732A508 735A504 743A508 745A508 751A505
Part | Datasheet |
---|---|
![]() |
745A508 (pdf) |
Related Parts | Information |
---|---|
![]() |
770A508F |
![]() |
770A508G |
![]() |
735A504 |
![]() |
731A505 |
![]() |
732A508 |
![]() |
743A508 |
![]() |
751A505 |
![]() |
727A508 |
![]() |
710A205F |
![]() |
726A508 |
![]() |
710A908B |
PDF Datasheet Preview |
---|
Specifications for UHF Connectors UHF style connectors are inexpensive, general purpose connectors with non-constant impedance for use at 500 volts or less, and for use with low frequencies to 200Mhz for best performance, or to 500MHz but with diminished performance. These coaxial connectors are widely used in citizens band communications, CCTV, public address systems, mobile radio equipment, civil defense, ship to shore communications, antenna connections, landing systems, and ground control apparatus. UHF connectors use a 5/8-24 threaded coupling. They are available in a wide selection of sizes to fit various cable sizes. MATERIALS Connector Parts Connector Body and Parts Male Contact Pin Outer Contact Crimp Ferrule Insulators, Plating Material Brass Annealed Copper Delrin, Teflon Nickel ELECTRICAL Requirement Impedance Frequency Range VSWR Working Voltage At Sea level Insulation Resistance Contact Resistance Test Voltage Performance Non Constant 0-500MHz Max. 750V rms 5000 Megohm Min. 5mW Max. 2000V rms MECHANICAL & ENVIRONMENTAL Requirement Performance Durability 500 Matings RG58 - 60 Lb. Min. Cable Retention Cable Types RG59 - 75 Lb. Min. RG8, 213 - 150 Lb. Min. Coupling Nut 45 lbs. Maximum Temperature Range Delrin -55 to +85°C Teflon -55 to +200°C FOR TECHNICAL SUPPORT PHONE 973-347-4040 / FAX 973-347-2111 s - Page 23 - UHF Connectors Crimp Plugs UHF cable plugs are available in two-piece crimp and older versions. Several cable diameters are facilitated with these connectors for applicable applications. A reducing adapter is used for smaller cable sizes when using the solder types. Part Number 710A205F 710A205G 710A908B 770A508F 770A508G Crimp Plug Crimp Plug Twist/Solder Plug, PL259 Reducing Adapter, UG175/U Reducing Adapter, UG176/U RG/U Fig. Cable No. 59, 62 106 8, 213 107 Fig. 106 Fig. 107 RoHS compliant REQUEST QUOTE DRAWING Jacks REQUEST Fig. 108 Two panel jack style are available as standard items. These panel jacks will facilitate any cable size by soldering the center conductor to the connector’s solder-cup contact. 726A508 727A508 |
More datasheets: 6LS102KBHCT | 6LS221KRCCT | 6LS471KBFCT | ZXLD1601H6TA | 770A508F | 770A508G | 735A504 | 731A505 | 732A508 | 743A508 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 745A508 Datasheet file may be downloaded here without warranties.