AFBR-5103PZ

AFBR-5103PZ Datasheet

AFBR-5103Z, AFBR-5103TZ, AFBR-5103AZ, AFBR-5103ATZ, AFBR-5103PZ and AFBR-5103PEZ FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style

Part	Datasheet
AFBR-5103PZ	AFBR-5103PZ (pdf)

Related Parts	Information
AFBR-5103PEZ	AFBR-5103PEZ
AFBR-5103AZ	AFBR-5103AZ
AFBR-5103Z	AFBR-5103Z
AFBR-5103ATZ	AFBR-5103ATZ
AFBR-5103TZ	AFBR-5103TZ

PDF Datasheet Preview
AFBR-5103Z, AFBR-5103TZ, AFBR-5103AZ, AFBR-5103ATZ, AFBR-5103PZ and AFBR-5103PEZ FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style Data Sheet The AFBR-5100Z family of transceivers from Avago Technologies provide the system designer with products to implement a range of FDDI and ATM Asynchronous Transfer Mode designs at the 100 Mbps/125 MBd rate. The transceivers are all supplied in the new industry standard 1x9 SIP package style with either a duplex SC or a duplex ST* connector interface. FDDI PMD, ATM and Fast Ethernet 2000 m Backbone Links The AFBR-5103Z/-5103TZare 1300 nm products with optical performance compliant with the FDDI PMD standard. The FDDI PMD standard is ISO/IEC 9314-3 1990 and ANSI X3.166 - These transceivers for 2000 meter multimode fiber backbones are supplied in the small 1x9 duplex SC or ST package style for those designers who want to avoid the larger MIC/R Media Interface Connector/Receptacle defined in the FDDI PMD standard. Avago Technologies also provides several other FDDI products compliant with the PMD and SM-PMD standards. These products are available with MIC/R, ST and FC connector styles. They are available in the 1x13 and 2x11 transceiver and 16 pin transmitter/receiver package styles for those designs that require these alternate configurations. • Full Compliance with the Optical Performance Requirements of the FDDI PMD Standard • Full Compliance with the FDDI LCF-PMD Standard • Full Compliance with the Optical Performance Require- ments of the ATM 100 Mbps Physical Layer • Full Compliance with the Optical Performance Require- ments of 100 Base-FX Version of IEEE 802.3u • Multisourced 1x9 Package Style with Choice of Duplex SC or Duplex ST* Receptacle • Wave Solder and Aqueous Wash Process Compatible • RoHS Compliance • Multimode Fiber Backbone Links • Multimode Fiber Wiring Closet to Desktop Links • Multimode Fiber Media Converter Note The “T” in the product numbers indicates a transceiver with a duplex ST connector receptacle. Product numbers without a “T” indicate transceivers with a duplex SC connector receptacle. The AFBR-5103Z/-5103TZ is also useful for both ATM 100 Mbps interfaces and Fast Ethernet 100 Base-FX interfaces. The ATM Forum User-Network Interface UNI Standard, Version defines the Physical Layer for 100 Mbps Multimode Fiber Interface for ATM in Section to be the FDDI PMD Standard. Likewise, the Fast Ethernet Alliance defines the Physical Layer for 100 Base-FX for Fast Ethernet to be the FDDI PMD Standard. *ST is a registered trademark of AT&T Lightguide Cable Connectors. ATM applications for physical layers other than 100 Mbps Multimode Fiber Interface are supported by Avago Technologies. Products are available for both the single mode and the multimode fiber SONET-OC-3C STS-3C ATM interface and the 155 Mbps ATM 94 MBd multimode fiber ATM interface as specified in the ATM Forum UNI. Transmitter Sections The transmitter sections of the AFBR-5103Z series utilize 1300 nm Surface Emitting InGaAsP LEDs. These LEDs are packaged in the optical subassembly portion of the transmitter section. They are driven by a custom silicon IC which converts differential PECL logic signals, ECL referenced shifted to a +5 Volt supply, into an analog LED drive current. Receiver Sections The receiver sections of the AFBR-5103Z series utilize InGaAs PIN photodiodes coupled to a custom silicon transimpedance preamplifier IC. These are packaged in the optical subassembly portion of the receiver. These PIN/preamplifier combinations are coupled to a custom quantizer IC which provides the final pulse shaping for the logic output and the Signal Detect function. The data output is differential. The signal detect output is single-ended. Both data and signal detect outputs are PECL compatible, ECL referenced shifted to a +5 Volt power supply. Package The overall package concept for the Avago Technologies transceivers consists of the following basic elements two optical subassemblies, an electrical subassembly and the housing as illustrated in Figure 1 and Figure 1a. Figure 2b shows the outline drawing for options that include mezzanine height with extended shield. The package outline drawing and pin out are shown in Figures 2, 2a and The details of this package outline and pin out are compliant with the multisource definition of the 1x9 SIP. The low profile of the Avago Technologies transceiver design complies with the maximum height allowed for the duplex SC connector over the entire length of the package. The optical subassemblies utilize a high volume assembly process together with low cost lens elements which result in a cost effective building block. The electrical subassembly consists of a high volume multilayer printed circuit board on which the IC chips and various surface-mounted passive circuit elements are attached. The package includes internal shields for the electrical and optical subassemblies to ensure low EMI emissions and high immunity to external EMI fields. The outer housing including the duplex SC connector receptacle or the duplex ST ports is molded of filled non-conductive plastic to provide mechanical strength and electrical isolation. The solder posts of the Avago Technologies’ design are isolated from the circuit design of the transceiver and do not require connection to a ground plane on the circuit board. The transceiver is attached to a printed circuit board with the nine signal pins and the two solder posts which exit the bottom of the housing. The two solder posts provide the primary mechanical strength to withstand the loads imposed on the transceiver by mating with duplex or simplex SC or ST connectored fiber cables. DIFFERENTIAL DATA OUT SINGLE-ENDED SIGNAL DETECT OUT ELECTRICAL SUBASSEMBLY QUANTIZER IC PREAMP IC DUPLEX SC RECEPTACLE PIN PHOTODIODE OPTICAL SUBASSEMBLIES DIFFERENTIAL LED DATA IN DRIVER IC Ordering Information 1300nm LED, 125 MBd, FDDI, 100 Mbps ATM and Fast Eternet temperature range 0°C to +70°C AFBR-5103Z Duplex SC Connector 1X9, Standard Height AFBR-5103TZ Duplex ST Connector 1X9 AFBR-5103PZ Duplex SC Connector 1x9, Mezzanine Height AFBR-5103PEZ Duplex SC Connector 1x9, Mezzanine Height with Extended Shield 1300nm LED, 125 MBd, FDDI, 100 Mbps ATM and Fast Ethernet temperature range to +85°C AFBR-5103AZ Duplex SC Connector 1X9 AFBR-5103ATZ Duplex ST Connector 1X9 For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-2292EN AV02-3606EN - June 12, 2012

