF V IF = 20 mA

Typ.

Max.

Capacitance C pF , VF = 0,f = 1 MHz Typ.

Thermal Resistance RqJ-PIN °C/W Typ.

Optical Characteristics TA = 25°C

Typical Chromaticity Coordinates [1]

Viewing Angle 2q1/2 Degrees [2] Typ.
90°

Notes The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. q1/2 is the off-axis angle where the luminous intensity is the peak intensity.

RELATIVE LUMINOUS INTENSITY

WAVELENGTH nm

Figure Relative Intensity vs Wavelength

RELATIVE LUMINOUS INTENSITY

FORWARD CURRENT - mA

Figure Relative Iv vs. Forward Current

IF MAX. - MAXIMUM FORWARD CURRENT - mA

T A - AMBIENT TEMPERATURE - C

Figure Maximum Fwd. Current vs Temperature

FORWARD CURRENT - mA

FORWARD VOLTAGE - V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HLMP-FW00-JM000 Datasheet file may be downloaded here without warranties.

Datasheet ID: HLMP-FW00-JM000 520366