EVAL-AD5697RSDZ

EVAL-AD5697RSDZ Datasheet

EVAL-AD5697RSDZ EVALUATION BOARD

Part	Datasheet
EVAL-AD5697RSDZ	EVAL-AD5697RSDZ (pdf)

PDF Datasheet Preview
EVAL-AD5697RSDZ EVALUATION BOARD One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel • Fax • Preliminary Technical Document Evaluation Board for AD5676R, Dual, 12-Bit, Serial Voltage-Output DAC Full-featured evaluation board for the AD5697R On-board reference Various link options PC control in conjunction with Analog Devices System development platform SDP PC software for control of DACs On-board ADC for voltage readback PACKAGE CONTENTS AD5697R evaluation board AD5697R device CD that includes Self-installing software that allows users to control the board and exercise all functions of the device Electronic version of the datasheet Electronic version of EVAL-AD5697RSDZ application note The Analog Devices, Inc., AD5697R evaluation board is designed to help customers quickly prototype new AD5697R circuits and reduce design time. The AD5697R operates from a single V to V supply. The part incorporates an internal Von-board reference to give an output voltage span of V or 5 V. The on-chip reference is on at power-up The part must be written to after power-up to turn off the internal reference. Full data on the AD5697R may be found in the data sheet available from Analog Devices and should be consulted in conjunction with this data sheet when using the evaluation board. The evaluation board interfaces to the USB port of an IBM compatible PC via the SDP board. Software is available with the evaluation board which allows the user to easily program the AD5697R. The software has a simulation mode option to mimic the operation of the DAC without the use of the evaluation board. The System Demonstration Platform board can be ordered separately via EVAL-AD5697RSDZ EVALUATION BOARD HARDWARE POWER SUPPLIES To power the AD5697R evaluation board supply 6V between the 6V terminal and GND inputs for the analog supply. All supplies are decoupled to ground with 10 µF tantalum and µF ceramic capacitors. Table Power Supply Connector Connector No. Voltage External Logic/Digital positive power supply, VDD. Analog positive power supply, VDD. Analog positive power supply, to ADP3331. For single-supply operation, supply 6V. Application Note LINK OPTIONS A number of link and switch options are incorporated in the evaluation board and should be set for the required operating setup before using the board. The functions of these link options are described in detail in Table 2 describes the positions of the different links to control the evaluation board by PC, via the USB port, using the AD5669 is single-supply mode. Table Link Options Setup for SDP Control Default Link No. Options DESERTED Table Link Functions Link No. Option This selects the power source for the AD5697R: • Position A selects internal VDD coming from the ADP3331 • Position B selects the use of an external supply J2 . This link selects the logics source for the AD5697R: • Position A selects VIO, the voltage supply from the System Demonstration Platform. • Position B selects EXT_VLOGIC J1 . • Position C selects VDD power source See LK1 . This link selects the reference source for AD5697R: • Position A selects the AD5696R’s U7 2.5V on-chip reference. • Position B selects the ADR431. • Position C selects the REF195. • Position D selects the external SMB connector EXT_REF. ORDERING INFORMATION COMPONENTS LIST Table Qty Reference Designator 1 U5 1 U7 10 C2,C4,C6,C10,C11,C12,C15,C21,C22,C23 2 R4, R11 4 R17, R18, R20, R21 2 R8, R9 8 C1, C3, C5, C7, C8, C9, C16, C20 1 R2 1 R3 1 C14 2 R23, R24 1 R1 1 L1 9 EXT_REF, VOUTA1, VOUTA2, VOUTB1, VOUTB2, VOUTC1, VOUTC2, VOUTD1, VOUTD2 3 J1-3 2 Lk2, Lk3 1 J4 1 J5 Lk4, LK5, Lk6 9 TP1-9 1 U1 1 U2 1 U3 1 U6 Description Quad, 16bit, DAC Quad, 16bit, DAC 0.1µF Capacitor Resistor 10 µF Capacitor 1M Resistor 1µF Capacitor Resistor Inductor, 600 ohms 100MHz PCB Mount SMB Jack 2 Pin Terminal Block 5mm Pitch 6/8 Pin Header & Shorting Block 120-Way Female Connector, 0.6mm Pitch 10 Pin 2x5 Pitch SMT Header JUMPER BLOCK USING 3 PIN SIP HEADER Test Point Adjustable LDO Regulator 32K I2C Serial EEPROM +5V Fixed, Adjustable Voltage Regulator XREF Voltage Reference Application Note Supplier/Part Number AD5694BUZ/AD5696BUZ AD5694BRUZ/AD5696BRUZ FEC 8820023 FEC 9333681 FEC 9330402 FEC 933-0399 FEC 197-130 Digikey RMCF1/161MFRCT-ND FEC 9331832 FEC 318-8840 FEC 157 7611 Digikey 541-300KHCT-ND Digikey 490-1024-1-ND FEC 1206013 FEC 151789 FEC 150-411 FEC 1324660 FEC 1022244 FEC 1022248 FEC 8731144 Pack ADP3331ARTZ FEC 1331330 ADP3367ARZ ADR435ARZ NOTES AN0XXXX