PDF Datasheet Preview

AFBR-5103Z, AFBR-5103TZ, AFBR-5103AZ, AFBR-5103ATZ, AFBR-5103PZ and AFBR-5103PEZ FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style

Data Sheet

The AFBR-5100Z family of transceivers from Avago Technologies provide the system designer with products to implement a range of FDDI and ATM Asynchronous Transfer Mode designs at the 100 Mbps/125 MBd rate.

The transceivers are all supplied in the new industry standard 1x9 SIP package style with either a duplex SC or a duplex ST* connector interface.

FDDI PMD, ATM and Fast Ethernet 2000 m Backbone Links

The AFBR-5103Z/-5103TZare 1300 nm products with optical performance compliant with the FDDI PMD standard. The FDDI PMD standard is ISO/IEC 9314-3 1990 and ANSI X3.166 -

These transceivers for 2000 meter multimode fiber backbones are supplied in the small 1x9 duplex SC or ST package style for those designers who want to avoid the larger MIC/R Media Interface Connector/Receptacle defined in the FDDI PMD standard.

Avago Technologies also provides several other FDDI products compliant with the PMD and SM-PMD standards. These products are available with MIC/R, ST and FC connector styles. They are available in the 1x13 and 2x11 transceiver and 16 pin transmitter/receiver package styles for those designs that require these alternate configurations.
• Full Compliance with the Optical Performance Requirements of the FDDI PMD Standard
• Full Compliance with the FDDI LCF-PMD Standard
• Full Compliance with the Optical Performance Require-
ments of the ATM 100 Mbps Physical Layer
• Full Compliance with the Optical Performance Require-
ments of 100 Base-FX Version of IEEE 802.3u
• Multisourced 1x9 Package Style with Choice of Duplex

SC or Duplex ST* Receptacle
• Wave Solder and Aqueous Wash Process Compatible
• RoHS Compliance
• Multimode Fiber Backbone Links
• Multimode Fiber Wiring Closet to Desktop Links
• Multimode Fiber Media Converter

Note The “T” in the product numbers indicates a transceiver with a duplex ST connector receptacle. Product numbers without a “T” indicate transceivers with a duplex SC connector receptacle.

