2380-5221TG

2380-5221TG Datasheet


Part Datasheet
2380-5221TG 2380-5221TG 2380-5221TG (pdf)
Related Parts Information
2326-5181TG 2326-5181TG 2326-5181TG
2380-5121TG 2380-5121TG 2380-5121TG
2340-5111TG 2340-5111TG 2340-5111TG
2380-5121TB 2380-5121TB 2380-5121TB
2340-5211TG 2340-5211TG 2340-5211TG
PDF Datasheet Preview
3M Pin Strip Header
and x Straight and Right Angle, Solder Tail
2300 Series
• One and two row versions
• Straight and right angle versions
• Tin lead or gold plating available
• Tapered tip does not cut the socket wipe during insertion, reducing operational failure and repairs
• Board retention feature available
• Two-row right angle mates with Pak 100 wiremount sockets anywhere on the board
• See Regulatory Information Appendix RIA for chemical compliance information

Date Modified February 22, 2007

Physical

Insulation Material Glass Filled Thermoplastic Flammability UL 94V-0
Color Black Contact Material Copper Alloy Plating Underplating 50 [ um ] Nickel Wiping Area Tin or Gold See Ordering Information Solder Tails 100 [ um ] 90/10 Tin Lead Marking None

Electrical

Current Rating 3 A Insulation Resistance > 5 x 109Ω at 500 VDC Withstanding Voltage 1000 VRMS at Sea Level

Environmental

Operating Temperature Rating 55°C to +105°C

TS-0766-12 Sheet 1 of 3

UL File No. E68080
3M Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Pin Strip Header
and x Straight and Right Angle, Solder Tail

Straight

C ± See Note 1
2300 Series

D ± See Note 1

See Note 2

See Note 2
± Typ
± Typ
± Typ

Recommended Mounting Hole Pattern

Notes 1.“C” = X pin quantity per row. 2.The recommended PCB hole size for the kinked tail positions on the solder tail connector is ± The kinked tail positions are the first and last position in each row.

Inch
[mm] Tolerance Unless Noted

Inch ± ± ±
[ ] Dimensions for Reference only
Ordering Information
23XX-6XXX XX

Pin Quantity One Row 02-40 Two Row 04-80

Pin Length Dim A 1 = 2 =

Plating

TB = 30u App. E3 & C2 Apply

TG = App. E3 & C2 Apply

TP = Tin-lead App. E3 & C2 Apply

Tail

One Row

Two Row
11 = Solder Tails
21 = Solder Tails
51 = Kinked Solder Tails 81 = Kinked Solder Tails

TS-0766-12 Sheet 2 of 3
3M Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Pin Strip Header
and x Straight and Right Angle, Solder Tail

Right Angle

C ± See Note 1
2300 Series

D ± See Note 1

See Note 2

See Note 2
± Typ
± Typ
± Typ

Recommended Mounting Hole Pattern

Notes “C” = X pin quantity per row. The recommended PCB hole size for the kinked tail positions on the solder tail connector is Ø ± The kinked tail positions are the first and last position in each row. Drawing not to scale. Part details may vary.

Inch
[mm] Tolerance Unless Noted

Inch ± ± ±
[ ] Dimensions for Reference only
Ordering Information

Pin Quantity One Row 02-40 Two Row 04-80

Pin Length Dim A 1 = 2 =
23XX-5XXX XX

Plating

TB = Gold App. E3 & C2 Apply

TG = Gold App. E3 & C2 Apply

TP = Tin-lead App. E3 & C2 Apply

Tail

One Row

Two Row
11 = Solder Tails
21 = Solder Tails
51 = Kinked Solder Tails 81 Kinked Solder Tails

TS-0766-12 Sheet 3 of 3
3M Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-B

CHINA

Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Name and Content of Hazardous Substances or Elements

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronic Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373

RIA-2217-B 3M 2007
More datasheets: 3004 | AOT462 | AOT462_002 | AOT462_001 | 4412FGL | 18037ACU | 5484BN-BADC-AGJA-PR-MS | 2326-5181TG | 2380-5121TG | 2340-5111TG


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2380-5221TG Datasheet file may be downloaded here without warranties.

Datasheet ID: 2380-5221TG 517620