AB5030S

AB5030S Datasheet

AB5010S

Part	Datasheet
AB5030S	AB5030S (pdf)

PDF Datasheet Preview
EMI Absorber AB-5000S Data Sheet Product Description 3Μ EMI Absorber AB-5000S Series consists of flexible, soft metal flakes filler in polymer resin with acrylic pressure sensitive adhesive. It is supplied on a removable liner for easy handling and die-cutting 3Μ EMI Absorber AB-5000S is available in sheets. 3Μ EMI Absorber AB-5000S is typically used for applications requiring electromagnetic absorbing performance. It is designed to suppress radiated noise from electrical devices for broadband radio frequency range. Common uses include mobile phone SAR reduction , computer, digital still camera, RF block, military equipments for radar avoidance and stealth performance. Attenuation and Power Loss Many factors determine the true attenuation of an electromagnetic absorbing material, including shape and thickness, intimacy of substrate contact, smoothness of application surface, strength and frequency of the EMI signal, etc. However, using standard tests and fixtures, it is possible to determine a value for the signal attenuation. 3Μ EMI Absorber AB-5000S typical attenuation range is dependent on thickness. 3M EMI Absorber AB 5000S Series Typical Properties Properties Typical Value Type of Backing Type of Adhesive Product Number Thickness 1 Standard packaging Temperature range Surface resistivity 2 Thermal conductivity Tensile strength 3 Attenuation S11 Reflection Loss and Power Loss4 Polymer resin with metal flake filler Acrylic non-conductive pressure sensitive adhesive PSA AB5010S AB5020S AB5030S AB5050S 0.10mm 0.20mm 0.30mm 0.50mm 210mm x 297mm -25 ~ 85℃ 1x10 W/mK 6.0MPa min Refer to attached chart AB5100S 1.00mm This value does not contain a double side adhesive tape thickness. Typical adhesive tape thickness is AB5010S contains 30 adhesive Test method ASTM D257 Test method JIS K 6251 Attenuation measured by 7mm coaxial verification kit under short fixed condition. Power loss measured by line. Reflection Power Loss 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800-676-8381 Fax 800-828-9329 Litho in USA 3M 2007 All rights reserved. 78-8131-7717-3 B

PDF Datasheet Preview

EMI Absorber

AB-5000S

Data Sheet

Product Description
3Μ EMI Absorber AB-5000S Series consists of flexible, soft metal flakes filler in polymer resin with acrylic pressure sensitive adhesive. It is supplied on a removable liner for easy handling and die-cutting
3Μ EMI Absorber AB-5000S is available in sheets.
3Μ EMI Absorber AB-5000S is typically used for applications requiring electromagnetic absorbing performance. It is designed to suppress radiated noise from electrical devices for broadband radio frequency range.

Common uses include mobile phone SAR reduction , computer, digital still camera, RF block, military equipments for radar avoidance and stealth performance.

Attenuation and Power Loss

Many factors determine the true attenuation of an electromagnetic absorbing material, including shape and thickness, intimacy of substrate contact, smoothness of application surface, strength and frequency of the EMI signal, etc. However, using standard tests and fixtures, it is possible to determine a value for the signal attenuation. 3Μ EMI Absorber AB-5000S typical attenuation range is dependent on thickness.
3M EMI Absorber AB 5000S Series Typical Properties

Properties

Typical Value

Type of Backing Type of Adhesive Product Number Thickness 1 Standard packaging Temperature range Surface resistivity 2 Thermal conductivity Tensile strength 3 Attenuation S11 Reflection Loss and Power Loss4

Polymer resin with metal flake filler

Acrylic non-conductive pressure sensitive adhesive PSA

AB5010S

AB5020S

AB5030S

AB5050S
0.10mm
0.20mm
0.30mm
0.50mm
210mm x 297mm
-25 ~ 85℃
1x10

W/mK
6.0MPa min

Refer to attached chart

AB5100S 1.00mm

This value does not contain a double side adhesive tape thickness. Typical adhesive tape thickness is AB5010S contains 30 adhesive Test method ASTM D257 Test method JIS K 6251 Attenuation measured by 7mm coaxial verification kit under short fixed condition. Power loss measured by line.

Reflection

Power Loss
3M is a trademark of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800-676-8381 Fax 800-828-9329

Litho in USA 3M 2007 All rights reserved. 78-8131-7717-3 B

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AB5030S Datasheet file may be downloaded here without warranties.

Datasheet ID: AB5030S 519698