ADNS-5060

ADNS-5060 Datasheet


ADNS-5060 Optical Mouse Sensor

Part Datasheet
ADNS-5060 ADNS-5060 ADNS-5060 (pdf)
PDF Datasheet Preview
ADNS-5060 Optical Mouse Sensor

Data Sheet

The ADNS-5060 is a mainstream, small form factor optical mouse sensor. It is used to implement a non mechanical tracking engine for computer mice.

It is based on optical navigation technology, which measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement.

The sensor is housed in an 8-pin staggered dual inline package DIP . It is designed for use with the HDNS-2100 round lens or HDNS-2100#001 trim lens, HLMP-ED80-xx000, and the HDNS-2200 LED Clip, providing an optical mouse solution that is compact and affordable. There are no moving parts, so precision optical alignment is not required, thereby facilitating high volume assembly.

The output format is a two wire serial port. The current X and Y information are available in registers accessed via the serial port.

The ADNS-5060 is capable of high-speed motion detection up to 30ips and 8g. In addition, it has an on-chip oscillator and built-in LED driver to minimize external components. Frame rate is also adjusted internally.
• Small form factor, pin-to-pin compatible with ADNS-26x0
• Register-to-register compatible with ADNS-26x0
• Built-in LED driver for simpler circuitry
• High speed motion detection up to 30ips and 8g
• Self-adjusting frame rate for optimum performance
• Internal oscillator no clock input needed
• Default 1050cpi resolution, adjustable from 150 to
1350cpi via 150cpi step
• Operating voltage 5V nominal
• Two-wire serial interface
• Optical Mice
• Optical trackballs
• Integrated input devices

CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

Theory of Operation

The ADNS-5060 is based on Optical Navigation Technology, which measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement.

The ADNS-5060 contains an Image Acquisition System IAS , a Digital Signal Processor DSP , and a two wire serial port.

The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the and relative displacement values.

An external microcontroller reads the and information from the sensor serial port. The microcontroller then translates the data into PS2 or USB signals before sending them to the host PC.

Pinout of ADNS-5060 Optical Mouse Sensor

Pin Name

No Connect

No Connect
3 SDIO

Serial Port Data
4 SCLK

Serial Port Clock
5 LED_CNTL Digital Shutter Signal Out
6 GND

System Ground
7 VDD5
5V DC Input
8 REFA

Internal Reference

I/O type

I/O I O Ground Power O

A5060 XYYWWZ

LED_CNTL 5 GND 6 VDD5 7 REFA 8
4 SCLK 3 SDIO 2 NC 1 NC

Figure Package outline drawing top view

Figure Package outline drawing

Overview of Optical Mouse Sensor Assembly

Avago Technologies provides an IGES file drawing describing the base plate molding features for lens and PCB alignment.
More datasheets: AD9625-2.0EBZ | AD9625-2.5EBZ | ACC022 | AT29BV040A-25TC | AT29BV040A-25TI | AT29BV040A-20TI | 50753380931610F | B65811J0250A038 | AK6416AM | 2270


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-5060 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-5060 519984