ADNK-6033-CC24

ADNK-6033-CC24 Datasheet

ADNK-6033-CC24 USB 2.4GHz RF Wireless Laser Mouse Designer’s Kit

Part	Datasheet
ADNK-6033-CC24	ADNK-6033-CC24 (pdf)

PDF Datasheet Preview
ADNK-6033-CC24 USB 2.4GHz RF Wireless Laser Mouse Designer’s Kit Product Overview Avago Technologies and Chipcon have joined forces to produce a new wireless laser mouse reference design kit. Based on the new Avago Technologies ADNS-6030 low power laser mouse sensor, Chipcon’s RadioDeskTM with CC2500 2.4GHz RF transceiver, and Holtek Semiconductor HT82K68E and HT82K96E microcontrollers, this reference design kit provides a low cost, power efficient and feature-rich solution in one neat package. The Avago Technologies ADNS-6030 low power laser mouse sensor, an 18-pin staggered dual inline package DIP , is based on LaserStream Technology, which measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement. Its high-performance, low power architecture is capable of sensing high-speed mouse motion while prolonging battery life, two performance areas essential in demanding wireless applications. The ADNS-6030 sensor along with the ADNS-6120 or ADNS-6130-001 lens, ADNS-6230-001 clip and ADNV6330 VCSEL form a complete and compact laser mouse tracking system. There is no moving part, which means high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly. • Complete wireless laser mouse reference design kit • 98SE, Windows 2000 and Windows XP compatibility • USB low-speed compliance • User identity code to avoid conflict with other de- vices • A high data rate 2.4GHz RF link • Transmission data rate of 250Kbps • 15 meters communication distance • Avago Technologies’ new LaserStream Technology • Smooth surface navigation • High speed motion detection up to 20ips and 8G • 800cpi resolution • Self-adjusting power-saving modes for longest bat- tery life • Laser fault detect circuitry on-chip in the navigation sensor for Eye Safety Compliance • No mechanical moving parts • Minimal number of passive components • High reliability The CC2500 is a single chip 2.4GHz transceiver designed for very low power wireless applications. The circuit is intended for the ISM and SRD frequency band at 2400MHz-2483.5MHz. The RF transceiver is integrated with a highly configurable baseband modem which has a configurable data rate up to 500kbps. CC2500 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake on radio. The main operating parameters and the 64-byte transmit/receive FIFOs of CC2500 can be controlled via an SPI interface. The Holtek HT82K68E is an 8-bit high performance peripheral interface OTP microcontroller, designed for multiple I/O product and HT68K96E are the 8-bit high performance RISC-like microcontroller designed for USB product applications. A HALT feature is included in both HT82K68E and HT68K96E to reduce power consumption. This kit is connectable to a PC via the USB port. It is based on the GHz RF technology, the data generated from displacement detection/button status in the laser mouse is encoded with a pre-defined serial type protocol handled by firmware in the MCU. In the RF stage, the encoded data is used for FSK modulation. The captured data from the RF receiver stage is decoded with a corresponding packet format used for mouse applications. The final data is sent to the host through the USB interface. VSCEL PCB VSCEL SENSOR CLIP LENS BASE PLATE SURFACE Figure Sectional view of PCB assembly highlighting all laser mouse components laser mouse sensor, clip, lens, VCSEL, PCB, and base plate Schematic Design of ADNK-6033-CC24 Designer’s Kit Wireless Laser Mouse Figure Overall Circuit-level block diagram for ADNK-6033-CC24 designer’s kit wireless laser mouse Figure Circuit diagram of voltage regulator schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse Figure Circuit diagram of CC2500 RF transceiver schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse Figure Circuit diagram of HT82K68E microcontroller schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse Figure Circuit diagram of ADNS-6030 sensor and buttons schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse Schematic Design of ADNK-6033-CC24 Designer’s Kit USB Dongle Figure Overall Circuit-level block diagram for ADNK-6033-CC24 designer’s kit USB Dongle Figure Circuit diagram of voltage regulator schematic in ADNK-6033-CC24 designer’s kit USB Dongle Figure Circuit diagram of CC2500 RF transceiver schematic in ADNK-6033-CC24 designer’s kit USB Dongle Figure Circuit diagram of HT82K96E microcontroller and USB connector schematic in ADNK-6033-CC24 designer’s kit USB Dongle Kit Components The designer’s kit contains components as follows: Name ADNK-6033-CC24 a. Wireless Laser Mouse Mouse Set b. USB Dongle Reference Design Mouse Set ADNS-6030 Laser Mouse Sensor Sensor ADNS-6120 Laser Mouse Round Lens Plate Ordering Information For ordering information, please contact your local Avago Technologies sales representative. Avago Technologies’ Partner For distributor, rep and local sales office info, please go to our web site. Chipcon AS Gaustadalléen 21 NO-0349 Oslo NORWAY Tel +47 22 95 85 45 Email: Quantity 1 For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. 5989-3606EN -- May 16, 2006

PDF Datasheet Preview

ADNK-6033-CC24 USB 2.4GHz RF Wireless Laser Mouse Designer’s Kit

Product Overview

Avago Technologies and Chipcon have joined forces to produce a new wireless laser mouse reference design kit. Based on the new Avago Technologies ADNS-6030 low power laser mouse sensor, Chipcon’s RadioDeskTM with CC2500 2.4GHz RF transceiver, and Holtek Semiconductor HT82K68E and HT82K96E microcontrollers, this reference design kit provides a low cost, power efficient and feature-rich solution in one neat package.

