DSR850-2
Part | Datasheet |
---|---|
![]() |
DSR850-0 (pdf) |
Related Parts | Information |
---|---|
![]() |
DSR850-FLR |
PDF Datasheet Preview |
---|
Embedded Power for Business-Critical Continuity DSR850-2 850 Watts Multi-Output This is a 2U Power Supply Assembly PSA primarily for an ATX type product, comprising of one or two AC to 12V Power Supplies PSU , and a Power Distribution Unit PDU , mechanical housing and output wiring harness with connectors. Where only one PSU is required, a blank module will be installed in the remaining slot. Special Features PSU = 12vdc/70A 5vsb/2.5A • Wide Range AC Input 90-264vac • Active Power Factor Correction • Active AC Inrush Current Control • Active Current Share +12v main • Droop Current Share 5v Stand-By • Hot Plug Operation • N+1 Redundant w/two PSU’s • Internal OR’ing main 12v and stand-by • Internal Cooling fans 40mm • Red/Green Bi-Color LED Status • I2C Communication Interface Bus • INTEL, SSI Std. Logic Timing • INTEL, SSI Std. FRU Data Format • Intel PSMI Protocol • Internal Fan Speed Control • EN61000-3-2 Harmonic Compliance • EMI Level “B” Conducted & Radiated PDU • Six +12v/16A Rails with 240VA protection • +5V 44A • +3V3 24A • -12V 0.5A • +5VSB 2.5A • Output Harness and Connectors • One Year Warranty PSU 1 PSU 2 PSA Electrical Specifications Available upon request Input Input range 90-264 Vac wide range Frequency AC Inrush current Efficiency Power factor AC input leakage current Hold up time 47-63 Hz, single phase ac 55 A AC maximum inrush current any condition >82% AC to +12 V > 70% all outputs at full load typical mA 240 Vac 20 mS minimum Conducted EMI EN55022 Class B, CFR47 FCC Pt15B, Class B ETS300-132-1, EN61000-3-2, EN61000-3-3, GR-1089 Radiated EMI AC input connector Output PSU EN55022 Class B, CFR47 FCC Pt15A, Class B limit IEC320-C14 with all safety approvals Main DC voltage +12v 70 A Stand-By Voltage Minimum Load Regulation Overcurrent Overvoltage 5.0v 2.5A No Minimum load required +12 Vdc +/-5% Vsb +/-5% 77-105A latches off if Overcurrent state exceeds 1 second +12 V, 5.0vsb V Undervoltage See table page 2 Safety UL/cUL 60950 UL Recognized IEC60950-1/EN60950-1 Compliance CB test report and CB Certificate to IEC60950-1 CE Mark China CCC Embedded Power for Business-Critical Continuity Output PDU 240VA IEC60950-1 +5.00v +3.30v -12.0v +5.0v Stand-by Regulation Overcurrent Communications Intel standard 44 A 24 A See table page 2 See table page 2 PSMI V2.12 compatible FRU Data, Intel compatible SMBus Alert, Intel compatible PMBus available upon request Environmental Specifications Operating temperature -10 - +50, 10,000 feet 50% derating at 70°C Humidity Ordering Information DSR850-2 Complete Power Supply Assembly, Two PSU Redundant N+1 hot plug modules and PDU Cage DSR850-1 Complete Power Supply Assembly, one PSU module one Blank Panel and PDU Cage DSR850-0 Partial Power Supply Assembly, PDU Cage, with no PSU modules or Blank Panels DSR850-FLR Blank Filer Panel Needed to fill the space of a missing PSU to block the air flow DS850-3-005 PSU Power Module 5.0v/2.5A Stand-By Output Harness Pin-outs Connector Dimensions to mate with FCI 10034908-001 Back of PDU Pin Signal Name Pin Signal Name SMBAlert# 20 GND COOLING_FAULT# 21 GND PSU_FAULT# 22 GND PDB_FAULT# 23 GND +5VSB 24 GND +3.3V 25 GND 26 GND 27 GND 28 GND 10 +5V 29 GND 11 +12V4 30 GND 12 +12V4 31 GND 13 +12V4 32 GND 14 +12V5 33 GND 15 +12V5 34 GND 16 +12V5 35 GND 17 +12V6 36 GND 18 +12V6 37 GND 19 +12V6 38 GND PDU Direct Docking Connector Connector Dimensions to mate with FCI 10034908-001 |
More datasheets: MWB100012A-12A | FSTUD16450MTD | 6324/X2C9-1JLA | 17606B | FJNS4211RTA | FJNS4211RBU | M33574 SL001 | M33574 SL005 | M33574 SL002 | FJY3003R |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSR850-0 Datasheet file may be downloaded here without warranties.