1D1304-3
1D1304-3 Datasheet
Model 1D1304-3
| Part | Datasheet |
|---|---|
1D1304-3 |
1D1304-3 (pdf) |
| PDF Datasheet Preview |
|---|
| Model 1D1304-3 Hybrid Couplers 3 dB, 90° The 1D1304-3 is a low profile 3dB hybrid coupler in an easy to use surface mount package covering the AMPS and GSM bands. The 1D1304-3 is ideal for balanced amplifiers and signal distribution and can be used in most high power designs. Parts have been subjected to rigorous qualification testing and units are 100% tested. They are manufactured using materials with x and y thermal expansion coefficients compatible with common substrates such as FR4, G-10 and polyamide. Features: • 800 1200 MHz • Low Loss • High Isolation • 90° Quadrature • Surface Mountable • Tape And Reel • Convenient Package • 100% Tested Outline Drawing ELECTRICAL SPECIFICATIONS** Frequency Isolation Insertion Loss dB Min dB Max VSWR Max:1 815 960 800 1200 Amplitude Balance dB Max 21 Phase Balance Degrees Power Ave. CW Watts ΘJC ºC/Watt Operating Temp. -55 to +85 -55 to +85 **Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 nominal impedance. Specifications subject to change without notice. Top View Near-side Side View Bottom View Far-side Pin 1 Pin 2 Pin 2 Pin 1 Pin 4 Denotes Array Number Pin 3 GND Pin 3 Pin 4 Part Is Symmetric About All Axis |
| More datasheets: H1DXS-1036M | H3DDS-1036G | H3DDS-1006G | HW300A | 74F112SCX | 74F112SJX | 74F112SC | 74F112SJ | 74F112PC | 74F182PC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1D1304-3 Datasheet file may be downloaded here without warranties.