The AFBR-5103Z/-5103TZ is also useful for both ATM 100 Mbps interfaces and Fast Ethernet 100 Base-FX interfaces. The ATM Forum User-Network Interface UNI Standard, Version defines the Physical Layer for 100 Mbps Multimode Fiber Interface for ATM in Section to be the FDDI PMD Standard. Likewise, the Fast Ethernet Alliance defines the Physical Layer for 100 Base-FX for Fast Ethernet to be the FDDI PMD Standard.
*ST is a registered trademark of AT&T Lightguide Cable Connectors.

ATM applications for physical layers other than 100 Mbps Multimode Fiber Interface are supported by Avago Technologies. Products are available for both the single mode and the multimode fiber SONET-OC-3C STS-3C ATM interface and the 155 Mbps ATM 94 MBd multimode fiber ATM interface as specified in the ATM Forum UNI.

Transmitter Sections

The transmitter sections of the AFBR-5103Z series utilize 1300 nm Surface Emitting InGaAsP LEDs. These LEDs are packaged in the optical subassembly portion of the transmitter section. They are driven by a custom silicon IC which converts differential PECL logic signals, ECL referenced shifted to a +5 Volt supply, into an analog LED drive current.

Receiver Sections

The receiver sections of the AFBR-5103Z series utilize InGaAs PIN photodiodes coupled to a custom silicon transimpedance preamplifier IC. These are packaged in the optical subassembly portion of the receiver.

These PIN/preamplifier combinations are coupled to a custom quantizer IC which provides the final pulse shaping for the logic output and the Signal Detect function. The data output is differential. The signal detect output is single-ended. Both data and signal detect outputs are PECL compatible, ECL referenced shifted to a +5 Volt power supply.

Package

The overall package concept for the Avago Technologies transceivers consists of the following basic elements two optical subassemblies, an electrical subassembly and the housing as illustrated in Figure 1 and Figure 1a.

Figure 2b shows the outline drawing for options that include mezzanine height with extended shield.

The package outline drawing and pin out are shown in Figures 2, 2a and The details of this package outline and pin out are compliant with the multisource definition of the 1x9 SIP. The low profile of the Avago Technologies transceiver design complies with the maximum height allowed for the duplex SC connector over the entire length of the package.

The optical subassemblies utilize a high volume assembly process together with low cost lens elements which result in a cost effective building block.

The electrical subassembly consists of a high volume multilayer printed circuit board on which the IC chips and various surface-mounted passive circuit elements are attached.

The package includes internal shields for the electrical and optical subassemblies to ensure low EMI emissions and high immunity to external EMI fields.

The outer housing including the duplex SC connector receptacle or the duplex ST ports is molded of filled non-conductive plastic to provide mechanical strength and electrical isolation. The solder posts of the Avago Technologies’ design are isolated from the circuit design of the transceiver and do not require connection to a ground plane on the circuit board.

The transceiver is attached to a printed circuit board with the nine signal pins and the two solder posts which exit the bottom of the housing. The two solder posts provide the primary mechanical strength to withstand the loads imposed on the transceiver by mating with duplex or simplex SC or ST connectored fiber cables.

DIFFERENTIAL DATA OUT SINGLE-ENDED SIGNAL DETECT OUT

ELECTRICAL SUBASSEMBLY

QUANTIZER IC

PREAMP IC

DUPLEX SC RECEPTACLE PIN PHOTODIODE

OPTICAL SUBASSEMBLIES

DIFFERENTIAL LED

DATA IN

DRIVER IC
Ordering Information 1300nm LED, 125 MBd, FDDI, 100 Mbps ATM and Fast Eternet temperature range 0°C to +70°C

AFBR-5103Z Duplex SC Connector 1X9, Standard Height AFBR-5103TZ Duplex ST Connector 1X9 AFBR-5103PZ Duplex SC Connector 1x9, Mezzanine Height AFBR-5103PEZ Duplex SC Connector 1x9, Mezzanine Height with Extended Shield
1300nm LED, 125 MBd, FDDI, 100 Mbps ATM and Fast Ethernet temperature range to +85°C

AFBR-5103AZ Duplex SC Connector 1X9 AFBR-5103ATZ Duplex ST Connector 1X9

For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-2292EN AV02-3606EN - June 12, 2012

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AFBR-5103PZ Datasheet file may be downloaded here without warranties.

Datasheet ID: AFBR-5103PZ 520037