HMC5457MS8GE

HMC5457MS8GE Datasheet

HMC5457MS8GE

Part	Datasheet
HMC5457MS8GE	HMC5457MS8GE (pdf)

Related Parts	Information
HMC5457MS8GETR	HMC5457MS8GETR

PDF Datasheet Preview
v00.0808 HMC5457MS8GE GaAs MMIC 10 WATT T/R SWITCH DC - 4 GHz SWITCHES - SPDT - SMT 11 - 2 The HMC5457MS8GE is ideal for • Cellular / 4G Infrastructure • WiMAX, WiBro & Fixed Wireless • Automotive Telematics • Mobile Radio • Test Equipment Functional Diagram Input P1dB +40 dBm Vdd = +8V High Third Order Intercept +62 dBm Positive Control +3 to +10V Low Insertion Loss dB MSOP8G Package mm2 The HMC5457MS8GE is a high power SPDT switch in an 8-lead MSOPG package for use in transmit-receive applications which require very low distortion at high input signal power levels. The device can control signals from DC to 4 GHz. The design provides exceptional intermodulation performance > +60 dBm third order intercept at +8V bias. RF1 and RF2 are reflective shorts when “OFF”. On-chip circuitry allows single positive supply operation from +3 Vdc to +10 Vdc at very low DC current with control inputs compatible with CMOS logic families. Electrical Specifications, TA = +25° C, Vctl = 0/Vdd, Vdd = +8V Unless Otherwise Stated , 50 Ohm System Parameter Frequency Min. Typ. Insertion Loss DC - GHz DC - GHz DC - GHz DC - GHz DC - GHz Isolation DC - GHz Return Loss On State DC - GHz DC - GHz DC - GHz DC - GHz Input Power for 0.1dB Compression Vdd = +3V Vdd = +5V - GHz Vdd = +8V Input Power for 1dB Compression Vdd = +3V Vdd = +5V - GHz Vdd = +8V - GHz Input Third Order Intercept - GHz Two-tone input power = +30 dBm each tone - GHz - GHz [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [2] Circuit Board Material Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at 11 - 9

PDF Datasheet Preview

v00.0808

HMC5457MS8GE

GaAs MMIC 10 WATT T/R SWITCH DC - 4 GHz

SWITCHES - SPDT - SMT
11 - 2

The HMC5457MS8GE is ideal for
• Cellular / 4G Infrastructure
• WiMAX, WiBro & Fixed Wireless
• Automotive Telematics
• Mobile Radio
• Test Equipment

Functional Diagram

Input P1dB +40 dBm Vdd = +8V High Third Order Intercept +62 dBm Positive Control +3 to +10V Low Insertion Loss dB MSOP8G Package mm2

The HMC5457MS8GE is a high power SPDT switch in an 8-lead MSOPG package for use in transmit-receive applications which require very low distortion at high input signal power levels. The device can control signals from DC to 4 GHz. The design provides exceptional intermodulation performance > +60 dBm third order intercept at +8V bias. RF1 and RF2 are reflective shorts when “OFF”. On-chip circuitry allows single positive supply operation from +3 Vdc to +10 Vdc at very low DC current with control inputs compatible with CMOS logic families.

Electrical Specifications, TA = +25° C, Vctl = 0/Vdd, Vdd = +8V Unless Otherwise Stated , 50 Ohm System

Parameter

Frequency

Min.

Typ.

Insertion Loss

DC - GHz

DC - GHz

DC - GHz

DC - GHz

DC - GHz

Isolation

DC - GHz

Return Loss On State

DC - GHz

DC - GHz

DC - GHz

DC - GHz

Input Power for 0.1dB Compression

Vdd = +3V

Vdd = +5V - GHz

Vdd = +8V

Input Power for 1dB Compression

Vdd = +3V

Vdd = +5V - GHz

Vdd = +8V
- GHz

Input Third Order Intercept
- GHz

Two-tone input power = +30 dBm each tone
- GHz
- GHz
[1] Reference this number when ordering complete evaluation PCB

The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request.
[2] Circuit Board Material Rogers 4350

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at
11 - 9

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC5457MS8GE Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC5457MS8GE 636248