HEDS-6510#013

HEDS-6510#013 Datasheet


HEDL-65xx, HEDM-65xx, HEDS-65xx Series Large Diameter 56 mm , Housed Two and Three Channel Optical Encoders

Part Datasheet
HEDS-6510#013 HEDS-6510#013 HEDS-6510#013 (pdf)
Related Parts Information
HEDS-6510#008 HEDS-6510#008 HEDS-6510#008
HEDS-6510#006 HEDS-6510#006 HEDS-6510#006
HEDS-6511 HEDS-6511 HEDS-6511
HEDS-6510#009 HEDS-6510#009 HEDS-6510#009
HEDS-6510#010 HEDS-6510#010 HEDS-6510#010
HEDS-6510#011 HEDS-6510#011 HEDS-6510#011
HEDS-6510#012 HEDS-6510#012 HEDS-6510#012
HEDS-6510#005 HEDS-6510#005 HEDS-6510#005
HEDM-6540#T13 HEDM-6540#T13 HEDM-6540#T13
HEDS-6500#A08 HEDS-6500#A08 HEDS-6500#A08
HEDM-6505#T08 HEDM-6505#T08 HEDM-6505#T08
HEDM-6500#U13 HEDM-6500#U13 HEDM-6500#U13
HEDM-6500#U06 HEDM-6500#U06 HEDM-6500#U06
HEDM-6500#T08 HEDM-6500#T08 HEDM-6500#T08
HEDM-6500#T06 HEDM-6500#T06 HEDM-6500#T06
HEDS-6500#J06 HEDS-6500#J06 HEDS-6500#J06
HEDL-6540#B11 HEDL-6540#B11 HEDL-6540#B11
HEDS-6500#B06 HEDS-6500#B06 HEDS-6500#B06
HEDM-6540#T11 HEDM-6540#T11 HEDM-6540#T11
HEDS-6540#J10 HEDS-6540#J10 HEDS-6540#J10
HEDS-6500#J10 HEDS-6500#J10 HEDS-6500#J10
HEDS-6500#J11 HEDS-6500#J11 HEDS-6500#J11
HEDS-6500#J13 HEDS-6500#J13 HEDS-6500#J13
HEDS-6540#B09 HEDS-6540#B09 HEDS-6540#B09
HEDS-6540#B13 HEDS-6540#B13 HEDS-6540#B13
HEDS-6540#J06 HEDS-6540#J06 HEDS-6540#J06
HEDS-6500#B08 HEDS-6500#B08 HEDS-6500#B08
HEDL-6545#B09 HEDL-6545#B09 HEDL-6545#B09
HEDL-6545#J09 HEDL-6545#J09 HEDL-6545#J09
HEDS-6540#J11 HEDS-6540#J11 HEDS-6540#J11
HEDS-6540#J12 HEDS-6540#J12 HEDS-6540#J12
HEDS-6500#B12 HEDS-6500#B12 HEDS-6500#B12
HEDS-6540#J13 HEDS-6540#J13 HEDS-6540#J13
HEDS-6500#B09 HEDS-6500#B09 HEDS-6500#B09
HEDS-6545#J09 HEDS-6545#J09 HEDS-6545#J09
HEDS-6500#B13 HEDS-6500#B13 HEDS-6500#B13
PDF Datasheet Preview
HEDL-65xx, HEDM-65xx, HEDS-65xx Series Large Diameter 56 mm , Housed Two and Three Channel Optical Encoders

Data Sheet

The HEDS-65xx/HEDL-65xx are high performance two and three channel optical incremental encoders. These encoders high reliability, high resolution, and easy assembly. Each encoder contains a lensed LED source emitter , an integrated circuit with detectors and output and a codewheel which rotates between the emitter and detector integrated circuit. The outputs of the HEDS-6500 are two single ended square waves in quadrature. The HEDL-65xx outputs are differential.

The line driver option offers enhanced performance when the encoder is used in noisy or when it is required to drive long distances.

The line driver option utilizes an industry standard line driver IC AM26C31Q which provides uf arenocduetIipvauentrdss are 26C32 and 26C33.
The quadrature signals are through a cable and 10-pin female connector. Please refer to the ordering information at the end of this data sheet for a selection matrix.
• Two channel quadrature output with optional index pulse
• TTL compatible single ended outputs on HEDS Series
• 100ºC operating temperature for metal code wheel
• 70°C operating temperature for mylar code wheel
• Industry standard AM26C31Q CMOS line driver IC on

The HEDS-65xx / HEDL-65xx provide motion detection to a very high resolution and accept a variety of shaft sizes up to a maximum of 5/8 inches.

Typical applications include plotters, tape drives, tables, and automatic handlers.

