SE316-T

SE316-T Datasheet

16 port, SNMP, Modbus/TCP Model SE316-T

Part	Datasheet
SE316-T	SE316-T (pdf)

PDF Datasheet Preview
Monitored Ethernet Switch 16 port, SNMP, Modbus/TCP Model SE316-T SE316-T • Communicates with HMI/SCADA software via Modbus/TCP • Integrated with iView2 - SNMP Management Software free download • Energy Efficient Ethernet EEE , IEEE 802.3az for low energy consumption • Wide temperature range -40 to 75°C • DIN rail or wall/panel mountable • Redundant dual 12 to 48VDC power inputs • EMS Level 3 Protection • Designed for hazardous locations UL C1D2, ATEX Zone 2 pending , IECEx pending • Port-based QoS feature for deterministic data transmission • Loop detection and event alarm • Power failure indicated by a relay and LED indicator Introduction SE300 series is the industry’s first design for Ethernet IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over Advantech B+B SmartWorx SE300 series monitored switches can be used as plugand-play unmanaged switches right out of the box. Installing the Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions. When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS Networking Management Software at the same time. This gives full access control to both control engineers and IT managers. Specifications COMMUNICATIONS Standards IEEE 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab 10/100Base-T X Transmission Distance Up to 100 meters Transmission Speed 100 Mbps INTERFACE Connectors Ethernet LED Indicators 16 x RJ45 6-pin removable screw terminal power & relay Ethernet, Auto Sensing, 10/100BaseTX, Duplex and MDIX P1, P2, P-Fail, Loop Detection 10/100T X Link/Activity, Speed Basic Monitoring & Management Capabilities iView2 gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location. It features an intuitive Graphical User Interface GUI that provides a real-life representation of all installed eWorx SE300 Series switches, displaying device functions, port settings, device status information and traffic statistics via SNMP. iView2 can also configure eWorx SE300 series switches monitoring capabilities for automation applications via the popular Modbus TCP/IP protocol. Control engineers can use existing HMI/SCADA software to integrate the network status by creating extra tags for real-time monitoring. iView2 is a standalone software that supports multiple platforms and operating systems. iView2 Features for eWorx SE300 series Switches Monitoring • System information IP/MAC address • Port status • Port speed • Flow control • Link up counter • TX packets counter, RX packets counter • TX error packets counter, RX error packets counter • Firmware version • PoE status PoE model/s only Management • Configure IP mode • Set IP address • Set TCP Modbus/TCP time-out • Create Community Strings • Configure Traps / Enabling an Intelligent Planet All product specifications are subject to change without notice. SE316-T_2016 Monitored Ethernet Switch 16 port, SNMP, Modbus/TCP Model SE316-T Specifications - continued Specifications - continued SWITCH PROPERTIES ENVIRONMENT MAC Table Size Operating Temperature -40 ~ 75°C -40 ~ 167°F Packet Buffer Size 128K bit Storage Temperature -40 ~ 85°C -40 ~ 185°F Switching Capacity Gbps Operating Humidity 10 ~ 95% non-condensing Product Ordering Information MODEL # DESCRIPTION SE316-T 16-port 10/100 Mbps Monitored Ethernet Switch RJ45 OPERATING TEMPERATURE 10/100 MBPS GIGABIT 100FX 100/1000BASE-SFP -40~75°C FIBER COMBO PORT, 10/100/1000BASE-T X OR 100/1000BASE-SFP TYPE CONNECTOR Accessories - optional MODEL # MDR-40-24 DIN Rail Power supply, 24VDC 40 Watt C5UMB3FBG 3 ft. 1 M , Gray, Category 5e UTP Patch Cord C5UMB7FBG 7 ft. 2 M , Gray, Category 5e UTP Patch Cord Package Checklist Ethernet Switch, Quick Start Guide, DIN-Rail mount bracket installed , Wall mount bracket Warranty Limited lifetime warranty for Advantech B+B designed and/or manufactured products. Corporate Headquarters 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 Model SE316-T Mechanical Diagram \| DIN Rail & Wall Mount Options Units = [inches] mm 724 20 Corporate Headquarters 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

