ACPM-7372-TR1

ACPM-7372-TR1 Datasheet

ACPM-7372 UMTS Band8 880-915MHz 4x4 Power Amplifier Module

Part	Datasheet
ACPM-7372-TR1	ACPM-7372-TR1 (pdf)

Related Parts	Information
ACPM-7372-BLK	ACPM-7372-BLK

PDF Datasheet Preview
ACPM-7372 UMTS Band8 880-915MHz 4x4 Power Amplifier Module Data Sheet The ACPM-7372 is a fully matched 10-pin surface mount module developed for UMTS EGSM. This power amplifier module operates in the 880-915MHz bandwidth. The ACPM-7372 meets stringent UMTS linearity requirements up to 28.75dBm output power. The 4mmx4mm form factor package is self contained, incorporating 50ohm input and output matching networks. The ACPM-7372 features 5th generation of CoolPAM circuit technology which supports 3 power modes bypass, mid and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. Active bypass feature is added to 5th generation to enhance PAE further at low output range. This helps to extend talk time. The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness. Block Diagram Bypass / Mid Power Mode / High Power Mode and output • Lead-free, RoHS compliant, Green Ordering Number of Devices Container ACPM-7372-TR1 1,000 178mm 7” Tape/Reel ACPM-7372-BLK 100 BULK Vcc1 5 Vcc2 6 Bias Circuit & Control Logic Ven 1 Vmode 2 Vbp 3 RF In 4 Input Match & Power Divider Inter-Stage Match Output Match Bypass Circuit Impedence Transformer RF Out 8 Absolute Maximum Ratings No damage assuming only one parameter is set at limit at a time with all other Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage. Min. Typ. RF Input Power Pin DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven Mode Control Voltage Vmode Bypass Control Vbp Storage Temperature Tstg * High Power Mode 5dBm for Bypass and Mid Power Mode Max. Unit +125 Recommended Operating Condition Min. Typ. Max. Unit DC Supply Voltage Vcc1, Vcc2 Enable Voltage Ven High Mode Control Voltage Vmode High

PDF Datasheet Preview

ACPM-7372 UMTS Band8 880-915MHz 4x4 Power Amplifier Module

Data Sheet

The ACPM-7372 is a fully matched 10-pin surface mount module developed for UMTS EGSM. This power amplifier module operates in the 880-915MHz bandwidth. The ACPM-7372 meets stringent UMTS linearity requirements up to 28.75dBm output power. The 4mmx4mm form factor package is self contained, incorporating 50ohm input and output matching networks.

The ACPM-7372 features 5th generation of CoolPAM circuit technology which supports 3 power modes bypass, mid and high power modes. The CoolPAM is stage bypass technology enhancing PAE power added efficiency at low and medium power range. Active bypass feature is added to 5th generation to enhance PAE further at low output range. This helps to extend talk time.

The power amplifier is manufactured on an advanced InGaP HBT hetero-junction Bipolar Transistor MMIC microwave monolithic integrated circuit technology offering state-of-the-art reliability, temperature stability and ruggedness.

Block Diagram

Bypass / Mid Power Mode / High Power Mode
and output
• Lead-free, RoHS compliant, Green
Ordering

Number of Devices Container

ACPM-7372-TR1 1,000
178mm 7” Tape/Reel

ACPM-7372-BLK 100

BULK

Vcc1 5 Vcc2 6

Bias Circuit & Control Logic

Ven 1 Vmode 2 Vbp 3

RF In 4

Input Match & Power Divider

Inter-Stage Match

Output Match

Bypass Circuit

Impedence Transformer

RF Out 8

Absolute Maximum Ratings

No damage assuming only one parameter is set at limit at a time with all other

Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage.

Min.

Typ.

RF Input Power Pin

DC Supply Voltage Vcc1, Vcc2

Enable Voltage Ven

Mode Control Voltage Vmode

Bypass Control Vbp

Storage Temperature Tstg
* High Power Mode 5dBm for Bypass and Mid Power Mode

Max.

Unit
+125

Recommended Operating Condition

Min.

Typ.

Max.

Unit

DC Supply Voltage Vcc1, Vcc2

Enable Voltage Ven

High

Mode Control Voltage Vmode

High

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-7372-TR1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-7372-TR1 519884