ADNS-5110-001 Trim Lens for LED Mouse
Part | Datasheet |
---|---|
![]() |
ADNS-5110-001 (pdf) |
PDF Datasheet Preview |
---|
ADNS-5110-001 Trim Lens for LED Mouse Data Sheet The ADNS-5110-001 trim lens is designed for use with Avago Technologies ADNS-5xxx series of LED mouse sensors. Together with the LED and the sensor, the ADNS-5110-001 trim lens completes the optical navigation system to provide the directed illumination for the optical imaging process necessary for the operation of the optical sensor. The ADNS-5110-001 lens is a precision molded optical component and should be handled with care to avoid scratching and contamination of the optical surfaces. Lens ID WXYZ Cavity No. Logo Lens surface 3 Lens surface 4 Lens surface 1 Notes Dimensions in millimeters/inches Dimensional tolerance ±0.1mm Angular tolerance ±3° Maximum flash +0.20mm reference dimension Figure1. ADNS-5110-001 trim lens outline drawings and details Detail B Lens surface 5 Lens surface 6 Lens surface 2 Section A - A at tip Detail - B Scale 5:1 Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Min Distance from Object Surface to Lens Reference Plane Distance from Object Surface to Sensor Reference Plane Typical Unit Conditions Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Magnification Design Wavelength Object to Image Distance Lens Material Index of Refraction Optical Depth of Field Coverage Radius N DOF Typical 639 Unit Conditions At nominal plane. Design value At 639nm Design value * Lens material is polycarbonate or Polystyrene HH30. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Sensor Lens Surface Lens Reference Plane Note A Distance from object surface to lens reference plane B Distance from object surface to sensor reference plane Figure Distance from lens reference plane to tracking surface Z Mounting Illustration for the ADNS-5110-001 LED Mouse Trim Lens The STEP or IGES format drawing file with design specifications for the LED mouse base plate features and lens are available. These features are useful in maintaining proper positioning and alignment of the ADNS-5110-001 trim lens in the optical system assembly of the mouse. These file can be obtained by downloading from Avago Technologies website or by contacting your local Avago Technologies sales representative. LED Clip Sensor Customer supplied PCB ADNS-5110-001 |
More datasheets: AT28BV16-25SC | AT28BV16-25PI | AT28BV16-25PC | AT28BV16-25JI | AT28BV16-25JC | AT28BV16-30JC | A000111 | 510-000 | AT75C310-Q160 | FDP15N65 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-5110-001 Datasheet file may be downloaded here without warranties.