PDF Datasheet Preview

Monitored Ethernet Switch
16 port, SNMP, Modbus/TCP Model SE316-T

SE316-T
• Communicates with HMI/SCADA software via Modbus/TCP
• Integrated with iView2 - SNMP Management Software free download
• Energy Efficient Ethernet EEE , IEEE 802.3az for low energy consumption
• Wide temperature range -40 to 75°C
• DIN rail or wall/panel mountable
• Redundant dual 12 to 48VDC power inputs
• EMS Level 3 Protection
• Designed for hazardous locations UL C1D2, ATEX Zone 2 pending , IECEx pending
• Port-based QoS feature for deterministic data transmission
• Loop detection and event alarm
• Power failure indicated by a relay and LED indicator

Introduction SE300 series is the industry’s first design for Ethernet IEEE802.3az - Energy

Ethernet switches that cut power usage by up to 60%, significantly saving energy
usage in the field and reducing total cost of ownership over

Advantech B+B SmartWorx SE300 series monitored switches can be used as plugand-play unmanaged switches right out of the box. Installing the Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions.

When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS Networking Management Software at the same time. This gives full access control to both control engineers and IT managers.

Specifications

COMMUNICATIONS

Standards

IEEE 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
10/100Base-T X

Transmission Distance Up to 100 meters

Transmission Speed
100 Mbps

INTERFACE Connectors Ethernet LED Indicators
16 x RJ45 6-pin removable screw terminal power & relay

Ethernet, Auto Sensing, 10/100BaseTX, Duplex and MDIX

P1, P2, P-Fail, Loop Detection 10/100T X Link/Activity, Speed

Basic Monitoring & Management Capabilities iView2 gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location. It features an intuitive Graphical User Interface GUI that provides a real-life representation of all installed eWorx SE300 Series switches, displaying device functions, port settings, device status information and traffic statistics via SNMP.
iView2 can also configure eWorx SE300 series switches monitoring capabilities for automation applications via the popular Modbus TCP/IP protocol. Control engineers can use existing HMI/SCADA software to integrate the network status by creating extra tags for real-time monitoring. iView2 is a standalone software that supports multiple platforms and operating systems.
iView2 Features for eWorx SE300 series Switches Monitoring
• System information IP/MAC address
• Port status
• Port speed
• Flow control
• Link up counter
• TX packets counter, RX packets counter
• TX error packets counter, RX error packets counter
• Firmware version
• PoE status PoE model/s only

Management
• Configure IP mode
• Set IP address
• Set TCP Modbus/TCP time-out
• Create Community Strings
• Configure Traps
/ Enabling an Intelligent Planet

All product specifications are subject to change without notice. SE316-T_2016

Monitored Ethernet Switch
16 port, SNMP, Modbus/TCP Model SE316-T

Specifications - continued

Specifications - continued

SWITCH PROPERTIES

ENVIRONMENT

MAC Table Size

Operating Temperature -40 ~ 75°C -40 ~ 167°F

Packet Buffer Size
128K bit

Storage Temperature -40 ~ 85°C -40 ~ 185°F

Switching Capacity

Gbps

Operating Humidity 10 ~ 95% non-condensing
Product Ordering Information

MODEL # DESCRIPTION

SE316-T
16-port 10/100 Mbps Monitored Ethernet Switch

RJ45

OPERATING TEMPERATURE
10/100 MBPS

GIGABIT
100FX
100/1000BASE-SFP
-40~75°C

FIBER

COMBO PORT, 10/100/1000BASE-T X OR 100/1000BASE-SFP

TYPE CONNECTOR

Accessories - optional

MODEL #

MDR-40-24

DIN Rail Power supply, 24VDC 40 Watt

C5UMB3FBG
3 ft. 1 M , Gray, Category 5e UTP Patch Cord

C5UMB7FBG
7 ft. 2 M , Gray, Category 5e UTP Patch Cord

Package Checklist

Ethernet Switch, Quick Start Guide, DIN-Rail mount bracket installed , Wall mount bracket

Warranty

Limited lifetime warranty for Advantech B+B designed and/or manufactured products.

Corporate Headquarters 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

Model SE316-T Mechanical Diagram | DIN Rail & Wall Mount Options

Units = [inches] mm
724 20

Corporate Headquarters 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

More datasheets: AOT462_001 | 4412FGL | 18037ACU | 5484BN-BADC-AGJA-PR-MS | 2326-5181TG | 2380-5121TG | 2340-5111TG | 2380-5221TG | 2380-5121TB | 2340-5211TG

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SE316-T Datasheet file may be downloaded here without warranties.

Datasheet ID: SE316-T 521531