SIL15C-12SADJ-V

SIL15C-12SADJ-V Datasheet

SIL15 Series Single output

Part	Datasheet
SIL15C-12SADJ-V	SIL15C-12SADJ-V (pdf)

Related Parts	Information
SIL15C-05SADJ-H	SIL15C-05SADJ-H
SIL15C-05SADJ-V	SIL15C-05SADJ-V
SIL15C-12SADJ-H	SIL15C-12SADJ-H

PDF Datasheet Preview
SIL15 Series Single output DC/DC CONVERTERS 15A Non-Isolated DC/DC Converters • Ultra-wide trim range 0.9V to 3.3V/5V • Current sink capable for termination applications • Horizontal and vertical models available • High power density design means reduced board space requirement • Power good output signal open collector • Operating ambient temperature up to +80ºC with suitable derating and forced air cooling • Remote ON/OFF active high • 0A minimum load • Input undervoltage lockout • Over-current and short-circuit protection The SIL15 Series is a new high density open frame non-isolated converter for spacesensitive applications. Each model has a wide input range 4.5V to 5.5V or 10.2V to 13.8V and offer a wide 0.9V to 3.3V/5V output voltage range with a 15A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the maximum allowed value for that model. Typical efficiencies are 89% for the 5V input version and 91% for the 12V input version. The SIL15 series offers remote ON/OFF and over-current protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL15 reduces compliance costs and time to market. All specifications are typical at nominal input, full load at 25°C unless otherwise stated 1 NEW Product 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability See Note 5 5V input models 12V input models 0.9V to 3.3V 0.9V to 5.0V Output setpoint accuracy With trim resistors Line regulation Low line to high line max. Load regulation Full load to min. load max. Min/max load 0A/15A Overshoot at turn on 5V input models 12V input models 3% max. 1% max. Undershoot 100mV max. Ripple and noise 5Hz to 20MHz See Note 1 See table Transient response See Note 2 Deviation 100mV 200µs recovery to within regulation band INPUT SPECIFICATIONS Input voltage range 5V input model 12V input model Input current Minimum load Remote OFF Input current max. See Note 3 5V input model 12V input model

PDF Datasheet Preview

SIL15 Series Single output

DC/DC CONVERTERS 15A Non-Isolated DC/DC Converters
• Ultra-wide trim range 0.9V to 3.3V/5V
• Current sink capable for termination applications
• Horizontal and vertical models available
• High power density design means reduced board space
requirement
• Power good output signal open collector
• Operating ambient temperature up to +80ºC with suitable
derating and forced air cooling
• Remote ON/OFF active high
• 0A minimum load
• Input undervoltage lockout
• Over-current and short-circuit protection

The SIL15 Series is a new high density open frame non-isolated converter for spacesensitive applications. Each model has a wide input range 4.5V to 5.5V or 10.2V to 13.8V and offer a wide 0.9V to 3.3V/5V output voltage range with a 15A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the maximum allowed value for that model. Typical efficiencies are 89% for the 5V input version and 91% for the 12V input version. The SIL15 series offers remote ON/OFF and over-current protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL15 reduces compliance costs and time to market.

All specifications are typical at nominal input, full load at 25°C unless otherwise stated
1 NEW Product
2 YEAR WARRANTY

SPECIFICATIONS

OUTPUT SPECIFICATIONS

Voltage adjustability See Note 5
5V input models 12V input models
0.9V to 3.3V 0.9V to 5.0V

Output setpoint accuracy With trim resistors

Line regulation

Low line to high line
max.

Load regulation

Full load to min. load
max.

Min/max load
0A/15A

Overshoot at turn on
5V input models 12V input models
3% max. 1% max.

Undershoot
100mV max.

Ripple and noise 5Hz to 20MHz

See Note 1

See table

Transient response See Note 2

Deviation
100mV 200µs recovery to within regulation band

INPUT SPECIFICATIONS

Input voltage range
5V input model 12V input model

Input current

Minimum load Remote OFF

Input current max. See Note 3
5V input model 12V input model

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SIL15C-12SADJ-V Datasheet file may be downloaded here without warranties.

Datasheet ID: SIL15C-12SADJ-V 518493