ADNS-6130-001

ADNS-6130-001 Datasheet

ADNS-6130-001 Laser Mouse Trim Lens

Part	Datasheet
ADNS-6130-001	ADNS-6130-001 (pdf)

PDF Datasheet Preview
ADNS-6130-001 Laser Mouse Trim Lens Data Sheet The ADNS-6130-001 laser mouse lens are designed for use with Avago Technologies laser mouse sensors and the illumination subsystem provided by the ADNS-6230001 VCSEL assembly clip and the ADNV-6330 or ADNV6340 Single-Mode Vertical-Cavity Surface Emitting Lasers VCSEL . Together with the VCSEL, the ADNS-6120 or ADNS-6130-001 laser mouse lens provides the directed illumination and optical imaging necessary for proper operation of the laser mouse sensor. ADNS-6130-001 laser mouse lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. Max +0.2mm protrusion is allowed at the molding gate of either 1 side of lens. Figure ADNS-6130-001 laser mouse trim lens outline drawings and details MOUSE SENSOR LID ADNS-6130-001 A OBJECT SURFACE Figure Optical system assembly cross-section diagram B Figure Logo location Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Min. Typical Max. Units Distance from Object Surface to Lens Reference Plane Distance from Mouse Sensor Lid Surface to Object Surface Conditions ADNS-6130-001 Sensor lid must be in contact with lens housing surface Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Design Wavelength Symbol Min. Typical Max. Units Lens Material* Index of Refraction Conditions l = 842 nm *Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Mounting Instructions for the ADNS-6130-001 Laser Mouse Lenses to the Base Plate An IGES format drawing file with design specifications for laser mouse base plate features is available. These features are useful in maintaining proper positioning and alignment of the ADNS-6120 or ADNS-6130-001 laser mouse lens when used with the Avago Technologies Laser Mouse Sensor. This file can be obtained by contacting your local Avago Technologies sales representative. Figure Illustration of base plate mounting features for ADNS-6130-001 laser mouse trim lens For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2008 Avago Technologies. All rights reserved. AV02-1540EN - September 17, 2008

PDF Datasheet Preview

ADNS-6130-001 Laser Mouse Trim Lens

Data Sheet

The ADNS-6130-001 laser mouse lens are designed for use with Avago Technologies laser mouse sensors and the illumination subsystem provided by the ADNS-6230001 VCSEL assembly clip and the ADNV-6330 or ADNV6340 Single-Mode Vertical-Cavity Surface Emitting Lasers VCSEL . Together with the VCSEL, the ADNS-6120 or

ADNS-6130-001 laser mouse lens provides the directed illumination and optical imaging necessary for proper operation of the laser mouse sensor. ADNS-6130-001 laser mouse lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces.

Max +0.2mm protrusion is allowed at the molding gate of
either 1 side of lens.

Figure ADNS-6130-001 laser mouse trim lens outline drawings and details

MOUSE SENSOR LID

ADNS-6130-001

A OBJECT SURFACE

Figure Optical system assembly cross-section diagram

B Figure Logo location

Mechanical Assembly Requirements

All specifications reference Figure 2, Optical System Assembly Diagram

Parameters

Symbol Min. Typical Max. Units

Distance from Object Surface to Lens Reference Plane

Distance from Mouse Sensor

Lid Surface to Object Surface

Conditions ADNS-6130-001

Sensor lid must be in contact with lens housing surface

Lens Design Optical Performance Specifications

All specifications are based on the Mechanical Assembly Requirements.

Parameters Design Wavelength

Symbol Min.

Typical Max.

Units

Lens Material* Index of Refraction

Conditions l = 842 nm
*Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation.

Mounting Instructions for the ADNS-6130-001 Laser Mouse Lenses to the Base Plate

An IGES format drawing file with design specifications for laser mouse base plate features is available. These features are useful in maintaining proper positioning and alignment of the ADNS-6120 or ADNS-6130-001 laser mouse lens when used with the Avago Technologies Laser Mouse Sensor. This file can be obtained by contacting your local Avago Technologies sales representative.

Figure Illustration of base plate mounting features for ADNS-6130-001 laser mouse trim lens

For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2008 Avago Technologies. All rights reserved. AV02-1540EN - September 17, 2008

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-6130-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-6130-001 519996