HSMC-A400-S30M1

HSMC-A400-S30M1 Datasheet

CAUTION HSMN-, HSMK-, LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Part	Datasheet
HSMC-A400-S30M1	HSMC-A400-S30M1 (pdf)

Related Parts	Information
HSMZ-A400-U80M1	HSMZ-A400-U80M1
HSMN-A401-P7QM2	HSMN-A401-P7QM2
HSMU-A400-U85M1	HSMU-A400-U85M1
HSMA-A400-T35M1	HSMA-A400-T35M1
HSMN-A401-P4QM2	HSMN-A401-P4QM2
HSMN-A400-R8PM2	HSMN-A400-R8PM2
HSMN-A400-Q8QM2	HSMN-A400-Q8QM2
HSMA-A401-U20M1	HSMA-A401-U20M1
HSMM-A401-S7YM2	HSMM-A401-S7YM2
HSMM-A401-S4YM2	HSMM-A401-S4YM2
HSMC-A401-T40M1	HSMC-A401-T40M1
HSMC-A401-T60M1	HSMC-A401-T60M1
HSMC-A401-T80M1	HSMC-A401-T80M1
HSMA-A401-U80M1	HSMA-A401-U80M1

PDF Datasheet Preview
SMT LED Surface Mount LED Indicator Data Sheet Avago Power PLCC-4 is an extension of our PLCC-2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC-2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs. These SMT LEDs have higher reliability and better performance and are designed to work under a wide range of environmental conditions. This higher reliability makes them suitable for use under harsh environment and conditions like automotive. In addition, they are also suitable to be used in electronic signs and signals. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin except for red color , to provide close uniformity. These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they also can be mounted using through-the-wave soldering process. There are a variety of colors and various viewing angles 30°, 60° and 120° available in these SMT LEDs. Ideally, the 30° parts are suitable for light piping where focused intensities are required. As for the 60° and 120°, they are most suitable for automotive interior and exterior lighting and electronic signs applications. x Industry standard PLCC-4 x High reliability LED package x High brightness using AlInGaP and InGaN dice technologies x High optical efficiency x Higher ambient temperature at the same current possible compared to PLCC-2 x Available in full selection of colors x Super wide viewing angle at x Available in 8mm carrier tape on 7-inch reel x Compatible with both IR and TTW soldering process x JEDEC MSL 2a x High reliability LED package due to enhanced silicone resin material for InGaN family x Interior automotive Instrument panel backlighting Central console backlighting Cabin backlighting Navigation and audio system Dome lighting Push button backlighting x Exterior automotive Turn signals CHMSL Rear combination lamp Puddle light x Electronic signs and signals Interior full color sign Variable message sign x Office automation, home appliances, industrial equipment Front panel backlighting Push button backlighting Display backlighting CAUTION HSMN-, HSMK-, LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Dimensions TYP. CATHODE MARKING NOTES ALL DIMENSIONS IN mm. ELECTRICAL CONNECTION BETWEEN ALL CATHODES IS RECOMMENDED. Device Selection Guide Color Min. IV mcd Max. IV mcd Test Current mA Dice Technology HSMC-A400-S30M1 AlInGaP Red Orange HSMJ-A401-T40M1 AlInGaP HSMJ-A401-U40M1 AlInGaP Orange HSML-A401-U40M1 AlInGaP Amber HSMA-A401-U45M1 AlInGaP Emerald Green HSME-A401-P4PM1

PDF Datasheet Preview

SMT LED Surface Mount LED Indicator

Data Sheet

Avago Power PLCC-4 is an extension of our PLCC-2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC-2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs.

These SMT LEDs have higher reliability and better performance and are designed to work under a wide range of environmental conditions. This higher reliability makes them suitable for use under harsh environment and conditions like automotive. In addition, they are also suitable to be used in electronic signs and signals.

To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin except for red color , to provide close uniformity.

These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they also can be mounted using through-the-wave soldering process.

There are a variety of colors and various viewing angles 30°, 60° and 120° available in these SMT LEDs. Ideally, the 30° parts are suitable for light piping where focused intensities are required. As for the 60° and 120°, they are most suitable for automotive interior and exterior lighting and electronic signs applications.
x Industry standard PLCC-4 x High reliability LED package x High brightness using AlInGaP and InGaN dice
technologies
x High optical efficiency x Higher ambient temperature at the same current
possible compared to PLCC-2
x Available in full selection of colors x Super wide viewing angle at x Available in 8mm carrier tape on 7-inch reel x Compatible with both IR and TTW soldering process x JEDEC MSL 2a x High reliability LED package due to enhanced silicone
resin material for InGaN family
x Interior automotive Instrument panel backlighting Central console backlighting Cabin backlighting Navigation and audio system Dome lighting Push button backlighting
x Exterior automotive Turn signals CHMSL Rear combination lamp Puddle light
x Electronic signs and signals Interior full color sign Variable message sign
x Office automation, home appliances, industrial equipment Front panel backlighting Push button backlighting Display backlighting

CAUTION HSMN-, HSMK-, LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Package Dimensions

TYP.

CATHODE MARKING

NOTES ALL DIMENSIONS IN mm. ELECTRICAL CONNECTION BETWEEN ALL CATHODES IS RECOMMENDED.

Device Selection Guide

Color

Min. IV mcd

Max. IV mcd

Test Current mA Dice Technology

HSMC-A400-S30M1

AlInGaP

Red Orange

HSMJ-A401-T40M1

AlInGaP

HSMJ-A401-U40M1

AlInGaP

Orange

HSML-A401-U40M1

AlInGaP

Amber

HSMA-A401-U45M1

AlInGaP

Emerald Green HSME-A401-P4PM1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSMC-A400-S30M1 Datasheet file may be downloaded here without warranties.

Datasheet ID: HSMC-A400-S30M1 520436