Note Avago Technologies encoders are not recommended for use in safety critical applications. Eg. ABS braking systems, power steering, life support systems and critical care medical equipment. Please contact sales representative if more clarification is needed.

HEDL-65XX fig 1

Assembled Unit

HEDS-65XX #xxx YYMM

COUNTRY OF ORIGIN

Base Plate

ON B.C. B.C.

HEDL-65XX fig 2

SLOTTED

DIMENSIONS IN MILLIMETERS AND INCHES .

Top Cover Housing

HEDS-65XX #xxx YYMM

COUNTRY OF ORIGIN

HEDL-54XX fig 3

DIMENSIONS IN MILLIMETERS AND INCHES .

HEDL-65XX fig 4

Pinout A

LENS LED

PHOTO DIODES COMPARATORS

SIGNAL PROCESSING CIRCUITRY

INDEX-PROCESSING CIRCUITRY
1 CHANNEL A 2 VCC 3 GND 4 NC 5 NC 6 GROUND 7 VCC 8 CHANNEL B 9 VCC 10 CHANNEL I

EMITTER SECTION

Pinout B

CODE WHEEL

DETECTOR SECTION

LENS

PHOTO DIODES COMHPEADRLA-6T5OXRXSfig 5a

SIGNAL PROCESSING CIRCUITRY

INDEX-PROCESSING CIRCUITRY

PCB/CABLE/CONNECTOR
1 NC 2 VCC 3 GND 4 NC 5 A LINE DRIVER 6 A 7 B 8 B 9 INDEX 10 INDEX

EMITTER SECTION

CODE WHEEL

DETECTOR SECTION

PCB/CABLE/CONNECTOR
Ordering Information for 2CH and 3CH Encoder Modules

Encoders Metal Codewheel up to 100°C HEDS  -  65  

OUTPUTS 
0 2 CH 4 3 CH

THROUGH HOLE 

None mm    in.

OPTION

RESOLUTION CYCLES/REV     A = 500   B = 1000   J = 1024
        05 06 08 09 10 11 12 13

HEDS-6500#

A* * * * ** * * B* * * * ** * * J * * * * ** * *

HEDS-6505#

A B * * J *

HEDS-6540#

A* * * * ** * * B* * * * ** * * J * * * * ** * *

HEDS-6545#

A * * B * J * *

SHAFT DIAMETER
05 3/16 in. 06 1/4 in. 08 3/8 in. 09 1/2 in.
10 5/8 in. 11 4 mm 12 6 mm 13 8 mm

Encoders Film Codewheel up to 70°C HEDM 65

OPTION

OUTPUTS
0 2 CH 4 3 CH

THROUGH HOLE
0 None 5 mm    in

RESOLUTION CYCLES/REV

T 2000 U 2048 2 CH only

SHAFT DIAMETER
05 3/16 in. 06 1/4 in. 08 3/8 in. 09 1/2 in.
10 5/8 in. 11 4 mm 12 6 mm 13 8 mm
        05 06 08 09 10 11 12 13

HEDM-6500#

T * * U * *

HEDM-6505#

T * * U *

HEDM-6540#

HEDM-6545#
Ordering Information for 2CH and 3CH Encoder Modules with Line Driver

Encoders with Metal Codewheel up to 100°C

HEDL  -  65

OPTION

OUTPUTS 
0 2 CH 4 3 CH

THROUGH HOLE 

None mm    in.

RESOLUTION CYCLES/REV  
  A = 500   B = 1000   J = 1024
        05 06 08 09 10 11 12 13

HEDL-6540#

HEDL-6545#

B * J * * *
Ordering Information for HEDS=76XX Centering Tools

HEDS-6510 Option  0  

SHAFT DIAMETER
05 3/16 in. 06 1/4 in. 08 3/8 in. 09 1/2 in.
10 5/8 in. 11 4 mm 12 6 mm 13 8 mm
        05 06 08 09 10 11 12 13

HEDS-6510
0* * * * ** * *

SHAFT DIAMETER
08 3/8 in. 09 1/2 in. 10 5/8 in.
11 4 mm 12 6 mm 13 8 mm
Ordering Information for HEDS-65XX Codewheel         Gapping Tool         HEDS-6511

For product information and a complete list of distributors, please go to our website:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 2008 Avago Technologies Limited. All rights reserved. Obsoletes 5988-9398EN AV02-0991EN January 30, 2008
More datasheets: 751A505 | 727A508 | 710A205F | 726A508 | 710A908B | HEDS-6510#008 | HEDS-6510#006 | HEDS-6511 | HEDS-6510#009 | HEDS-6510#010


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HEDS-6510#013 Datasheet file may be downloaded here without warranties.

Datasheet ID: HEDS-6510#013 520284