The Avago Technologies ADNS-6030 low power laser mouse sensor, an 18-pin staggered dual inline package DIP , is based on LaserStream Technology, which measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement. Its high-performance, low power architecture is capable of sensing high-speed mouse motion while prolonging battery life, two performance areas essential in demanding wireless applications.

The ADNS-6030 sensor along with the ADNS-6120 or ADNS-6130-001 lens, ADNS-6230-001 clip and ADNV6330 VCSEL form a complete and compact laser mouse tracking system. There is no moving part, which means high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly.
• Complete wireless laser mouse reference design kit
• 98SE, Windows 2000 and Windows XP
compatibility
• USB low-speed compliance
• User identity code to avoid conflict with other de-
vices
• A high data rate 2.4GHz RF link
• Transmission data rate of 250Kbps
• 15 meters communication distance
• Avago Technologies’ new LaserStream Technology
• Smooth surface navigation
• High speed motion detection up to 20ips and 8G
• 800cpi resolution
• Self-adjusting power-saving modes for longest bat-
tery life
• Laser fault detect circuitry on-chip in the navigation
sensor for Eye Safety Compliance
• No mechanical moving parts
• Minimal number of passive components
• High reliability

The CC2500 is a single chip 2.4GHz transceiver designed for very low power wireless applications. The circuit is intended for the ISM and SRD frequency band at 2400MHz-2483.5MHz. The RF transceiver is integrated with a highly configurable baseband modem which has a configurable data rate up to 500kbps. CC2500 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake on radio. The main operating parameters and the 64-byte transmit/receive FIFOs of CC2500 can be controlled via an SPI interface.

The Holtek HT82K68E is an 8-bit high performance peripheral interface OTP microcontroller, designed for multiple I/O product and HT68K96E are the 8-bit high performance RISC-like microcontroller designed for USB product applications. A HALT feature is included in both HT82K68E and HT68K96E to reduce power consumption.

This kit is connectable to a PC via the USB port. It is based on the GHz RF technology, the data generated from displacement detection/button status in the laser mouse is encoded with a pre-defined serial type protocol handled by firmware in the MCU. In the RF stage, the encoded data is used for FSK modulation. The captured data from the RF receiver stage is decoded with a corresponding packet format used for mouse applications. The final data is sent to the host through the USB interface.

VSCEL PCB

VSCEL

SENSOR

CLIP

LENS BASE PLATE

SURFACE

Figure Sectional view of PCB assembly highlighting all laser mouse components laser mouse sensor, clip, lens, VCSEL, PCB, and base plate

Schematic Design of ADNK-6033-CC24 Designer’s Kit Wireless Laser Mouse

Figure Overall Circuit-level block diagram for ADNK-6033-CC24 designer’s kit wireless laser mouse Figure Circuit diagram of voltage regulator schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse

Figure Circuit diagram of CC2500 RF transceiver schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse

Figure Circuit diagram of HT82K68E microcontroller schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse

Figure Circuit diagram of ADNS-6030 sensor and buttons schematic in ADNK-6033-CC24 designer’s kit wireless laser mouse

Schematic Design of ADNK-6033-CC24 Designer’s Kit USB Dongle

Figure Overall Circuit-level block diagram for ADNK-6033-CC24 designer’s kit USB Dongle Figure Circuit diagram of voltage regulator schematic in ADNK-6033-CC24 designer’s kit USB Dongle

Figure Circuit diagram of CC2500 RF transceiver schematic in ADNK-6033-CC24 designer’s kit USB Dongle

Figure Circuit diagram of HT82K96E microcontroller and USB connector schematic in ADNK-6033-CC24 designer’s kit USB Dongle

Kit Components

The designer’s kit contains components as follows:

Name

ADNK-6033-CC24 a. Wireless Laser Mouse

Mouse Set
b. USB Dongle

Reference Design Mouse Set

ADNS-6030

Laser Mouse Sensor

Sensor

ADNS-6120

Laser Mouse Round Lens Plate
Ordering Information
For ordering information, please contact your local Avago Technologies sales representative.

Avago Technologies’ Partner

For distributor, rep and local sales office info, please go to our web site.

Chipcon AS Gaustadalléen 21 NO-0349 Oslo NORWAY Tel +47 22 95 85 45 Email:

Quantity 1

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright 2006 Avago Technologies Pte. All rights reserved. 5989-3606EN -- May 16, 2006

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNK-6033-CC24 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNK-6033-CC24 519952