ADNS-5100-001

ADNS-5100-001 Datasheet


ADNS-5100/ADNS-5100-001 Solid-State Optical Mouse Lens

Part Datasheet
ADNS-5100-001 ADNS-5100-001 ADNS-5100-001 (pdf)
Related Parts Information
ADNS-5100 ADNS-5100 ADNS-5100
PDF Datasheet Preview
ADNS-5100/ADNS-5100-001 Solid-State Optical Mouse Lens

Data Sheet

The ADNS-5100 and ADNS-5100-001 Solid-State Optical Mouse Lenses are designed for use with the ADNS-5XXX series of Avago Technologies Optical Mouse Sensors. The optical system is completed with the illumination subsystem provided by the ADNS-5200 LED Assembly Clip and the HLMP-ED80-XX000 LED. Together with the LED, the ADNS-5100 and ADNS-5100-001 provides the directed illumination and optical imaging necessary for proper operation of the Optical Mouse Sensor. The lenses are precision molded optical components and should be handled with care to avoid scratching of the optical surfaces.
Ordering Information

Specify Part Number as follows:

Flange Round

Part Number ADNS-5100

Trim

ADNS-5100-001

Outline Drawings Including Markings and Logos

ADNS-5100

Material

Polycarbonate or Polystyrene HH30

Polycarbonate or Polystyrene HH30

Figure ADNS-5100 Solid State Optical Mouse Round Lens outline drawing and detail

Outline Drawings Including Markings and Logos ADNS-5100-001

Figure ADNS-5100-001 Solid State Optical Mouse Trim Lens outline drawing and detail

Mechanical Assemble Requirements

All specifications reference Figure 3, Optical System Assembly Diagram

Distance from Object Surface to Lens Reference Plane

Distance from Mouse Sensor Lid contact with lens Surface to Object Surface

Symbol Min. Typical Max. Units

Conditions

Sensor lid must be in contact with lens housing surface

Figure Optical System Assembly Diagram

Lens Design Optical Performance Specifications

All specifications are based on the Mechanical Assembly Requirements.

Numerical Aperture Magnification Design Wavelength Object to Image Distance Lens Material*Index of Refraction Depth of Field Die Coverage Radius

Symbol Min. Typical

Max.

Units
nm mm

Conditions Image at nominal location l = 639nm
*Lens material is polycarbonate or polystyrene HH30, therefore, cyanoacrylate based adhesives should not be used as they will cause lens material deformation.

Mounting Instructions for the ADNS-5100 Lens to the Base Plate

An IGES format drawing file with design specifications for mouse base plate features is available.

Note :- Stand-off of the base plate shall not be larger than 5mm as lens surface 7 size is 5.60mm.”

Figure Illustration of base plate mounting features

These features are useful in maintaining proper positioning and alignment of the ADNS-5100 when used with the Avago Technologies Optical Mouse Sensor. This file can be obtained by contacting your local Avago Technologies sales representative.

For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0086EN AV02-0115EN - July 31, 2007
More datasheets: ASA00B48-L | CS-JUICYBOARD-02 | CS-JUICYBOARD-04 | CS-JUICYBOARD-03 | CS-JUICYBOARD-01 | CS-JUICYBOARD-05 | CS-JUICYBOARD-06 | DFR0274 | 74ACT323PC | ADNS-5100


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-5100-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-5100-001 519988