PDF Datasheet Preview

EVAL-AD5697RSDZ EVALUATION BOARD

One Technology Way
• P.O. Box 9106
• Norwood, MA 02062-9106, U.S.A.
• Tel
• Fax
•

Preliminary Technical Document Evaluation Board for AD5676R, Dual, 12-Bit, Serial Voltage-Output DAC

Full-featured evaluation board for the AD5697R On-board reference Various link options PC control in conjunction with Analog Devices System development platform SDP PC software for control of DACs On-board ADC for voltage readback

PACKAGE CONTENTS

AD5697R evaluation board AD5697R device CD that includes

Self-installing software that allows users to control the board and exercise all functions of the device

Electronic version of the datasheet Electronic version of EVAL-AD5697RSDZ application note

The Analog Devices, Inc., AD5697R evaluation board is designed to help customers quickly prototype new AD5697R circuits and reduce design time. The AD5697R operates from a single V to V supply. The part incorporates an internal Von-board reference to give an output voltage span of V or 5 V. The on-chip reference is on at power-up The part must be written to after power-up to turn off the internal reference. Full data on the AD5697R may be found in the data sheet available from Analog Devices and should be consulted in conjunction with this data sheet when using the evaluation board. The evaluation board interfaces to the USB port of an IBM compatible PC via the SDP board. Software is available with the evaluation board which allows the user to easily program the AD5697R. The software has a simulation mode option to mimic the operation of the DAC without the use of the evaluation board. The System Demonstration Platform board can be ordered separately via

EVAL-AD5697RSDZ

EVALUATION BOARD HARDWARE

POWER SUPPLIES

To power the AD5697R evaluation board supply 6V between the 6V terminal and GND inputs for the analog supply.

All supplies are decoupled to ground with 10 µF tantalum and µF ceramic capacitors.

Table Power Supply Connector

Connector No. Voltage

External Logic/Digital positive power supply,

VDD.

Analog positive power supply, VDD.

Analog positive power supply, to ADP3331.

For single-supply operation, supply 6V.

Application Note

LINK OPTIONS

A number of link and switch options are incorporated in the evaluation board and should be set for the required operating setup before using the board. The functions of these link options are described in detail in Table 2 describes the positions of the different links to control the evaluation board by PC, via the USB port, using the AD5669 is single-supply mode.

Table Link Options Setup for SDP Control Default

Link No.

Options

DESERTED

Table Link Functions

Link No.

Option

This selects the power source for the AD5697R:
• Position A selects internal VDD coming from the ADP3331
• Position B selects the use of an external supply J2 .

This link selects the logics source for the AD5697R:
• Position A selects VIO, the voltage supply from the System Demonstration Platform.
• Position B selects EXT_VLOGIC J1 .
• Position C selects VDD power source See LK1 .

This link selects the reference source for AD5697R:
• Position A selects the AD5696R’s U7 2.5V on-chip reference.
• Position B selects the ADR431.
• Position C selects the REF195.
• Position D selects the external SMB connector EXT_REF.
ORDERING INFORMATION

COMPONENTS LIST

Table Qty Reference Designator 1 U5 1 U7 10 C2,C4,C6,C10,C11,C12,C15,C21,C22,C23 2 R4, R11 4 R17, R18, R20, R21 2 R8, R9 8 C1, C3, C5, C7, C8, C9, C16, C20 1 R2 1 R3 1 C14 2 R23, R24 1 R1 1 L1 9 EXT_REF, VOUTA1, VOUTA2, VOUTB1,

VOUTB2, VOUTC1, VOUTC2, VOUTD1, VOUTD2 3 J1-3 2 Lk2, Lk3 1 J4
1 J5 Lk4, LK5, Lk6
9 TP1-9 1 U1 1 U2 1 U3 1 U6

Description Quad, 16bit, DAC Quad, 16bit, DAC 0.1µF Capacitor Resistor 10 µF Capacitor 1M Resistor 1µF Capacitor Resistor Inductor, 600 ohms 100MHz PCB Mount SMB Jack
2 Pin Terminal Block 5mm Pitch 6/8 Pin Header & Shorting Block
120-Way Female Connector, 0.6mm Pitch
10 Pin 2x5 Pitch SMT Header JUMPER BLOCK USING 3 PIN SIP HEADER Test Point Adjustable LDO Regulator 32K I2C Serial EEPROM +5V Fixed, Adjustable Voltage Regulator XREF Voltage Reference

Application Note

Supplier/Part Number AD5694BUZ/AD5696BUZ AD5694BRUZ/AD5696BRUZ FEC 8820023 FEC 9333681 FEC 9330402 FEC 933-0399 FEC 197-130 Digikey RMCF1/161MFRCT-ND FEC 9331832 FEC 318-8840 FEC 157 7611 Digikey 541-300KHCT-ND Digikey 490-1024-1-ND FEC 1206013

FEC 151789 FEC 150-411 FEC 1324660 FEC 1022244 FEC 1022248 FEC 8731144 Pack ADP3331ARTZ FEC 1331330 ADP3367ARZ ADR435ARZ

NOTES

AN0XXXX

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVAL-AD5697RSDZ Datasheet file may be downloaded here without warranties.

Datasheet ID: EVAL-AD5697RSDZ 517900