AD10048P3L-001

AD10048P3L-001 Datasheet

AD10048P3L-001

Part	Datasheet
AD10048P3L-001	AD10048P3L-001 (pdf)

PDF Datasheet Preview
Embedded Power for Business-Critical Continuity AD10048P3L-001 100 Watts Total Power Input Voltage # of Outputs: 100 Watts 90 - 264 Vac Single 1 of 2 Special Features • Active power factor correction • EN6100-3-2 compliant • CE Mark EMC & LVD • Universal ac input • Fully regulated output • Overcurrent, overvoltage and thermal protection • Constant voltage • Level V efficiency • High MTBF • IEC320 ac receptacle, 3 pin type C6 • Built in EMI filter • CISPR 22 Class B • AC Input fuse • Complies with One Watt Input Energy Star / Blue Angel requirement • POE isolation on output Safety • UL UL 60950-1 • CSA-C22.2 no.60950-1 • NEMKO EN/IEC60950-1 • CB Certificate and report Electrical Specifications Input Frequency Inrush current Input current Efficiency EMI/RFI Safety ground leakage current Output Maximum Power Po Hold-up time Overvoltage protection: Overcurrent protection: Thermal protection: 90 - 264 Vac wide range 47 - 63Hz 40 A maximum 264 Vac, cold start 25 °C A maximum 90% typical FCC Part 15, Subpart B Class B & EN55022 CISPR 22 Class-B mA maximum 50/60 Hz, 264 Vac input 100 W 10 ms. minimum at full load 115 Vac 53 - 60 V Latching type, recycle ac to reset Output short circuit protection auto recover Overload protection 110 - 120% above maximum rating 105 °C to 120 °C Trip point output will latch off Cable/connector: DC cable length mm center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature Storage temperature Electromagnetic susceptibility: 0 ° to + 45 °C ambient - 40 °C to + 70 °C Designed to meet EN61000-4-2, -4, -5, level 4 EN61000-4-3, -6, 10v/m EN61000-4-8, -11 EN61000-3-3 and EN61000-3-2 Class A Humidity MTBF demonstrated: Operating non-condensing 5% to 90% RH > 300,000 hours at full load and 25 °C ambient conditions Embedded Power for Business-Critical Continuity Ordering Information Model Number Maximum Power Output Voltage Maximum Load Peak Load1 Regulation2 Ripple P/P PARD 3 AD10048P3L-001 100 W 48 Vdc ± 5% < 500 mV Peak current lasting <4 seconds with a maximum 10% duty cycle. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF tantalum capacitor in parallel with a µF capacitor at rated line voltage and load ranges. Mechanical Drawing EARTH LIVE NEUTRAL 1500 H x W x L mm H x mm W x mm L AC Input Connector IEC320, C6 AC Input power cord sold separately Specifications subject to change without notice. All dimensions in inches mm , tolerance is ± ± mm Warranty 2 year Weight lb./ kg AC input power cord sold separately. Specifications at factory settings at 115 Vac input, 25 °C unless otherwise stated 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone +1 760 930 4600 Facsimile +1 760 930 0698 2 of 2 Europe UK Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone +44 0 1384 842 211 Facsimile +44 0 1384 843 355 Asia HK 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone +852 2176 3333 Facsimile +852 2176 3888 For global contact, visit: techsupport.embeddedpower While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2011 Emerson Electric Co.

PDF Datasheet Preview

Embedded Power for Business-Critical Continuity

AD10048P3L-001
100 Watts

Total Power Input Voltage # of Outputs:
100 Watts 90 - 264 Vac Single
1 of 2

Special Features
• Active power factor correction
• EN6100-3-2 compliant
• CE Mark EMC & LVD
• Universal ac input
• Fully regulated output
• Overcurrent, overvoltage
and thermal protection
• Constant voltage
• Level V efficiency
• High MTBF
• IEC320 ac receptacle, 3 pin
type C6
• Built in EMI filter
• CISPR 22 Class B
• AC Input fuse
• Complies with One Watt Input

Energy Star / Blue Angel requirement
• POE isolation on output

Safety
• UL

UL 60950-1
• CSA-C22.2 no.60950-1
• NEMKO EN/IEC60950-1
• CB

Certificate and report

Electrical Specifications

Input Frequency Inrush current Input current Efficiency EMI/RFI Safety ground leakage current Output Maximum Power Po Hold-up time Overvoltage protection:

Overcurrent protection:

Thermal protection:
90 - 264 Vac wide range 47 - 63Hz 40 A maximum 264 Vac, cold start 25 °C A maximum 90% typical FCC Part 15, Subpart B Class B & EN55022 CISPR 22 Class-B mA maximum 50/60 Hz, 264 Vac input
100 W 10 ms. minimum at full load 115 Vac 53 - 60 V Latching type, recycle ac to reset Output short circuit protection auto recover Overload protection 110 - 120% above maximum rating 105 °C to 120 °C Trip point output will latch off

Cable/connector:

DC cable length mm center plug DC plug center +v DC plug outer -v

Environmental Specifications

Operating temperature Storage temperature Electromagnetic susceptibility:
0 ° to + 45 °C ambient - 40 °C to + 70 °C Designed to meet EN61000-4-2, -4, -5, level 4 EN61000-4-3, -6, 10v/m EN61000-4-8, -11 EN61000-3-3 and EN61000-3-2 Class A

Humidity MTBF demonstrated:

Operating non-condensing 5% to 90% RH > 300,000 hours at full load and 25 °C ambient conditions

Embedded Power for Business-Critical Continuity
Ordering Information

Model Number

Maximum Power

Output Voltage

Maximum Load

Peak Load1

Regulation2

Ripple P/P PARD 3

AD10048P3L-001 100 W
48 Vdc
± 5%
< 500 mV

Peak current lasting <4 seconds with a maximum 10% duty cycle.

At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory
settings.

Peak-to-peak with 20 MHz bandwidth and 10 µF tantalum capacitor in parallel with a µF capacitor at rated
line voltage and load ranges.

Mechanical Drawing

EARTH

LIVE

NEUTRAL
1500

H x W x L mm H x mm W x mm L AC Input Connector IEC320, C6 AC Input power cord sold separately

Specifications subject to change without notice.

All dimensions in inches mm , tolerance is ± ± mm

Warranty 2 year Weight lb./ kg AC input power cord sold separately. Specifications at factory settings at 115 Vac input, 25 °C unless
otherwise stated
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone +1 760 930 4600 Facsimile +1 760 930 0698
2 of 2

Europe UK

Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone +44 0 1384 842 211 Facsimile +44 0 1384 843 355

Asia HK
14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone +852 2176 3333 Facsimile +852 2176 3888

For global contact, visit:
techsupport.embeddedpower

While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

Emerson Network Power. The global leader in enabling business-critical continuity.

AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets

Services Surge Protection

EmersonNetworkPower.com

Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2011 Emerson Electric Co.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AD10048P3L-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: AD10048P3L-001 518387