ADNS-5100/ADNS-5100-001 Solid-State Optical Mouse Lens
Part | Datasheet |
---|---|
![]() |
ADNS-5100 (pdf) |
Related Parts | Information |
---|---|
![]() |
ADNS-5100-001 |
PDF Datasheet Preview |
---|
ADNS-5100/ADNS-5100-001 Solid-State Optical Mouse Lens Data Sheet The ADNS-5100 and ADNS-5100-001 Solid-State Optical Mouse Lenses are designed for use with the ADNS-5XXX series of Avago Technologies Optical Mouse Sensors. The optical system is completed with the illumination subsystem provided by the ADNS-5200 LED Assembly Clip and the HLMP-ED80-XX000 LED. Together with the LED, the ADNS-5100 and ADNS-5100-001 provides the directed illumination and optical imaging necessary for proper operation of the Optical Mouse Sensor. The lenses are precision molded optical components and should be handled with care to avoid scratching of the optical surfaces. Ordering Information Specify Part Number as follows: Flange Round Part Number ADNS-5100 Trim ADNS-5100-001 Outline Drawings Including Markings and Logos ADNS-5100 Material Polycarbonate or Polystyrene HH30 Polycarbonate or Polystyrene HH30 Figure ADNS-5100 Solid State Optical Mouse Round Lens outline drawing and detail Outline Drawings Including Markings and Logos ADNS-5100-001 Figure ADNS-5100-001 Solid State Optical Mouse Trim Lens outline drawing and detail Mechanical Assemble Requirements All specifications reference Figure 3, Optical System Assembly Diagram Distance from Object Surface to Lens Reference Plane Distance from Mouse Sensor Lid contact with lens Surface to Object Surface Symbol Min. Typical Max. Units Conditions Sensor lid must be in contact with lens housing surface Figure Optical System Assembly Diagram Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Numerical Aperture Magnification Design Wavelength Object to Image Distance Lens Material*Index of Refraction Depth of Field Die Coverage Radius Symbol Min. Typical Max. Units nm mm Conditions Image at nominal location l = 639nm *Lens material is polycarbonate or polystyrene HH30, therefore, cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Mounting Instructions for the ADNS-5100 Lens to the Base Plate An IGES format drawing file with design specifications for mouse base plate features is available. Note :- Stand-off of the base plate shall not be larger than 5mm as lens surface 7 size is 5.60mm.” Figure Illustration of base plate mounting features These features are useful in maintaining proper positioning and alignment of the ADNS-5100 when used with the Avago Technologies Optical Mouse Sensor. This file can be obtained by contacting your local Avago Technologies sales representative. For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0086EN AV02-0115EN - July 31, 2007 |
More datasheets: ASA02A24-L | ASA00B48-L | CS-JUICYBOARD-02 | CS-JUICYBOARD-04 | CS-JUICYBOARD-03 | CS-JUICYBOARD-01 | CS-JUICYBOARD-05 | CS-JUICYBOARD-06 | DFR0274 | 74ACT323PC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-5100 Datasheet file may be downloaded here without warranties.