710A908B

710A908B Datasheet


Part Number 710A205F 710A205G 710A908B 770A508F

Part Datasheet
710A908B 710A908B 710A908B (pdf)
Related Parts Information
770A508F 770A508F 770A508F
770A508G 770A508G 770A508G
735A504 735A504 735A504
731A505 731A505 731A505
732A508 732A508 732A508
743A508 743A508 743A508
745A508 745A508 745A508
751A505 751A505 751A505
727A508 727A508 727A508
710A205F 710A205F 710A205F
726A508 726A508 726A508
PDF Datasheet Preview
Specifications for UHF Connectors

UHF style connectors are inexpensive, general purpose connectors with non-constant impedance for use at 500 volts or less, and for use with low frequencies to 200Mhz for best performance, or to 500MHz but with diminished performance. These coaxial connectors are widely used in citizens band communications, CCTV, public address systems, mobile radio equipment, civil defense, ship to shore communications, antenna connections, landing systems, and ground control apparatus. UHF connectors use a 5/8-24 threaded coupling. They are available in a wide selection of sizes to fit various cable sizes.

MATERIALS

Connector Parts Connector Body and Parts Male Contact Pin Outer Contact Crimp Ferrule Insulators, Plating

Material Brass Annealed Copper Delrin, Teflon Nickel

ELECTRICAL

Requirement Impedance Frequency Range VSWR Working Voltage At Sea level Insulation Resistance Contact Resistance Test Voltage

Performance Non Constant 0-500MHz Max.
750V rms
5000 Megohm Min. 5mW Max. 2000V rms

MECHANICAL & ENVIRONMENTAL

Requirement

Performance

Durability
500 Matings

RG58 - 60 Lb. Min.

Cable Retention Cable Types RG59 - 75 Lb. Min.

RG8, 213 - 150 Lb. Min.

Coupling Nut
45 lbs. Maximum

Temperature Range

Delrin -55 to +85°C Teflon -55 to +200°C

FOR TECHNICAL SUPPORT PHONE 973-347-4040 / FAX 973-347-2111
s - Page 23 -

UHF Connectors

Crimp Plugs

UHF cable plugs are available in two-piece crimp and older versions. Several cable diameters are facilitated with these connectors for applicable applications. A reducing adapter is used for smaller cable sizes when using the solder types.

Part Number 710A205F 710A205G 710A908B 770A508F
770A508G

Crimp Plug Crimp Plug Twist/Solder Plug, PL259 Reducing Adapter, UG175/U Reducing Adapter, UG176/U

RG/U Fig. Cable No.
59, 62 106
8, 213 107

Fig. 106

Fig. 107

RoHS compliant REQUEST QUOTE DRAWING

Jacks

REQUEST

Fig. 108

Two panel jack style are available as standard items. These panel jacks will facilitate any cable size by soldering the center conductor to the connector’s solder-cup contact.
726A508 727A508
More datasheets: 770A508G | 735A504 | 731A505 | 732A508 | 743A508 | 745A508 | 751A505 | 727A508 | 710A205F | 726A508


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 710A908B Datasheet file may be downloaded here without warranties.

Datasheet ID: 710A908B 521985