TSX00005

TSX00005 Datasheet

Code TSX00005

Part	Datasheet
TSX00005	TSX00005 (pdf)

PDF Datasheet Preview
MKR2UNO ADAPTER Code TSX00005 Simply mount your MKR1000 to this new adapter and plug in any of your UNO shields! The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger. TECH SPECS Operating Voltage Input Voltage recommended Input Voltage limit Analog Input Pins Analog Output Pins Digital I/O Pins DC Current for 3.3V Pin DC Current for 5V Pin Length Width Weight 3.3V 6 1 14 700 mA 700 mA mm 24 g OSH Schematics MKR2UNO is hardware! You can build your own board using the following files EAGLE FILES IN .ZIP SCHEMATICS IN .PDF Please keep in mind that the MKR2UNO is just a form factor adapter and so is NOT present any voltage translation. Be careful before connecting a shield since shield without IOREF level shifting capability may not work properly. Like in many others Arduino boards this adapter allows to power your MKR board using a barrel jack with center positive polarity or the VIN pin on the headers. If you want to use the Arduino MKRZero and the Arduino WIFi shield 101 read the Arduino WIFi shield 101 reference to change module pins. Unlike the Arduino UNO, the MKR2UNO Adapter do NOT have I2C signals on A4 and A5 and SPI on pins 11, 12 and All the pins on the MKR2UNO Adapter are wired one to one from the MKR to the UNO form factor with some exception: MKR form factor pin 0 1 13 14 UNO form factor pin 13 10 0 1

PDF Datasheet Preview

MKR2UNO ADAPTER

Code TSX00005

Simply mount your MKR1000 to this new adapter and plug in any of your UNO shields!

The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger.

TECH SPECS

Operating Voltage Input Voltage recommended Input Voltage limit Analog Input Pins Analog Output Pins Digital I/O Pins DC Current for 3.3V Pin DC Current for 5V Pin Length Width Weight
3.3V 6 1 14 700 mA 700 mA mm 24 g

OSH Schematics

MKR2UNO is hardware! You can build your own board using the following files EAGLE FILES IN .ZIP SCHEMATICS IN .PDF Please keep in mind that the MKR2UNO is just a form factor adapter and so is NOT present any voltage translation. Be careful before connecting a shield since shield without IOREF level shifting capability may not work properly.

Like in many others Arduino boards this adapter allows to power your MKR board using a barrel jack with center positive polarity or the VIN pin on the headers. If you want to use the Arduino MKRZero and the Arduino WIFi shield 101 read the Arduino WIFi shield 101 reference to change module pins. Unlike the Arduino UNO, the MKR2UNO Adapter do NOT have I2C signals on A4 and A5 and SPI on pins 11, 12 and All the pins on the MKR2UNO Adapter are wired one to one from the MKR to the UNO form factor with some exception:

MKR form factor pin 0 1 13 14

UNO form factor pin 13 10 0 1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSX00005 Datasheet file may be downloaded here without warranties.

Datasheet ID: TSX00005 518364